【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
Cushioned for comfort and non-slip security.
【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....
After installed this product, the pressure blowing out of your exhaust will make your vehicle sounds like a turbo vehicle with the turbo system or blow off valve..
Made of high quality aluminum, light weight and durable..
Easy to install on the car’s tailpipe..
Installation: 1. Loosen the bolt on the Turbo Sound Whistle. 2. Insert the the Turbo Sound Whistle into the tailpipe. 3. Tighten the bolt so as not to fall off while driving..
Notes: 1. Please make sure the tailpipe is big and long enough to contain the Turbo Sound Whistle. 2. Professional installation is highly recommended, products damaged through self-installation will not be refunded. 3. Please check and re-tighten the bolt regularly..
AUTOSAVER88 4 Inch Inlet Exhaust Tip, 4' Inlet 6' Outlet 15' Long Chrome Polished Finish Stainless Steel Universal Exhaust Tail Tip for 4' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt On, Silver
Dimension: standard 4″ x 6″ x 15″(inlet, outlet and overall length).
ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound.
meanwhile, the chrome polished finished offer your car with a a new & sporty appeal.
Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
AUTOSAVER88 3 Inch Inlet Black Exhaust Tip, 3' Inlet 4' Outlet 12' Overall Length Stainless Exhaust Tips Powder Coated Finish Tailpipe, Universal Fit for 3' O.D. Tailpipe, Rolled Edge, Bolt/ Clamp On
Dimension: standard 3″ x 4″ x 12″(inlet, outlet, and overall length).
ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the Black Powder Coated Finish offer your car with a elegant and mysteriou appeal.
Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Dimension: standard 3″ x 4.5″ x 9″ (inlet, outlet and overall length).
ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel， our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
meanwhile, the chrome-plated finish would give your car a new & sporty appeal.
Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
8MILELAKE Exhaust Tail Pipe Cutter, 3/4 Inch to 3 Inch Universal Tube Cutting Pliers Carbon Steel Chain Exhaust Cut Off Tool 15 Blades for cutting tailpipes and exhaust pipes both on and off the car
【APPLICATION】The exhaust tail pipe cutter is designed for cutting tailpipes and exhaust pipes both on and off vehicle use. Use tool to cut copper, PVC, iron pipe, etc with diameters of 3/4 to 3 inches (19-76mm).
【HIGH QUALITY】The chain muffler pipe cutter is made of high quality carbon steel, the surface has been anti-rust treatment and strict testing methods, strong , sturdy and durable, not easy to damage.The ergonomically non-slip handle of the exhaust and tailpipe tube cut off tool is made of plastic and steel and is comfortable while cutting..
【HIGH PERFORMANCE】Universal carbon steel tubing cutter features with 15 blades to cut pipe quickly and effectively. Each roller has a cutting wheel that provides smooth tracking, so only a quarter turn is needed for complete cut..
【PERFECT DESIGN】The exhaust tailpipe tube cutting Pliers works well in areas that are hard to reach, pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. Lubricating the cutting wheel of the exhaust cutter before use will make the cutting operation smoother and prolong the service life of the item..
【SERVICE GUARANTEE】High quality products and services have always been our purpose. If you encounter any problems in the proces....
AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 9' Overall Length Chrome-Plated Stainless Steel Exhaust Tail Tip for 2.5' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt-On
Dimension: standard 2.5″ x 4″ x 9″(inlet, outlet, and overall length).
universal fits for vehicles with 2.5-inch outside diameter exhaust tail pipe(please make sure the outside diameter of your car tailpipe is 2.5″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated finish offers your car with a bright shine and nice appeal.
Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating
Dimension: 1.75-2.25 inch adjustable inlet diameter.
universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
effectively anti-corrosive, avoid rust and deformation for enhanced durability.
Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
