Best Exhaust System Tip Chrome

Q1-TECH, Universal 4' Burnt Tip JDM N1 Style Muffler Hi Flow Stainless Steel Weld-On 2.5' Inlet , Muffler , Removable Silencer Pre-attached , Deep and Smooth tone

  • ✅Fitment: Universal fit for all 2.5 inch exhaust pipe, as long as your exhaust pipe is 2.5 inch ,it would fit . and easy to install, bolts on in minutes. You can choose Butt joint, Lap joint, or muffler seal clamp ,U bolt clamp..
  • ✅Feature: Polished stainless steel, The muffler is 2.5 inch inlet, 4 inch outlet, 19 inch length just need to measure the inlet of your car before purchase..
  • ✅Straight-through muffler design reduces back pressure while absorbing sound waves Made from the stainless steel for long-lasting durability..
  • ✅Function: A muffler is used near the end of the exhaust system on a vehicle, work on the principle of destructive interference and absorption. The walls of the muffler are made of two layers of stainless steel, which help reduce vibration and absorb sound..
  • ✅Package includes: 1 x Exhaust Muffler, Includes removable silencer OUTLET TIP 4", INLET TIP 2.5".
Check Stock

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

  • Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
  • Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
  • Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
  • Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
  • Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..
Check Stock

Jinsanity Performance 2.5″x3″x12″ Inch Universal Exhaust Tip, Stainless Steel Diesel Exhaust Tailpipe Tip, Bolt/Clamp-on Design

  • 【Design】Polished stainless steel finish, Easy bolt on Installation, no weld or drill needed..
  • 【Dimension】2 1/2 inch inlet, 2.5 inch inside diameter inlet, 3 inch outside diameter outlet, 12 inch overall length..
  • 【Material & Protection】High quality, durable chrome stainless steel exhaust tip and polished. Avoid rusting and deformation from rain, sun and snow.
  • 【Installation】Universal Exhaust, mirror polished surface treatment and Rolled Edge – 20 Degree slant cut, laser engraving JINSANITY PERFORMANCE on the side of the outlet pipe..
  • 【2 Year Warranty】24 months warranty: Feel free to contact our customer service if you have any problem with our product..
Check Stock

Dual Exhaust Tips Muffler Tip Chrome Exhaust Tip Heart Shaped Car Muffler Double Tube Universal Stainless Steel Car Exhaust Muffler,For Fitment On Most Cars Sedans Suitable For 48mm-60mm Exhaust Tip

  • ☻[High-quality material] We use the best 304 stainless steel to make the heart-shaped double-tube Exhaust tip,and the exterior adopts a sleek all-inclusive edge design.They have the advantages of high temperature resistance,resistance to rust,strong corrosion resistance and long service life.They can protect your original exhaust for a long time and completely cover and protect your original exhaust tailpipe..
  • ☻[Production process] Exhaust nozzle surface polishing+color electroplating process design treatment, the inner cylinder of the exhaust nozzle is coated with special high-temperature coating, which has super corrosion resistance and exquisite craftsmanship, which can help you car The exhaust port has a smooth appearance. The exhaust tail pipe is suitable for pipes with a diameter of 48mm-60mm. Please measure the diameter of the pipe before purchasing..
  • ☻[Easy to install/no need to drill] When installing the tip of the exhaust pipe,clean the surface of the old tip of the vehicle,and then only use a wrench to fix the 3 screws to the appropriate position of the exhaust pipe,and then firmly fix it after installation Fix it to the exhaust pipe of the original....
Check Stock

HIAORS 28mm Motorcycle Exhaust Muffler for SDG SSR Coolster Lifan CRF50 XR50 KLX Thumpstar TTR YCF 50cc 70cc 90cc 110cc 125cc Chinese Pit Trail Dirt Bike Parts Blue

  • See fitment guide image for additional Machines this item fits. Fully tunable exhaust system allows the user to change from a race exhaust (46mm Race Tip) to a forest friendly silencer (Quiet Core Insert) with just three bolts..
  • Engineered to improve torque and acceleration with an increase of up to 4 horsepower on some machines..
  • Lightweight design saves up to 3.5 lbs. over the stock exhaust..
  • Included 46mm Race Tip for closed course competition..
  • Includes USFA approved Quiet Core spark arrestor insert that brings sound levels down below 96db..
Check Stock

SYKRSS Exhaust Tip Universal 2.5 Inlet 3 Outlet 12 Length Bolt Clamp On Design Stainless Steel Polished Diesel Exhaust Tail Pipe Tip

  • 2.5 inch inside diameter inlet, 3 inch outside diameter outlet, 12 inch overall length. NOTE : Universal exhaust tip fit 2.5" outside diameter pipe,....
  • Made of 304 stainless steel exhaust tip to avoid corrosion and deformation of the existing tailpipe, to prevent the heat back. black the lacquer that....
  • Clamp on design, easy to install, no drill needed. Makes it possible to remove the exhaust tip for cleaning. If you think it isn’t tight enough,....
  • Diesel exhaust tip, rolled edge and angled cut design. Perfectly decorates your vehicle. The unique styling adds a high-performance feel and look to....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the exhaust tail pipe tip, you can feel free to contact us via....
Check Stock

JWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories

  • Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
  • Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
  • Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
  • Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

FOMIUZY 2.75' Inlet Black Chrome Pipe Exhaust Muffler Tip For Truck Tailpipe 3.5' Outlet 8.6' Overall Length Compatible With Toyota Tacoma 2005-2023 Replaces PT932-35180-02 PT9323518002

  • 【Direct Replacement】: Over time, the tail pipe will be bitten by dust and rain, gradually corroded, rusted and deformed, which will greatly affect the appearance of your vehicle. It is recommended that you buy this exhaust tip to solve the problem. The exhaust tip meets or exceeds the oem standard, and has been tested by the factory to perfectly match the original car and can be installed directly.
  • 【High quality】: Made of reinforced high-quality materials, it is abrasion resistant, corrosion resistant, high temperature resistant and has a long service life. The tip extends the exhaust by about 2 inches, with a beveled, sharp black tip opening that makes the exhaust feel more energetic while driving. Replaced with a new exhaust tip for better protection of the exhaust pipe, giving your vehicle a more muscular custom look, providing you with long-term stability and excellent performance.
  • 【Fits For】: 2005-2023 Toyota Tacoma(Please Check Exhaust Pipe Size. 2.75" Inlet 3.5" Outlet 8.6" Overall Length).
  • 【Buy With Confidence】: Once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems.
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock

COPART Motorcycle Exhaust Pipe System Muffler Pipe with Baffles For Yamaha V Star 1100 XVS1100 1999-2009 (B, Black)

  • Material:Stainless Steel, high quality and great fitment,corrosion resistant, correct connector no cutting or splicing,professional installation recommended..
  • Fitment: Exhaust pipe fit for Yamaha V Star 1100 XVS1100 XVS1100A XVS1100AT XVS1100AW Custom and Classic all years.Make the exhaust smoother, provide you with a good driving experience.Extend the life of the exhaust pipe muffler..
  • Color: Chrome and black,3 different exhaust pipe to choose. Outer pipe diameter: 5.3 cm/2.08 in, inner pipe diameter 2.6cm/1.02 in. Enhance your motorcycle outlooks..
  • Package Includes: 1 * Exhaust System,Installation Instruction NOT Included. Easy install and durable use. Dear customer, if you receive item damaged, defective,not as describe or wrong one, please email us pictures within 72 hours, we will do our best to help you to solve the problem..
  • COPART is an excellent international motorcycle parts factory. Through the internet platform, we have already sold our products to Europe/North America/Asia/Middle East/Russia/Australia and have factories in many countries, so you have any After-sales problems, we can provide you with the perfect service plan.
Check Stock