FUEL PUMP - This pressure gauge set can be used to test fuel pump pressure, emission control devices, leaky, stuck open or burnt valves. Clogged muffler, turbo or exhaust system. Helps to locate leaks in the gas line, valve timing, worn out rings and seals, heating and air conditioning components..
CAR VACUUM TESTER - Also can be used for testing engine vacuum lines, brake assist system, carburetor and intake manifold for leaks, vacuum or pressure loss. Set includes a variety of adapters suitable for most vehicles.
Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)..
PRESSURE GAUGE - The gauge has 4 inches diameter large scale, color-coded measurement, rubber surrounded protective and a hook on the top. so it’s easy to read and use. Range of vacuum dials is 0-28in/Hg Vac, 0-70cm/Hg.
Range of pressures dials is 0-10 psi/g, 0-0.7 kg/cm2..
HOSE AND ACCESSORIES - The kit comes with a 2ft/61cm rubber hose (13/64-inch ID and 23/64-inch OD). The max working pressure is 40PSI. Other accessories include (1)conical adapter, (1)plastic connector, (1) 1/4”x18 male to 1/8”-27 female adapter, (1)1/8”-27 male to 7/32”barbed fitting adapter, (1)1/8”-27 female to 3/8”male adapter, (1)T-type 7/32”barded ....
SPEEDWOW 2.0 Inch Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS
Exhaust clamp is used for 2.0 Inch OD to 2.0" OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
WARRANTY - SPEEDWOW provide 2.0 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
SPEEDWOW 3.0 Inch Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS
Exhaust clamp is used for 3.0 Inch OD to 3.0" OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
WARRANTY - SPEEDWOW provide 3.0 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
...g-resistant Working Gloves,1 piece of pvc electrical tape..
✅ 【 Dryer Vent Duct LOW NOISE SILENCER】Keep your ventilation system free of rips and pin holes. 4 layer Thickness ( 2 layers aluminum foil + Black Thick PVC film + steel wire)Thick layer of Black PVC of Cuchiilo ducting prevents light leaks.Works with exhaust and intake fans, carbon filters which are 4" in diameter.
✅ 【HIGH TEMP RESISTANT 4 INCH AIR DUCT】Flexible 4 inch dryer vent hose is fire resistant and no toxic gas release in high temperature.And the temperature range is from -30 degree to 150 degree..
✅【FLEXIBLE AND EASY TO USE Dryer Duct Hose】Cuchiilo 4 Inch Duct is super flexible and easy to install, it will be right on your Duct Fan, Vent Exhaust, Carbon Filter.Use the screw driver to tighten the hose and clamps, the air ducting is flexible to bend with any angle. You can cut the length of ducting you need, very convenient..
✅【Non-insulated Duct VARIETY OF APPLICATIONS】Flexible Dryer Vent Hose is applicable for tumble dryer, kitchen or bathroom extractor fan, grow tent, green room, small workshop and industrial use, help to air circulating and ventilating, provide a good environment for you..
SPEEDWOW 2.5 Inch 2 1/2 Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS
Exhaust clamp is used for 2.5 Inch OD to 2.5"OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
WARRANTY - SPEEDWOW provide 2 1/2 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
GasOne 2 Pack Propane Tank Gauge Level Indicator Leak Detector Gas Pressure Meter for RV Camper, Cylinder, BBQ Gas Grill, Heater and More Appliances-Type 1 Connection
3 PC OF GAS ONE PROPANE GAUGE - NO MORE GUESSING GAMES, The days of having to guess how much propane is left in your tank are over. Gas One’s Propane Gauge allows for users to see how much fuel they have left in an instant. Installed with three levels of indication and a meter to show the level of propane left in your container.
UNIVERSAL FITTING CONNECTION - Gas One’s Propane Gauge has a universal fitting (QCC-1) made for standardized 5-20lb propane gas tanks. An easy to install connection for the purpose of reading an accurate propane level.
SOLID BRASS CONNECTION - Built with a solid brass construction to ensure a sturdy and durable connection, with sufficient heat resistance.
EASY HASSLE-FREE CONECTION - Ready to use right out the box, just simply attach Gas One’s Propane Gauge on to your standard propane tank and it’s ready for use.
EASY TO READ, COLORED INDICATOR - Gas One’s Propane Gauge has a meter that reacts to the pressure of the propane tank. There are three-built-in indicator levels labeled “Refill, Low Gas, Gas” to ensure an easy and accurate reading.
Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)
5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Exhaust clamp will come with plastic sticker to protect the band.
you can use with it or you can remove the protection sticker off before using.
Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel
Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Knitting Gauge: 14 sts x 20 rows = 4" (10 cm) square on 6 mm, US - 10 Needles.
Crochet Gauge: 10 sc x 10 rows = 4" (10 cm) square on 6.5 mm, US - K/10.5 Hook.
Care: Machine wash (initial water temp. should not exceed 105F/40C) | Machine dry (may be regularly used at the hottest available temp.) | Do not bleach | Do not iron.
