Best Fault Guiding

Traceable Excursion-Trac™ Datalogging Thermometer with Calibration; 1 Plastic Bottle Probe

...ble emissivity The emissivity can be adjusted according to the measured object of different materials, the adjustment range is between 0.1-1.0 Select the appropriate emissivity to ensure the accuracy and reliability ofthe measurement.
Application Pre-maintenance and diagnosis in the power and electrical industry Car fault diagnosis Control food hyqiene and safety Electrical fault diagnosis HVAC industry refrigeration industry Iron ore smelting Fault diagnosis in petrochemical industry.

Three choices of temperature control in a single thermostat (Ambient, Floor, or Ambient with Floor temperature limits).
5 mA ground fault circuit interrupter (GFCI) on GA models.
15 mA equipment ground fault protection devices (EGFPD) on GB models.
GFCI and EGFPD test light verifies safety control is functioning properly and alerts if a leak is detected.
Advanced temperature control ensures total comfort by minimizing temperature variations.

Provides continuous ground fault protection - detects and trips on actual ground fault even when self-test is being conducted.
On initial power up, tests the GFCI within 3-seconds.
Auto-monitoring exceeds the UL requirement.
Auto adapts and shifts to more frequent testing if potential problem is detected.
Status indicator light provides simple, intuitive feedback on power and protection status as well as indication of line/load reversal.

Car scanner - reads DTC and clears fault codes from a variety of Electronic Control Units.
It decrypts fault codes (OBD2 Trouble Codes) with the causes of common codes and allows you to turn off the Check Engine lamp..
Dashboard. You can configure dashboard for each ECU with parameters, using 18 variants of templates and choosing any of the types of display: text,....
Data saving - playback of recorded logs of vehicle sensors parameters (important for floating faults, when not ability observe for current data while....
Customizable list of parameters and graphs – tools to quickly and conveniently display only necessary parameters..

Meet S.A.E. J1625, J1171, UL1500 (Ignition Protected)，"Trip Free" design cannot be held "ON" during fault current condition.
300A DC Surface Mount circuit breaker combines switching and circuit protection into a single device，Terminal Size: 5/16"-18.
Housing is thermalplastic UL rated 94V0, "Trip Free" design cannot be held "ON" during fault current condition.
Max voltage: 48V DC, Interrupt capacity: 5000A @12V, 3000A @ 24V, 1500A @ 42V.
Manual Reset Circuit Breaker,can also be used as an on/off button switch for the battery Boat Marine RV Yacht Battery Trailer Bus Truck Solar.

GFCI Outlet - Constructed with premium high-impact resistant thermoplastic materials and rational structure design, ensures superior strength and durability. it a single gang GFCI electrical box that supports a standard duplex, grounded receptacle.
Safe electrical GFCI outlet tester with TEST and RESET buttons and LED Indicator is designed to meet local and national electrical codes..
Safty - The ANKO GFCI USB Outlet meets UL-Listed YGB-094WR, 20 Amp, 125 Volt, 60HZ. Tamper Resistant Receptacle prevents young children from inserting unwanted objects into the outlets. For an added layer of protection, the GFCI regularly conducts an automatic internal test to confirm that it can respond to a ground fault, provides continuous ground fault protection..
Weather Resistant - Constructed with advanced UV stabilized engineering to provide superior corrosion, temperature, and UV resistance, preventing discoloration and aging, ideal for outdoor & indoor use. Ground fault circuit interrupter GFCI outlets are required in kitchens and bathrooms and within 25 feet of heating, air conditioning and refrigeration equipment to prevent electrical shock in areas subject to moisture..

Cable tester with single button testing of RJ11, RJ12 and RJ45 terminated voice and data cables.
Fast LED responses indicate cable status (Pass, Miswire, Open-Fault, Short-Fault, and Shield).
Test remote stores securely in tester body.
Compact tester easily fits in your pocket.
Auto Power-off feature to conserve battery life (9V included).

Ground Fault Circuit Interrupter (GFCI): provides continuous ground fault protection.
15 Amp, 125 Volt, Self-Testing, UL Certified.
Compliant with National Electric Code (NEC) requirements.
Tamper Resistant (TR): Shutter safety mechanism blocks access to power unless a two-prong plug is inserted.
Easy Installation: Side & Back Wiring Capable.
Status Indicator Light provides power and protection status & line/load reversal.