CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
Keep well oiled, not for use on stainless steel.
EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
Work in cramped spaces with one-handed rotation.
The cushion grip handles ease pressure on your hand while you increase your grip.
BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
The head of the exhaust cutting tool won’t bend from during rotation.
CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
Keep well oiled, not for use on stainless steel.
EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
Work in cramped spaces with one-handed rotation.
The cushion grip handles ease pressure on your hand while you increase your grip.
BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
Erweater 2 Roll 2″ x 50ft Titanium Exhaust Wrap Header Wrap Roll Kit, for Motorcycle Car Manifold Header Pipe Heat Wrap Tape with 10pcs Stainless Ties
Made of high quality thickened fiberglass material with locked edges on both sides for easy breakage. Exhaust pipe wrap can reduce the heat under the hood by up to 50%, improving the performance of cars and motorcycles..
It can work for a long time at high temperature from 900 to 1000 degrees Celsius! Stronger and more durable for improved thermal performance and reliability Highly resistant to wear, oil leaks, temperature and vibration damage..
Extremely flexible for a tight and secure wrap. Improved horsepower performance for automotive exhaust header wraps, motorcycle exhausts, gas pipes and other custom applications..
Soak header heat wrap in water prior to installation so the fiberglass doesn’t fly around. Put on gloves (not included), wrap it around the exhaust pipe, secure it with an overlap (like the grip of a tennis racket), and simply secure the ends with stainless steel ties..
Package includes two 2″ x 50 ft rolls of heat wrap, 10 stainless steel zipper ties. If you have any questions or are not satisfied, please feel free to contact us..
◇【Works Universally】– The motorcycle exhaust pipe is a universal fitment product that will fit most motorcycles with 35mm-51mm diameter models.
◇【Many colors to choose】–This universal muffler exhaust pipe muffler tip has some different colors to choose, which can give your motorcycle a new look.
◇【High quality】–Muffler exhaust pipe use high quality stainless steel, which is durable, corrosion resistance and rustproof.
◇【Easy installation】– Stainless steel motorcycle exhaust pipe muffler only needs simple welding to fit pipe below 51mm, is very easy to install. But professional Installation is Highly Recommended.
◇【Quality warranty 】– We supply 90 days quality warranty. We will serve you within 24 hours whenever you have question on our Motorcycle Exhaust Pipe Muffler Tip, and we will take back your money if meet any quality problem, no worry about waste the money!.
Installation method: remove the old one and install the new one..
Note: We are a professional manufacturer of auto parts, if you have any questions, you can contact us at any time, we will answer you within 24 hours..
Bright decoration:The surface is polished, and the decorates your exhaust pipe, used to reduce the damage of automobile exhaust pipe due to long-term sewage and exhaust gas, and extend the life of exhaust pipe..
Durable:protect your original pipe from the sun and rain,avoid and deformation.Increase exhaust pressure and reduce exhaust noise effectively..
Replacement: Easy to use, no damage to the car, not easy to fall off, firmly installed on the car..
Carbon Fiber Exhaust Tip 3 Inch Inlet 4 Inch Outlet Burnt Blue 3 Inch Exhaust Tips Muffler Tip
【Purchase Guide】 Remove the exhaust tip from the original car and make sure the outer diameter of the exhaust pipe is 3 inch(77mm)..
【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3.0 inch..
【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid rusting and deformation..
【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high temperatures.Also can decorate the car, increase the beauty of the car, enhance the driving experience..
【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
The Bike Shield Tourer (Large) Motorcycle Cover Shelter Storage Tent Garage
The Bike Shield has to be secured to the ground. NEW EASY ASSEMBLY INSTRUCTION AND VIDEO. Easy and self-enclosing motorcycle storage, shelter, tent, garage, cover unit, protected against any external damage.
1 year warranty. 16 square pipes, cross plate and locking system are all galvanized, keep motorcycle safe and secure..
100% waterproof, very heavy polyurethane coating on inside entire 2000mm H2O/m, the highest water repellence process on outside and protects from harmful UV light..
For dehumidification of inside of the bike shield, ventilation windows are equipped..
Convenience, No contact to exhaust pipe and cover, just park and cover, all in just 3 seconds..
LEDAUT 2\x 50' Twill Weave Motorcycle ATV Titanium Exhaust Heat Shield Wrap with 11.8\ Locking Ties (Pack of 15)
Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Motorcycle Exhaust Middle Pipe Muffler Mid-Pipe Adapter Link Connector for Honda CBR500R CB500X CBR400R CB400X
【Perfect Connect】The middle link exhaust pipe is a significant part for connecting with your tail pipe, makes your motorcycle to be more aggressive. Precision cast to make sure its easy installation and perfect fitment..
【Special Fitment】The exhaust middle pipe is designed for the Ninja 300 Z250 Z300 2013-2016 ,this exhaust link pipe is designed Fordrivers who need the highest performance of motorcycles, fashion design style, a great accessory to dress up your rides..
【Attractive Performance】The motor exhaust middle pipe is 100% brand new by professional manufactury ,it has good performance in reducing the exhaust noise and temperature,due to the perfect design, the pipe can make your motorcycle roar with outstanding sound and helps to obtain maximum output, increase the exhaust performance, you can directly replace your old or broken one without worry..
【Fashion and Stylish】The connect pipe can enhance the layering of the motorcycle with dazzling style, it's not easy to fall off and fade, provides beauty and practicality,the the pipe is stylish and stylish, with additional decorations,giving your motor a new outlook ..
【Warranty】Buy with confidence! We offer the 365-Day warranty and lifetime support. If you have any question on use, ....
Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel
Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
