Best Expansion Teflon Sealing Belt

Wiseco PK1514 45.00 mm 2-Stroke Motorcycle Piston Kit with Top-End Gasket Kit, Pink

  • Fits: for 1998-2004 Honda Foreman 450 4x4 (All Models).
  • Kit Includes: Cylinder,Piston,Rings,Wrist Pin,Circlips,Gaskets,Spark plug.
  • Made from hypereutectic alloy for extra strength and reduced expansion..
  • MOS2(Teflon/Molybdenum) coated skirts perform at the highest standards, reducing friction and heat for added power and longevity..
  • Anodized piston dome for increased protection against excessive heat..
Check Stock

Impulse Bag Heat Sealer for Plastic Bags 8 inch 5mm Sealing, Heavy Duty Iron Housing, Manual Heat Sealing Machine for Mylar Poly Bags, with 6 Repair Kits(Included 2 Cutter Lines)

  • 1.The heating element in the Impulse Heat Sealer is not constantly heated. The light only turns on and the sealer is activated when the handle is pressed down! The light will turn off once sealing is completed. Voltage: 110V. Sealing width: 5mm. Max heat seal length: 200mm. Max heat seal thickness: 0.8mm. With 6 piece teflon tape wires replacement spare parts, including 4 flat wires(Suitable for sealing) and 2 round wires(Suitable for cutting off the excess part of the plastic bag after sealing).
  • 2.Heat sealer machine shell is iron material, Built in precision circuit controls. 8 levels adjustable timer, For most applications, Using a heat setting of 3-5 is sufficient, and the heating time is adjusted according to the thickness of the sealing material. Silicone rubber sheet is used at the hand pressing part, which increases the magnetic permeability and effectively reduces iron loss and magnetic aging, Has higher heat resistance, longer service life, better sealing effect..
  • 3. No warmup or cooldown time is needed, safe, and simple to use. Place the bag on the original seal, Keep the handle pressed down for 2-3.5 seconds to get seals optimal results. The sealing is completed and the power is automatically turned off (Continue to press for 2s after t....
Check Stock

SPI, 09-71209710110C09503, 2 Pistons, Bearings & Gasket Kit 1986-1999 Polaris 488cc Trail Models Standard Bore 72mm

  • Fits: for 1998-2004 Honda Foreman 450 4x4 (All Models).
  • Kit Includes: Cylinder,Piston,Rings,Wrist Pin,Circlips,Gaskets,Spark plug.
  • Made from hypereutectic alloy for extra strength and reduced expansion..
  • MOS2(Teflon/Molybdenum) coated skirts perform at the highest standards, reducing friction and heat for added power and longevity..
  • Anodized piston dome for increased protection against excessive heat..
Check Stock

Skylety 10 Rolls Thread Seal Tapes, PTFE Pipe Sealant Tape (10 Rolls, White, 1/2 by 520 Inches and 3/4 by 260 Inches)

  • Package includes: we provide different choices, you can choose the quality, size and color according to your actual needs, they can meet your different needs and also can be applied for a long time.
  • Good quality: sealant tape is made of teflon with good density, 4 times heavier than standard tapes.
  • Teflon tapes will not harden or crack anytime.
  • They have the good characteristics of sealing, corrosion resistance, anti-aging.
  • Easy to use: simply wrap the tape around the threaded male end of the pipe or connector and screw it in.
  • Less stickiness on the fingers and easy to remove.
  • Widely apply: thread sealant tape is suitable for most kinds of soft water pipes, creating airtight seals between threaded pipes and fittings.
  • Working for both air and water, it is designed for home and piping applications.
  • Standard grade: standard quality for home, commercial and industrial uses, good for gas, drinking water pipes and garden hose faucets.
Check Stock

PTFE Plumbers Tape, VCELINK Teflon Water Sealant Thread Tape, 520\ Length 1/2\ Width, Industrial Plumbing Tape Stop Leaks for Shower Heads and Pipe Threads (2 Rolls)

  • VCELINK Teflon Tapes can be used to connect threaded pipes. A good solution for enhancing the tightness of pipes..
  • WIDELY APPLICABLE: Plumbing tape is designed for home and threaded pipe applications. Suitable for the most threaded-installing piping devices, including washing machine pipes, faucets, shower nozzles, etc..
  • GOOD QUALITY: the pipe sealant tape has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • EASY TO USE: Simply wrap the waterproof Teflon tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • PACKAGE AND AFTER-SALES: 2 Rolls 520" length by 1/2" width PTFE pipe sealant tape. 18 months warranty for quality problem..
Check Stock

Impulse Heat Sealer for Plastic Bags, 16 Inch Poly Bag Heat Sealer, Iron Shell, Plastic Mylar Bag Sealer, Manual Heat Sealer Machine, 3mm Sealing, 4 Free Replacements Kit (2 Cutting Lines Included)

  • 【Impulse Sealer Specification】--- Voltage: 110V. Sealing width: 3mm. Max hot seal length: 16" (400mm). Max hot seal thickness: 0.8mm. With 4 piece free teflon tape wires replacement spare parts, including 2 flat wires(suitable for sealing) and 2 round wires(suitable for sealing with cutting, suitable for cutting off the excess part of the plastic bag after sealing).
  • 【Plastic Bag Sealer Design】--- This heat sealer machine shell is iron material, than normal plastic sealer machine more durable. Built in precision circuit controls and fuse. 8 levels adjustable timer, suitable for bags of different thicknesses and materials.
  • 【Instructions】--- Manual mylar bag sealer machine easy&safe to use: The handle is pressed down→LED indicator ON, sealer is activated→melts one layer of plastic to another creating a strong permanent seal→about 1-3.5s LED indicator OFF the power will be cut off automatically after and complete sealing.
  • 【Applicable】--- This impulse bag sealer used to encapsulate all kinds of candies, food, general goods, stationery and etc. Ideal for household, supermarkets, kitchen, retail, produce, grocery stores, etc. Perfect for mylar poly bags, foil bags, PE/PP bags, cookie bags nuts coffee beans/powder bags and all other heat s....
Check Stock

CGOLDENWALL Emergency Shower Safety Shower Station Horizontal Mount Drench Head, Can Match with Eye Wash Station, 304 Stainless Steel, NPT thread

  • 【EMERGENCY SHOWER】Horizontally wall-mounted, made of SS304 stainless steel, with excellent corrosion resistance and long service life.
  • 【EASY TO INSTALL】Pull down the shower lever when in use, after showering, push the lever up. Large shower holes ensure that the flushing flow can meet the requirements..
  • 【TECHNICAL PARAMETERS】①Production standard: ANSI Z358.1-2014.
  • ⑤Inlet size: 1 inch internal thread change.
  • 【INSTALLATION HEIGHT】The height of the shower nozzle should be between 2083~2438mm, according to ANSIZ358.1-2014. The diameter of the shower nozzle is 260mm.
  • 【INTERFACE SEALING】When installing, please wrap the interface with Teflon Tape in the direction of the thread. If it leaks, it is usually because the Teflon Tape is not wrapped thick/tight enough, or the wrapping direction is wrong..
Check Stock

Waterway 2 in. TruSeal Diverter 3-Way Valve 600-7100-CPVC

  • Trim line ball valve is designed for maximum flow efficiencies with pressure ratings up to 50-psi rating.
  • Made from non-corrosive, durable ABS material.
  • Feature 2-way ball valve with 1-1/2-inch MIP by 1-1/2-inch FIP connection and dial handle for easy flow regulation.
  • Also feature Teflon seats for dependable sealing and a union end connector that accurately aligns ball.
  • Provides simple disassembly of piping connections and visual indication of valve setting.
Check Stock

LSHUZIYU 7-1/4”(185MM)-40T, Super Thin Kerf 1/16\(1.6MM), Arbor 5/8\

  • ①:Diameter 7-1/4" (185mm), 40T, ATB and Super Thin Kerf is 1/16" (1.6mm), Max Speed RPM 8500.
  • ②:Arbor 5/8" with diamond washer. Please twist out removal, not use hammrer knock out..
  • ③:Laser cut Supper Thin blade body, anti-vibration and expansion slots reduce noise and vibration during operation.
  • ④:High hardness Carbide is design to cut Hard Wood, Plywood, Laminate, MDF, HDF also OK for soft wood.
  • ⑤:Teflon surface coating make the blade anti-sticker for you Very Sharp and Clear cut.
Check Stock

LSHUZIYU 7-1/4”(185MM)-24T, Super Thin Kerf 1/16\(1.6MM), Arbor 5/8\

  • ①:Diameter 7-1/4" (185mm), 24T, ATB and Super Thin Kerf is 1/16" (1.6mm), Max Speed RPM 8500.
  • ②:Arbor 5/8" with diamond washer. Please twist out removal, not use hammrer knock out..
  • ③:Laser cut Supper Thin blade body, anti-vibration and expansion slots reduce noise and vibration during operation.
  • ④:High hardness Carbide is design to cut Hard Wood, Plywood, Laminate, MDF, HDF also OK for soft wood.
  • ⑤:Teflon surface coating make the blade anti-sticker for you Very Sharp and Clear cut.
Check Stock