【Bridge Between You and Music】WARRKY Optical Cable allows you to connect sound bar and home theatre system to your TV, PS4, PlayStation, XBox, and more devices with standard Toslink (s/PDIF, optical, optic) ports. Outperform than your previous optical audio cable. The right fiber optic cable for crystal and clear sound..
【Top-Notch Fiber Core】This 6 ft Digital Optical Audio Cable adopts fiber cores from TORAY, Japan for zero distortion digital audio stream. Ideal for uncompressed PCM audio, compressed 5.1 to 7.1 surround sound systems including Dolby Digital Plus, DTS-HD High Resolution and LPCM. Turn your living room to home theater..
【Ultra Durability】Carefully-chosen nylon material is much more durable than plastic cable. Flexible and lightweight. CL3-rated. Safe for in-wall installation. Aluminum case and gold-plated connector make sure this optical audio cable remain the best performance even after thousands times of using..
【Secure & Snug Connection】Extra thicker gold-plated layer and anti-losing buckle enable this Digital Audio Optical Cable fits standard Toslink (s/PDIF, Optical) port snugly. Thoughtful rubber cap and cable tie help you store this fiber optics cable easier. Free from dust accumulation. Better connector protection....
3 Port Digital Optical Splitter,SPDIF TOSLINK Digital Optical Audio Splitter 1x3(1 in 3 Out),Audio Format Support LPCM2.0 Doldy Digital & DTS 5.1
★【Optical Splitter 1 in 3 out】The optical audio splitter can connect one optical fiber signal input device, then by fiber optic splitter output to 3 sets Optical/TosLink/ SPDIF audio output device..
★【Product safety and reliability】Optical audio cable splitter inserted automatic balance system, signal transmission no loss, no delay, quite stable, besides installed ESD electrostatic protection circuit, make system keep security..
★【Widely Compatible】Plug and play, work with Apple TV, Cable boxes, Roku, Xbox, PlayStation, Blu-ray players, Amplifier, Speaker and other devices..
【Optical audio splitter's transmission distance】For fiber splitter's output, it support transmission within 40m by connecting optical fiber cable, and Loss can be controlled within 0.2db/m.
★【warranty & Service】 We Have A Strict Quality Control System To Ensure A Stable Quality.You Will be 100% Satisfied With Our Product!If You're Not Completely Satisfied You'll be Offered a Prompt Refund or Replacement,Please feel free to contact us for help..
FTTH Fiber Optic Tool Kit 18 in 1 with Fiber Optical Power Meter and 1KMVisual Fault Locator and Cable Cutter Stripper Tool 6C Fiber Cleave Multi-Function Equipment Tool
aluminum alloy visual fault locator fiber optic cable tester meter for CATV test Universally connector for test different ST,SC,FC interfaces.
Handheld fiber optical power meter FC SC cable tester, Wavelength range: 800~1700,Power measurement range: -70~+10.
6C High Precision Fiber Cleaver is an instrument for high precision fiber cutting.It is a multi-purpose optical fiber cutter, the product uses the 16 cutting points and has a longer service life ..
FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250 coating of 125 fiber optic coating of fiber optic coating of fiber optic.
LC to LC Single Mode Insensitive Fiber Patch Cord - Duplex - 2M - UPC/UPC - 9/125um OS2 100G (5 Pack) / - Beyondtech PureOptics Cable Series
Beyondtech high-quality and Insensitive LC to LC Fiber Grade: G.657.A2 Patch Cable Single mode 9/125 OS2 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
This Beyondtech Fiber OS2 9/125 LC/LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm – 0.22 dB/km at 1310 nm.
This LC to LC Single mode Duplex OS2 fiber patch cords operate at -40ºC to +75ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends..
GESD Visual Fault Locator 30km Fiber Optic Cable Tester Meter Red Light VFL with 2.5mm Universal Connector for FC/SC/ST Adapter Pen for CATV Telecommunications Engineering Maintenance
...tor will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output power Design with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
Wide ApplicationUniversal 2.5mm connector designed for ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
CATV Engineering optic network Maintenance.
optical device production and research. LC interface requires additional adapter..
100% Money Guarantee10 years OEM factory competency, Most efficient technical support with superb processing technologyOur committed to provide the best product and services to every customer..
BEYONDTECH SC/APC to SC/APC Fiber Patch Cable Single Mode Simplex - 1m (3.28ft) - 9/125um OS1 / 3.0mm LSZH (1 Pack) - Fios Cable Replacement PureOptics Cable Series
...1 9/125 SC/SC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications. Cable also know as: Fiber Optic Internet Cable..
This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm - 0.22 dB/km at 1310 nm..
This SC to SC Single mode Simplex OS2 fiber patch cords operate at -40ºC to +75ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends..
Visual Fault Locator 30KM, VFL Fiber Optic Light Source Tester 30mW, Red Light Pen Equipment for 2.5mm Universal Connector, FC/SC/ST/LC Adapter for CATV Telecommunications, Fiber Network Cable Test
...tor will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output powerDesign with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
Wide ApplicationUniversal 2.5mm connector designed for LC,ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
CATV Engineering optic network Maintenance.
GESD Warranty10 years OEM factory competency,Most efficient technical support with superb processing technologyOur committed to provide the best product and services to every customer,please do not hesitate to contact us,We are looking forward to your feedback..
LC-SM 6Port Duplex Box Cables 12 Port Wall Mount Fiber Enclosure with Spool Singlemode LC-UPC Kit (Includes a 1 Meter 12 Strand LC-UPC Pigtail and 6 Port Duplex LGX Loaded Panel
【Lower Insertion Loss】Good Low Back Reflection & High Return Loss, This fiber optic pigtail Each insert performance is formance higher than standard requirements in the industry, good temperature stability.★ Set of Accessories is Complete and The Optical Fiber Couplers is Configured and Fiber Pigtail cables are inserted neatly..
【12 Color Mark】12 Strands Cable Individually color coded, Saves time and prevents incorrect patching with color-coded pigtails.★ Plug and Play: Environmentally Stable with strong compatibility.Very convenient in use. Conforms to industrial standard 100% optical test so as to ensure the reliability..
【Widely Used】Perfect for use in Data Centers, premise installations, Optical Fiber LAN, WAN, Telecommunication and Data Processing Networks CATV,instruments,Communication System. Environmentally Stable with strong compatibility.Very convenient in use. Conforms to industrial standard 100% optical test so as to ensure the reliability..
【Zirconia Ceramic Ferrule】Adopt high quality ceramic ferrule, with better coaxiality and size precision. high quality porcelain bushing can provide low insertion loss and better durability.
VCELINK Optical Cable Splitter Fiber 1 in 2 Out Toslink Splitter, 24K Gold Plated Connectors for CD Player, DVD Player, Digital TV, Receiver, Sound Bar, Amplifier (Black)
Multiple components can be connected without switching: The fiber optic cable splitter connects an optical audio source and split it into two receiving devices. It can save the wear of constant plug and unplug of fiber optical cables..
Wide Application: optical audio splitter applies to A/V receiver, Blu-ray Player, hearing aids, soundbar, DVD/CD player, headset, Receiver, Amplifier, etc..
Usage notes Optical splitters 1 in 2 out support 1 male input to 2 female outputs at the same time.
If 2 female inputs to 1 male output, you need to turn off one female inputs device, 2 female inputs can't work at the same time, or will interfere and cause noise..
High Quality: The gold-plated plug has good conductivity, stable signal transmission, and durable corrosion resistance. High-quality optical fiber signal transmission is faster and more stable. Optical fiber splitter doesn't require a power supply and supports DTS sound effects, panoramic surround sound, and 5.1/7.1 channels, giving you the ultimate listening experience..
Packaging and after-sales: 1x optical splitter adapter. The male head is protected by a plastic dust cap. If you have any problems with the product, please don't worry, we provide an 18-month warranty and 24h customer service for....
LC to LC Fiber Patch Cable Single Mode Duplex - 3m (9.84ft) - 9/125um OS1 LSZH - Beyondtech PureOptics Cable Series
Beyondtech high-quality LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
This fiber OS1 LC LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
This SM fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) – LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..