Best External Rotor Motor

Mini Centrifuge Machine 4000rpm 7000rpm Lab Benchtop Centrifuge,2 Rotors for 0.2/0.5/1.5/2ml Micro tubex12 and 0.2ml 8/12 PCR stripex4

  • JOANLAB LC series is is perfect benchtop microcentrifuge for your lab to do quick spin downs.Speed can be switched between 4000RPM and 7000RPM , Max. RCF of 1080 x g/3286xg. Includes an 12-position 1.5/2 mL tube rotor as well as a 4-position 12-strip PCR tube rotor that can accommodate 48 individual PCR tubes or 0.2mL strip tubes. With the included adapters, 0.2 mL and 0.5 mL strip tubes can also be accommodated in the 12 position tube rotor, further increasing its versatility..
  • ENCLOSED DESIGH reduces the risk of liquid splashing into the equipment. Our this lab mini centrifuge also has a quick release design in which the rotors can be removed and installed without the use of any tools..
  • SAFETY PROTECTION-low voltage power input, sturdy lid, and rotor's safety buckle design. The rotor will stop when lid is opened while in rotation, protecting the operator from being injured by the high-speed spinning rotors..
  • With a quiet motor, and rubber base that absorbs vibrations,JOANLAB LC-4/7S mini centrifuge manchine keeps operational noise to a minimum , less than 47dB and reduces disruptions in the laboratory. And it takes simple operation to a new level. Once the device is powered on, simply place your sample in the centrifuge, close the lid, and it will beg....
Check Stock

Bevve Deep Well Submersible Pump Submersible Solar Water Pump for Deep Well Solar 3SPST2.3/140-D72/1300 Industrial, Farmland and Home Use

  • The efficiency is improved 25% by the permanent magnetism, brushless dc non-sensor motor..
  • Adopt double plastic package for rotor and stator,motor insulation 300M,the motor was much improved..
  • Advanced controller with MPPT technology for maximum solar power..
  • 100% copper wire, cold-rolled silicon steel sheet..
  • 304 stainless steel shaft , motor body, screw..
Check Stock

Carbon Motor Brushes, 0.3×0.7× 0.71 Inch 044 Electric Motor Carbon Brush Replacement 20 Pcs

  • PERFECT REPLACEMENT---These carbon motor brushes are perfect replacement for the broken one, 20 pcs per set, practical and economic.
  • STABLE PERFORMANCE---These carbon motor brushes are conductive and of good thermal conductivity, durable in using, stable performance will not dispoint you.
  • SUITABLE FOR---These carbon motor brushes are suitable for an electric motor, the coils of the rotor must be connected to complete an electrical circuit.
  • CARBON ALLOY MATERIAL---These carbon motor brushes are made of high quality of carbon and alloy, with superior performance, durable in using.
  • SUPERIOR AFTER SALE SUPPORT---Please feel free to contact us for your any problems about our product. It is our pleasure to service you. Do not doubt your importance to us.
Check Stock

A2807 Brushless Motor 1500KV RC Electric Motors 6S Drone Motor for RC Plane FPV Airplane Quadcopter & Fixed Wing

  • Precision balanced rotor, 52H level magnet and 14 pole 12 slot high torque motor design, more efficiency, smoothly and stable.
  • Equipped with CNC 6061-T6 aluminum bell, high RPM imported bearing and high temperature resistant copper wire winding, more strong, durable and long life.
  • The shaft diameter of electric motor is 4mm, motor mount is 19*19mm(M2*4), which is suitable for 7 inch propeller.
  • A2807 brushless motor is characterized by support 4S, which is widely used for FPV, drone, quadcopter, airplane, RC plane, fixed-wing models and so on.
  • Motor size is 1.3 x 0.79in (33.6 x 20mm), cable length 18#AWG 220mm. Package include 4 x A2807 brushless motor and a set of accessories.
Check Stock

VEVOR Centrifuge, 7000RPM Fixed Speed Lab Centrifuge Machine, Max. 3286xg RCF Scientific Mini Centrifuge, with 2 in 1 Rotor, fits 0.2/0.5/1.5/2mL Tubes with 0.2/0.5mL Adapters, for Liquid Samples

  • 7000RPM Fixed Speed: Rotation speed: 7000RPM fixed speed.
  • maximum relative centrifugal force: 3286xg. Equipped with an effective motor that delivers a powerful rotating action, this centrifuge spins at a fixed speed of 7000RPM while its maximum RCF can reach up to 3286xg..
  • Large Rotor Capacity: Capacity: 0.2/0.5/1.5/2mL x 12.
  • 0.2mL x 8 x 4. Comes with 12 0.2mL adapters and 12 0.5mL adapters. The 2 in 1 multifunctional rotor in this lab centrifuge machine can house centrifuge tubes of different sizes: 0.2mL, 0.5mL, 1.5mL, and 2mL, meeting most of the experimental needs..
  • Smooth & Stable Operation: This electric centrifuge is equipped with an efficient motor, achieving a smooth operation with low noise (003c47dB(A)) and low vibration. Plus, our mini centrifuge machine is designed with four non-slip foot pads, stand firmly in place during the operation..
  • Considerate & Secure Design: Automatic lid lock keeps the lid locked during the operation and releases until the machine stops.
  • the transparent lid makes it easy for observation.
  • and stable foot pads design, not easy to slip. Constructed with a high-quality PP plastic shell, our scientific mini centrifuge features high strength and durability..
  • Diverse Application: Our electric lab centrifuge machine separa....
Check Stock

Tarot TL68P07 6S 380KV 4108 Multi Rotor Disc Brushless Motor for DIY Quadcopter FPV Drone (4 Pcs)

  • 6S4108 Brushless Motor Installation Specifications: 27.7MM Equilateral Triangle.
  • Propeller Installation Specifications: The Main Hole Diameter 4mm, 3mm Diameter.
  • 6S4108/380KV Brushless Motor 93G × 1 M3 × 6MM Cup Head Screws × 3 3 × 8MM Round Head Screws × 2 Metal Rotor Mounting Piece 2.5G × 1.
Check Stock

Electronic Longboard Hub Motor Kit Skateboard Brushless Motor Wheel with Truck Electric Board Dual Motor Drive Remote Controller Dual Drive

  • Material: The wheel hub motor that drives the skateboard is made of PU,aluminum and iron materials,with a very long service life.
  • Strong Power: The wheel hub motor drive kit adopts an outer rotor brushless motor,which is faster and not easy to heat up.
  • Shock-absorbing Wheels: Drive skateboard wheel hub motor kit PU wheels have good elasticity and shock absorption.
  • Reliable: Single-drive skateboard wheel hub motor has stable characteristics,sturdiness and durability.
  • Compatibility: Electric skateboard wheel engine remote control is suitable for all skateboards with a board length less than 910mm.
Check Stock

RCRunning 3650 5900KV 3.175mm Shaft Waterproof Brushless Motor for 1/10 1:10 RC Car

  • High Torque4 pole 12 slots high-torque motor design, 3.175mm shaft diameter.
  • High QualityPrecision balanced rotor, smoothness for best reliability and maximum RPM.
  • WaterproofWaterproof, precision engineered for maximum energy conversion. Perfect after-sales service, manufacturer directly supply products..
  • NoteA wrong tooth ratio can cause the motor to overheat. The motor temperature should be lower than 212 during the operation. Temperatures above 212 will weaken the magnet and may partly melt the coils and eventually damage the ESC (because of strong current)!!! To avoid potential risks such as ESC/motor damage or malfunction caused by overheat, start with a very small pinion first and check the ESC & motor temperatures regularly throughout the run. The only way to prevent overheating..
Check Stock

GoolRC 550 12T Brushed Motor for 1/10 HSP HPI WLtoys Kyosho Traxxas RC Off-Road Car

  • Virtually maintenance-free operation and long-lasting performance..
  • Integrated cooling fan pulls cool air through the motor to keep temperatures down.Heat-resistance running motors allow faster speeds, longer runtime, and extending motor life..
  • Precision balanced rotor, smoothness for best reliability and maximum RPM..
  • Suitable for HSP HPI WLtoys Kyosho Traxxas brushed 1/10 RC Off-road car..
Check Stock

100 Carbon Brushes, 20PCs 5×8×16 mm Electric Motor Drill Carbon Brush Replacement with Great Conductivity, Carbon Brush Set

  • These carbon motor brushes are suitable for an electric motor or generator to function, the coils of the rotor must be connected to complete an electrical circuit.
  • These carbon motor brushes are conductive and of good thermal conductivity, durable in using, stable performance will not dispoint you.
  • These carbon motor brushes are perfect replacement for the broken one, 20 pcs per set, convenient to replace the carbon brush.
  • These carbon motor brushes are made of high quality of carbon and alloy, with superior performance, durable in using.
  • Please feel free to contact us for your any problems about our product. It is our pleasure to service you. Do not doubt your importance to us.
Check Stock