PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..
uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit
Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Microphone Stand - Universal Mic Mount with Heavy Compact Base, Height Adjustable (2.8’ - 5’ ft.) - PMKS5
HEIGHT ADJUSTABLE: Pyle compact base microphone stand smoothly quick and easy, raise or lower height adjustment from 33.5" inch to 60.24'' inches high. Also, Pyle used USA standard 5/8 x 27 external thread size.
RELIABLE STURDY BASE: It is solid die-cast and base for about 235mm in diameter. Pyle mic stand will provide stability and precise balance to avoid it from falling. And 9.92 lbs. counterweight for a stable microphone placement.
CONVENIENT DESIGN: This is an ideal mic stand for the musician that’s always on the go. It’s ultra-light pack up with sleek black finish is ultra-light for easy transport. It is also built compactly to be both durable for long term use.
STUDIO AND CONCERT USE: Perfect mic holder positioning and optimal pickup for the studio and concert performances. The Pyle PMKS5 is a class at its own.
Orion Motor Tech 131pcs Metric Thread Repair Kit, HSS Drill Helicoil Kit mm, M5 M6 M8 M10 M12
This Thread Repair kit is Used to Repair or Replace Damaged or Stripped Internal Screw Threads.Suitable for engine repair and other automotive applications..
Sae&Metric: The kit Has Altogether 261 Pieces including insert installations, wire thread inserts, twist drill bits, thread taps, lug breaking tools that allow you to have a smooth repairing experience.All Made According to Professional Standard..
All tools were packed in a convenient carrying case, easy and fast in collecting and placing the tools. Each accessory has its place, inserts will even be packaged in separate boxes..
Creates stronger internal thread in soft materials.Also come with detailed instructions.Note:please read the listing carefully,this kit doesn't include the adjustable die wrench,if you want a die wrench you can choice our sae type:B09BMPJDB7..
Don't bother to spend a lot of money on a variety of models,all you need is our kit.Once for all..
Neiko 00916A 45 Piece SAE Tap & Die Set, SAE Tap and Die Set, Tap Set, Rethreading Kit, Pro-Grade Large Tap and Die Set, Titanium Threading Tools, Thread Chaser Set, Tap & Die Set Standard
HEAVY DUTY TAP & DIE SET: Titanium cutting edges hold sharpness up to 20x longer than steel, making this a perfect SAE tap and die set for any project, big or small..
VERSITILE: Create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper, and stainless steel with this tap and die kit..
DURABLE STORAGE CASE: This large tap and die set standard is fully equipped in a heavy-duty molded case for easy identification, storage, and portability for all your jobs on the go..
PREMIUM MATERIAL: Our SAE thread chaser set is made of a professional grade steel, highly durable and built to last for multiple uses. This tap set is perfect car repairs, DIY projects, and much more..
COMPLETE SET INCLUDE: This rethreading kit comes with the most popular SAE taps & dies. T-handle tap wrenches, adjustable die wrench, screwdriver, and thread pitch gauge..
ORION MOTOR TECH 86pc Tap and Hex Die Set in SAE and Metric | Titanium Coated Steel Tap Set and Die Tool Set for Homeowners Mechanics Metric Standard Internal External Threading(Iron Case)
ALL-IN-ONE TAP & DIE SET: This 86-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the most needed standard and metric sizes, from #4 (14/125") to 5/8 inch and from M3 to M16.
USER-FRIENDLY DESIGN: This tap and die set is engineered to tight tolerances to meet professional needs.
the tap ends are 1/5 to 2/5 inch long for easy use with the provided standard and metric wrenches.
PREMIUM DURABILITY: This tool set for homeowners, craftsmen, and mechanics is made of high-carbon chromium bearing steel.
titanium plating provides even greater strength, durability, and longevity so you can tackle any job with confidence.
ADDITIONAL TOOLS: In addition to the 78 taps and dies, this tool set includes both adjustable and T-handle wrenches, a 1/8" flathead screwdriver, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more!.
BLOW-MOLDED CASE: The metal storage case stores and organizes the SAE and metric taps and dies, providing easy organization and portability wherever you need them.
Spigotmaster ~ SM01.125 Vacuum Breaker Adapter ~ Converts an Arrowhead PK1360 Anti-Siphon Valve Into a Straight Through Connection
Converts Arrowhead, NIBCO & Other Anti-Siphon Hose Bibs Into A Normal Garden Hose Connection That Won't leak! We Make 4 Models to Fit Most Spigots - MAKE SURE YOU MEASURE BEFORE ORDERING!.
SM01 ~ Works on Arrowhead Spigots When You Can Remove the Entire Vacuum Breaker. External Threads on Spigot are 1.05" in Diameter, Internal Threads on Adapter are 1.0" in Diameter.
SM01.125 ~ Works on Some Arrowhead Spigots Directly or Bottom Half of Vacuum Breakers with Part Number ABP 486 BFP. WILL NOT FIT ABP 59 BFP!! External Thread Diameter of Spigot Measures 1.17". Internal Diameter of Adapter is 1.125".
SM-XL ~ For Watts & Cambridge Brass Spigots Widely Used in Canada as well as NIBCO 63CLVB/763CLVB with VBS-12-ASSE Adapters External Thread Diameter of Spigot Measures 1.22". Internal Diameter of Adapter is 1.17".
SM-XXL ~ Fits Watts NF8 EDP #0061854, NIBCO & Other Spigots Where the External Thread Diameter of Spigot Measures 1.3". Internal Diameter of Adapter is 1.25".
