Best Fender Squier 2

FLEOR 13 Hole P Bass Pickguard Guitar Scratch Plate Pick Guard for 4 String USA/Mexican Standard Precision Bass Style, 4Ply Red Tortoise Shell

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up..
There is 13 screw holes in the side of pickguard,without truss rod notch. No holes for thumb rest or pickup cover..
There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation. PURE aluminum foil shield on the backside, better shielding property and anti-interference..
Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white..
Package includes: 1pcs Precision Bass guitar pickguard..

Fits for many electric guitars and basses, including Fender and Squier Strat/Tele/Precision Bass/Jazz Bass and other similar style guitar bass.
Compatible with 6mm (15/64 inch) solid shaft, coarse spline and fine spline split shaft potentiometers, good for most imported pots like Alpha and USA made split shaft pots. DO NOT fit for USA standard 1/4 inch (6.35mm) solid shaft pots.
Height: 19mm (3/4 inch), outer diameter: 19mm (3/4 inch), inner hole diameter: 6mm (15/64 inch).
Made of quality steel, knurled flat top knobs, with set screw to secure the knob to the shaft. You need to tighten the set screw in line with the split when installing this knob on a split shaft pot.
Package includes: 2 pieces knobs and screwdriver.

Fits for many electric guitars and basses, including Fender and Squier Strat/Tele/Precision Bass/Jazz Bass and other similar style guitar bass.
Compatible with 6mm (15/64 inch) solid shaft, coarse spline and fine spline split shaft potentiometers, good for most imported pots like Alpha and USA made split shaft pots. DO NOT fit for USA standard 1/4 inch (6.35mm) solid shaft pots.
Height: 18mm (45/64 inch), outer diameter: 18mm (45/64 inch), inner hole diameter: 6mm (15/64 inch).
Real Abalone top will dress up your instruments well.Made of quality steel , with set screw to secure the knob to the shaft.You need to tighten the set screw in line with the split when installing this knob on a split shaft pot.
Package includes: 2 pieces knobs and wrench.

Fits many tremolo bridges with 52.5mm (2-1/16") string spacing, like Squier, Mexico Fender, or many Strat style guitars stocked bridge.
The saddles help prevent string breakage, improve tone and sustain and keep your guitar in tune. Individual Saddle: 20mm (25/32") Length x 10.5mm (13/32") width.
Hard SUS stainless steel made, long last life. It is a good option to upgrade your existing tremolo bridge for more sustain, smoother feel while playing and more modern looks.
Surface finish is a bit rough, but it is original SUS steel feeling. Includes a wrench for saddle height adjustment, screws and springs.
Package Includes: 6 pieces guitar bridge saddles.

Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option.
11-Holes standard HSS strat style pickguard, large back shielding.
Standard single-coil pickups, ceramic magnet, wax potted, output: 5.7K ohm for neck and middle, 12.5K ohm for bridge.
Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws.
Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode.

Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option.
11-Holes standard SSS strat style pickguard, large back shielding.
Standard single-coil pickups, ceramic magnet, wax potted, output: 5.7K ohm for neck and middle, 6.0K ohm for bridge.
Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws.
Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode.

Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc. , good replacement or upgrade option.
11-Holes standard SSS strat style pickguard, large back shielding.
Dual hot rail single coil sized humbucker pickups, ceramic magnet, wax potted, 9K ohm high ouput.
Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws..
Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode..

Package includes for 2 Pieces amber front side fender marker light cover with sockets and 2 Pieces Red rear side fender marker light cover with sockets, upgrading your pickup truck broken dually fender lights. NOTE: T10 LED bulbs are not included.
Compatibile with: Replacement for 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 F350 F450 F550 Super Duty dually bed fender lights.
These dually bed fender marker lamp covers are perfectly match for the stock fender marker lenses. Interchange part number: 8C3Z15442A 8C3Z15442B F81Z15442CA 15442 15A436 8C3Z-15442-A 8C3Z-15442-B F81Z-15442-CA.
Installation is easy, just reach up inside and clip the retainer from the back. No adapter is needed. You do not need to rewire or splice your wiring.
Warranty: We truly offer 1 year warranty for these fender side marker lamp covers! If you have any questions or issues about these side fender marker lamp covers, Please feel free to us and we will reply in 24 hours.

【FITS FOR】Compatible for 2007-2018 Jeep Wrangler JK & Wrangler Unlimited Includes 2 front driver fender flares & 2 passenger side fender flares..
【EASY TO INSTALLATION】Auttely flat fender flares is very easy to be installed. The installation manual and hardware kit are included in the package..
【ROUGUE & DURABLE】Auttely fender flares are manufactured from heavy-duty black powder-coated stainless steel. Protect wheel wells from mud, scratches, sand, and other outer damage..
【 PACKAGE】 Includes 2 front driver fender flares & 2 passenger side fender flares, installation manual, and a set of mounting hardware such as stainless steel bolts, washers, nuts, etc..
【WARRANTY SERVICE】 If you have any questions before purchasing or during installation, please feel free to contact us, and we will fully refund you.