LGDing High Performance Big Bore Muffler Exhaust Silencer Pipe Head Assembly for Honda XR50 CRF50 Chinese 70cc 110cc 125cc SDG SSR Taotao Atomik Thumpstar Roketa Coolster Apollo Dirt Pit Bike Black
【Fitment】Fit Honda CRF50 XR50 CRF50F (not fit Honda other modle). And Their Copies 70cc-125cc Bikes From China, Such As Chinese Made....
【Specification】This is a complete one piece exhaust system from the head pipe to the tail section. This will make your bike breath with any engine....
【Size】Removable pipe guard 28mm head, 45mm eye to eye.
【Package Contents:】 1 x Exhaust Muffler， 1 x Exhaust head pipe， 1 x metal clip， 1 x Black rubber gasket， 2 x gasket， 1 x Screw kit.
【Note】Please check carefully the item pictures, model and size before purchasing. Or leave us messages for assistance if you are not sure about....
2X 2.0' Inch Stainless Steel Butt Joint Exhaust Band Clamp Sleeve for Exhaust Pipes, Mufflers and Catalytic Converters
HIGH QUALITY : The band is made of non-magnetic stainless steel for long durability and reliability, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block..
ADVANTAGE : It is very easy to solve the problem of replacing a section of the exhaust exhaust tubing without loosening multiple sections of exhaust tubing to install the flared connection, and it will make the connection very firm and very tight..
FUNCTION : Great solution for connecting 2 pipes of the same diameter! 360-degree clamping of the exhaust tubing to prevent exhaust leakage and noise.
INSTALL EASILY : You only need to link two tubing of the same size, then tie the strap clamp to it, and finally tighten the two screws..
WHAT YOU WILL GET : Two 2in Exhaust Bands, 12-month warranty, whatever the problem about this item you have, please contact us..
EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel
Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
USTPO Pit Bike Exhaust,Motorcycle Slip On Exhaust 28mm Muffler Silencer Pipe Assembly Kit For CRF50 XR50 70cc 110cc 125cc SSR Apollo Tao Tao SDG DB14 DB10 Coolster X-Pro Pit Dirt Bike Motocross Blue
Fitment：CRF50 XR50 SSR110 SSR125 Chinese 50cc 70cc 90cc 110cc 125cc Taotao ATK125A DB10 DB14 Apollo 110cc Baja 50cc 70cc SDG 107 TTR YCF IMR BSE DHZ Kayo Piranha Zongshen Rocketa Coolster Lifan Pister pro Pentora and many other Chinese brands motorcycle.（Not Fit Apollo RFZ 125）..
High performance: This is a complete exhaust modification kit, you don't need to buy other accessories.It is made of high -quality metal material and a perfect welding technology. Strong durability does not melt and not rust..
Material: The material of high temperature fire prevention materials for thermal insulation plate tape can effectively fire, flame retardant, high temperature resistance,Prevent injury from contact with hot exhaust pipes..
Size：Connection head Inside Diameter 28mm , 45mm eye to eye.Please check the size carefully before placing an order.
Package :1 x Exhaust Muffler，1 x Exhaust head pipe，1 x metal clip，1 x Black rubber gasket，2 x gasket，1 x Screw kit，1 set x Heat Shield Tape.
2" Exhaust Clamps Narrow Band Muffler Seal Clamp Exhaust Tip, Exhaust Resonator, Exhaust Manifold, Exhaust Flex Pipe, Project Catalytic Converter Repair Stainless Steel 2.0 inch 2PCS
【Application】Seal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects..
【Function】The narrow band clamp adds the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. Distributes the cla amping force evenly over the entire 360° to prevent leaks and control material distortion. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service..
【Easy to Install】Easy and less time consuming to install or remove with one bolt. This exhaust clamp is adjustable, has been tested for strength, and is reusable without damaging the pipes..
【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
3-Way Solenoid Valve 3/8\ with All Fittings (12-Volt)
These have an air inlet, an air outlet and an exhaust port..
Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 3-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.
SYKRSS 3 Stainless Steel Butt Joint Narrow Band Exhaust Seal Clamp with 1 Block
Application: Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold,....
Universal fitment, Joins 3.0" OD pipe to 3.0" ID pipe, There are 5 sizes for choose, it can meet your various needs. Please measure the size of your....
The narrow band clamp add the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. The I-shape block again enhances....
Easy to remove and install, the exhaust band seal clamp chose the design of flexible bolt and nut structure. can easily disassemble and install them.....
SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" narrow band clamp, you can feel free to contact us via....
BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit
▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Fits ALL 2015-2021 Subaru WRX | WRX STi Models ( Does NOT Work with Aftermarket Exhaust System or SPT Mid Pipe ).
100 % Brand New Condition, A Brand-New, Unused, Unopened, Undamaged Item in its Original Packaging (Where Packaging is Applicable)..
Package is Included with 1 X Pair of Subaru WRX STi Stainless Steel Double Wall Quad Tips Axle Back Exhaust ( Left & Right ), 2 X Pair of Hangers ( Left & Right ), 1 X Pair of Gasket ( Left & Right ) & 2 X Pair of Nut & Bolt ( Left & Right ).
Test Fitted Prior Shipment to Ensure Fitment Issue ( Guarantee to Fit ) - Does NOT Fit With Aftermarket Exhaust System or SPT Mid Pipe.
Free Shipping For US 48 States. Limited One Year Warranty.
Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)
1-1/8 inch width x 1-1/2" height Stock Square Port.
Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
