Stand Steady Clamp-On Keyboard Tray with Adjustable Tilt | Ergonomic Under Desk Keyboard Shelf | Damage-Free Easy Installation- No Drilling | 20-inch Tray 27-inch Including Clamps
WON’T DAMAGE YOUR DESK: With its padded clamp-on design, this ergonomic keyboard tray does not require you to drill holes or otherwise modify your....
ERGONOMIC COMFORT: Featuring both negative and positive tilt, the Stand Steady Tilting Keyboard Tray adjusts to your ideal ergonomic angle and easily....
LIGHTWEIGHT & SLEEK DESIGN: With its all-black frame, this clamp-on keyboard tray is sure to add a high-end feel to any home or office - while....
QUICK & EASY INSTALLATION: This keyboard shelf clamps to the front edge of your desk with padded, non-slip thumb screw clamps. No extra tools needed.
FITS MOST DESKS: This compact keyboard tray features a 20-inch wide tray surface and will fit desktops that are wider than 28 inches and .5” –....
Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA
If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly..
The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart..
Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place..
Unlike other available spring clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pie....
Tabazy CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit,
Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width &....
Jorgensen 24 One Hand Clamp/Spreader - 2-pack Medium Duty E-Z Hold Bar Clamps Set
Reach: 3-1/3” from the edge of the bar to center-line of the screw.
Bar: 1/4”*3/4” plated, round-edge, high-carbon steel..
E-Z HOLD II Design- These versatile clamps can be easily converted into spreader clamps and allow two clamps to join to make a clamp with more than double the opening capacity of a single clamp..
One-Handed Clamp- These bar clamps combine the speed and ease of single-handed use, with 3-1/3 inch reach, and are furnished with soft and durable plastic pads. As a “standard,” quick-acting, one-handed clamp, the patented, innovative sliding head maintains substantially higher clamping forces..
Features- The contoured comfort grip and quick-release lever make it simple to get a firm grip in a flash. The unique in-line advancing handle provides comfort and ease of use, permitting more significant travel per squeeze. These special bar clamps are some of our easiest-to-use clamps and are ideal for hobby, craft, and model projects..
Glarks 120Pcs 304 Stainless Steel Hose Clamps Assortment Kit Adjustable 8-44mm Range Worm Gear Hose Clamps Fuel Line Clamp for Water Pipe Plumbing Automotive and Mechanical Application
★【Wide Hose Clamp Size:】 In this hose clamps set, it include 120pcs 8-44mm range clamps which are 25pcs 8-12mm, 20pcs 10-16mm, 20pcs 13-19mm, 15pcs 16-25mm, 10pcs 19-29mm, 10pcs 18-32mm, 10pcs 21-38mm, 10pcs 21-44mm total 100pcs packed in a plastic box, easy to storage and carry..
★【Durable Quality:】 All the hose clamps including the band, housing and screw are made of 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
★【Adjustable Style:】 All the hose clamps with screws, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted..
★【Save Time and Money:】These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage, saving your time and money on costly repairs the pipe..
★【Function and Use:】These clamps are locking secure and tight, widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply for automotive, industrial, marine, shield, househ....
uxcell Double Wire Spring Hose Clamp 6mm Inner Dia Fit 6.5-7.2mm OD Hose Fuel Line Silicone Tube Spring Clips Zinc Plated 20Pcs
☆【PRODUCT INFORMATION】--- In this set, we prepared 11 different sizes hose clamps for you, hose diameters includes: 7/8/9/10/11/12/13/14/15/16/17mm, 5-pcs each size, 55pcs in total, package in durable transparent plastic box, widely used them on a number of hoses that it can reducing the chances of a fuel or water pipe leak..
☆【DURABLE AND STURDY】--- These spring hose clamps are made of high quality 65mn spring steel, which is strong and sturdy, corrosion resistance in a humid environment, it can be stored for a long time, have highly sealed, the surface of clamps are polishing that can effective prevent pipe damage.
☆【WIDE APPLICATIONS】--- Spring hose clamps are used in a wide range of applications, suitable for hose/gas pipe/air hose/water pipe/automotive fuel line/silicone hose, connection fastening, etc..
☆【EASY TO USE】--- You can easily move these on the tubes with your fingers, using pliers to open the surface and easily lower it on the tube, it can be reused, come with durable transparent box enough to accommodate all clamps in case of lost..
☆【CUSTOMER SERVICE】--- We will provide you with reliable after-sales service. If you are unhappy with our product fro any reason or have any questions, please feel free to contac....
ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots 50 inch Clamp
No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtu....
ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (36 inch Clamp)
No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtu....
Relitec R Clamping Square, 90 Degree Corner Clamp, Right Angle Clamp For Woodworking, Included 2 Aluminum Alloy Positioning Squares (14cm/5.5\)+ 4 Clamps+ 2 Plastic 4\ Square, Tools for Cabinet
...mping. The width is widened from 0.787 inch/20mm to 0.945 inch/24mm, and the height is increased from 0.551 inch/14mm to 0.669 inch/17mm. There is also a longer stainless steel right angle screw design, and the length is extended from 3.94 inch/10cm to 5.12 inch/13cm for thicker boards..
【Accurate 90 Degree Corner Clamps for Woodworking】Our corner clamp kit made of high quality aluminum alloy to ensure 90 degree accuracy. CNC machined, surface Treatment-Anodized red surface, sturdy and durable..
【Easy to Use】Just need put the positioning squares on the corner of the pieces and fixed with a set of wood clamps. It is easy to use and hold the pieces together creating a perfect 90 degree angle. Like having extra hands, very simple, greatly increase your ability to make 90 degree true corners..
【Fit Thicker Boards】Suitable for boards with a maximum thickness of 2.2 inch / 5.6 cm. Apply to assembly more woodworking projects..
【Wide Application】 The woodworking clamps set is great for building pieces such as wooden boxes, kitchen cabinet, drawers, picture frames, birdhouse, mailbox, etc. It's easy to clamping the vertical pieces plumb and to glue up..
【Unique Gift for Arts and Woodworkers】 Our right angle clamp is great woodworking tools....
