Best Exhaust Header Reducer

RED LAVA EXHAUST PIPE HEAT WRAP 2 x 50 MOTORCYCLE HEADER INSULATION

  • LEDAUT 2 Roll 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties.
  • Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your....
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat..
  • The thermal heat wrap reduces heat under hood up to 50% and improving car And motorcycle Performance.
Check Stock

LEDAUT Exhaust Heat Wrap Heat Shield Sleeve Tape 2 x50 Black Motorcycle with Stainless Steel Zip Ties + 2in Hose Clamps

  • 1/16" x 2" x 50' Roll black fiberglass exhaust heat wrap wiht locking ties(pack of 15) + 2in Hose Clamps..
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures a realistic 50% ..
  • Durable, tight woven, easy heat shield insulation .Protect the hose of the engine system and also Protects drivers and mechanics from burns..
  • Read the instruction first when start to wrap it ,Wrap headers to protect plug wires,downpipes to increase velocity, motorcycle pipes to prevent leg....
  • Good for exhaust pipes insulation .Great improving car and motorcycle performance. High resistance to abrasions, oil spills, temperatures and....
Check Stock

KYN for Duke 250 390 2021, 250 Adventure 2021, 390 Adventure 2020 2021 Motorcycle Exhaust Muffler Mid Link Pipe with Heat Shield 250 ADV 390 ADV, silver, free

  • For Duke 250 390 2021 , 250 Adventure 2021 , 390 Adventure   2020 2021.
  • Enter the 2020 390 Adventure. The baby brother of the 790 / 1290 Adventure bike series, the 390 Adventure brings a lot of the same fun, in a much lighter and smaller package. This bike will get places some of the bigger bikes wont. Released with some class leadings electronics, such as the ride by wire throttle body, Traction Control, Slipper Clutch and ABS all as standard. The stout 373.3CC engine delivers 32kW of power and 37nm of torque..
  • Once combined with the Slip-On Line exhaust, this optional header offers a significant improvement in performance across the entire rev range. Made from perfectly formed 304 Stainless Steel the addition of this header increases throttle response and power control, and improves the sound to make the most of the 390 Adventure s engine character on any ride..
  • It can be installed with the original exhaust pipe of the motorcycle. NO NEED to cut the ..
  • Easy to install, No Installation Instruction We will give you a sticker as a gift after you submit your order..
Check Stock

Design Engineering 010058 EXO Series Black 1.5 x 30 Exhaust and Pipe Wrap

  • Designed to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt.
  • Dual-layer design, using a combination of hi-temp glass fiber, for long term durability.
  • Maintains high heat protection while offering superior abrasion and impact protection.
  • 1.5-inch width makes it easy to install on any type of header, exhaust pipe or exhaust system.
  • The stainless steel exoskeleton locks together when overlapped keeping the wrap tight.
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

Design Engineering 010123 2' x 25' Pipe Wrap Kit with 4 Locking Ties - Titanium

  • Reduces unwanted and harmful heat under the hood, and from entering the driver compartment.
  • Improves horsepower performance and can be used on everyday vehicles, motorcycles, street rods, and more.
  • Wrap sections of exhaust and tail pipe to reduce heat from entering vehicle interior.
  • wrap motocycle pipes to prevent leg burns.
  • Kit includes one roll of 2" x 25' exhaust wrap and four 8" stainless steel locking ties to secure wrap.
Check Stock

Handmo 2 into 1 Exhaust for Harley Touring 1995-2016 Models, Baffled Exhaust Pipes for Harley-Chrome

  • YOSHIMURA RS-2 STAINLESS FULL SYSTEM W/ CARBON CAN & SS ENDCAP FOR 2017-2020 Kawasaki Z125 Pro, 14120AB251.
  • Weight: 2.9 lbs lighter than stock configuration.
  • Stainless steel header and tail-pipe with Carbon canister & Stainless steel cone end-cap.
  • ** PLEASE NOTE: THIS LISTING IS FOR THE EXHAUST ONLY....COMPLETE BIKE NOT FOR SALE....PHOTOS TO SHOW EXHAUST ON BIKE**.
Check Stock

NICECNC Motorcycle Stainless Steel Slip On Exhaust Header Down Pipe & Exhaust Mid Pipe for Kawasaki Ninja 300 EX300 2013 2014 2015

  • Condition:100% Brand New AFTERMARKET PARTS,Qty.: 1 x Set Exhuast Fipe (Header & Mid ).
  • Material: Stainless Steel,Color: Polished,Designed to replaces the stock pipe and increase the power performance.
  • Full stainless steel made exhaust header mid or link pipes.
  • Joint is designed to fit all 51mm slip-on type mufflers.
  • Includes necessary mounting hardwares,Easy to install,no instruction.
Check Stock

BETTERCLOUD 16PCS 3 76mm 304 Stainless Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit

  • Made In the USA 3.00 inch X Pipe Universal These Are NOT Mandrel Bent.
  • Add an “X” pipe Kit to Create Dual Exhaust.
  • Kit includes Heavy 16 GAGE 3.00 DIA BY 11.00" inch About 55.00 Inches Long Assembled (4) 20.00" Long Pipes + 3.00 inch Header Collectors and Clamps.
  • Exhaust Cross Over X Pipe (Please measure to make sure this fits your Car or Truck) This is not a direct Replacement it is Aftermarket.
Check Stock

GREHUA Upgrade Carburetor Adapter Exhaust Pipe Muffler Jet Kit for Predator 212cc 196cc 6.5Hp Trailmaster Baja Massimo MB200 GX160 GX200 Mini Bike Go Kart Engine Performance Parts Silver

  • FITMENT—fit for go kart engine mini bike performance parts generator powered by predator 212cc 196cc 6.5hp GX160 GX200 Baja Massimo MB200 Trailmaster MB200 Hammerhead 80T..
  • HIGH PERFORMANCE—it's the predator 212cc performance parts stage 2 upgrade carburetor adapter exhaust pipe muffler kit.It's a simple job to upgrade go kart engine mini bike exhaust pipe, can make the bigger flow more smoothly and let the exhaust flow more smoothly to promote greater power and stronger filtering effect..
  • COMPLETE ACCESSORIES—with excellent wear resistance and corrosion resistance and exhaust pipe muffler kit, complete accessories can bring you a lot of convenience, but also better update your go kart and mini bike..
  • PACKAGE INCLUDED—1 x carburetor,1 x adapter kit,1 x header exhaust pipe muffler,1 x spark plug,2 x nut,2 x screw,4 x gaskets,2 x lock washer,3 x main jet(.036" & .037").
  • NOTE—please check as much as possible to the item picture, model and size carefully before purchasing.And this exhaust pipe will change color due to the high heat generated by the engine.Or....
Check Stock