Mini 1.25G Media Converter(kit #1), SFP Slot, with a SFP Module, MMF, 850-nm, 550-m
Small size: nearly 50% smaller than traditional converters. Its compact modular design facilitates deployment in a narrow desktop location to save space..
1x RJ45 Port: 10M/100M/1000M, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover, conform to IEEE 802.3/802.3u/802.3z/802.3ab, UTP/STP Cat.5e for 100 meters..
Smart Management: LED indicators for PWR, FX, 1000, LINK can dynamic feedback link connection state and fault detection to easily monitor network status.
DIP switch for LFP, 9K, Flow Control,100/1000 can support LFP (Link Loss Propagation) feature.
the max 9000 byte Ethernet packet, jumbo frames supported.
Easy Installation and Use: Modulization configuration design, support hot-swappable, plug and play. 2 side heat dissipation holes and durable metal shell helps dissipate heat under extreme conditions. The working temperature range is 0°C-50°C (32°F-122°F)..
What You Get: 1x 1.25G SFP Slot Media Converter.
1x 1000Base-SX SFP Module, 1x Power Adapter(5V1A, UL Certified).
1x User Manual. 30-day Money-Back guarantee with 1 Year warranty and lifetime tech support..
Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).
Dorhea 3PCS BLE 4.0 Bluetooth Module AT-09 for Ardu-ino CC2540 CC2541 BLE Serial Wireless Module Compatible with HM-10
The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
DC-DC Buck Converter Module 12V to 5V Micro USB Power Adapter Compatible with Ring Alarm Keypad 1 Piece
12V to 5V USB converter: input voltage: DC8-20V, 12V changes to 5V.
Micro USB connector and high conversion: our DC to DC converters have Micro USB charging ports.
DC to DC buck converter has an integrated switch thin regulator module, and the conversion rate is as high as 96 percent.
Intelligent protection: 12V to 5V DC converter adopts intelligent micro-processing chip, which can automatically protect against overvoltage, overcurrent, overtemperature and short circuit.
All epoxy sealed containers have waterproof housings.
Wide application: DC converter module 12V to 5V will be suitable for GPS navigation, driving recorder, electronic dog, car radio, car audio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, driving recorder, LCD TV, LED, etc..
Warm prompt: those devices' power must be lower than 15W when use this DC/DC converter 12V to 5V, and will not be compatible with partial Samsung phones.
Cable Matters HDMI Extender Balun - Wall Mount HDMI Over Ethernet Extender with TCP/IP Support for 1-to-Many Setup 1080p 60Hz up to 328 Feet (100m) - Support Local Monitor Loop-Out
Extend any audio/video HDMI connection between a computer, Blu-ray player, media streamer, or gaming console to a HDTV, monitor or projector over a single Cat 6 UTP/STP cable with this HDMI to Ethernet adapter converter.
HDMI over Cat5e/Cat6 cabling operates up to 328 feet.
HDMI Balun Extender boxes are surface mountable with included brackets and screws.
The HDMI over Ethernet extender comes with bonus 2-Pack of High Speed HDMI cables.
Connect the HDMI Ethernet extender directly with a single cable or through a dedicated unmanaged network switch over Cat 6 cabling.
Do not connect through a LAN or router with other data traffic.
Connect up to 8 additional displays by adding Receiver Boxes (sold separately) through an unmanaged, dedicated Gigabit Ethernet network switch without QoS such as the TP-LINK TL-SG1005D Gigabit Desktop Switch.
Lab tested with the TRENDnet 8-Port Unmanaged Gigabit Switch, TEG-S81g.
Control a DVD player or other HDMI video source from a remote location with the included IR cables that forward commands over a dedicated DDC channel for convenience and security.
The Ethernet to HDMI adapter converter is compatible with HDCP compliant equipment for viewing copy protected content and integrating with HDMI switch, splitter, or matrix e....
DTECH USB to Serial Adapter Cable with RS232 DB9 Male Port FTDI Chipset Supports Windows 10 8 7 and Mac Linux - 4 Feet
(It's NOT 15 pin VGA Monitor Cable) The Male Serial to USB cable (9 pin to USB A male) allows your PC to connect RS-232 serial devices and programs that communicate through COM ports.
USB to serial adapter is designed for connecting serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode scanner, label writer, serial modem, digital camera, card reader, palm PC and digital organizer, etc.
USB to RS232 cord for Windows 10, 8.1, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later.
FTDI USB to serial cable is built with a high performance quality processor chip (FT232 Chipset), which makes it one of the most reliable com port to usb adapter on the market.
4ft DB9 serial port to USB converter with LED light helps you check the connection status easily.
2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
