100PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC
It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
Xiaokeis Optical Audio Splitter, 2 in 1 Out Optical Cable Splitter Fiber Replacement, Optical Splitter Dual Port Optical Adapter Audio Cable Fiber Optic Adapter(Black)
✅Optical Splitter - This product is a square fiber female interface, which is used for one-in and two-out distribution.Plug and play, no need for other equipment and softwareSmall and exquisite, easy to use, easy to carry, easy to store.
✅Fiber Splitter 2 In 1 Out Optical Adapter - It supports 1 male input to 2 female outputs at same time.
If 2 female inputs to 1 male output, you need turn off one female inputs device,2 female inputs can‘t work at the same time,or will interfere and cause noise..
✅Optical Audio Splitter - If a power amplifier has only one fiber interface, and there are two fiber interfaces that need to be connected to the power amplifier, use this adapter to get it. No need to change the line when using this adapter, so the interface will not be damaged. Note: It isn't suitable for TV.
✅Audio Cable Splitter - No need to change the line when using this adapter, so the interface will not be damaged. 24k Gold Connectors, 1mm low-loss core, low-jitter synthetic fiber and heavy metal connectors to dampen vibration, giving you the ultimate listening experience.
Analog Multiplexer Single 8:1 ñ9 Volt 20 Volt 16-Pin Plastic DIP Tube
The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Eth....
Optical Audio Cable, WARRKY 10ft Fiber Optic Cable [Metal Case, Nylon Braided, Gold Plated Plug] Digital Optical Audio Toslink Cable Compatible with Sound Bar, TV, PS4, Xbox, Samsung, Vizio
【Bridge Between You and Music】WARRKY Optical Audio Cable allows you to connect Sound Bars and Home Theatre to TVs, PS4, PlayStation, XBox, and more devices with standard Toslink (s/PDIF, Optical) ports. The right Optical Cable for crystal and clear sound..
【Top-Notch Fiber Core】This 10 ft Digital Optical Audio Cable adopts fiber cores from TORAY, Japan for zero distortion digital audio stream. Ideal for uncompressed PCM audio, compressed 5.1 to 7.1 surround sound systems including Dolby Digital Plus, DTS-HD High Resolution and LPCM. Turn your living room to home theater..
【Ultra Durability】Carefully-chosen nylon material is much more durable than plastic cable. Flexible and lightweight. CL3-rated. Safe for in-wall installation. Aluminum case and gold-plated connector make sure this digital audio cable remain the best performance even after thousands times of using..
【Secure & Snug Connection】Extra thicker gold-plated layer enable this Digital Optical Audio Cable fits standard Toslink (s/PDIF, Optical) port snugly. Thoughtful rubber cap and cable tie help you store this fiber optics cable easier. Free from dust accumulation. Better connector protection..
【WARRKY】is confident in the quality of this Audio Optical Cable. All WARRKY produc....
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
The default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77..
In the address of 0x70~0x77, 8 expanders can be cascaded, and each expander can be connected to 8 devices with the same address, so that the same I2C port can be connected to 64 devices with the same address and can be used normally..
The chip is compatible with 3V and 5V and can be used with any logic level.
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Mode Type: OS2 (9/125 Singlemode) – 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications....
Fiber Patch Cable Details: 1 Meter (3.28 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Bend Insensitive, Plenum, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light trave....
Interior Car Lights, WEBUPAR Car Accessories 10 in 1 Car LED Strip Lights with APP Control, 236 inches Fiber Optic, Multicolor RGB Neon Car Lighting Kits with Music Sync Mode and DIY Mode
【Upgraded 10-in-1 Car Ambient Light】 This interior car LED light consists of 6 fiber optic lights and 4 under dash lights, and has 236-inch fiber optics, which can be flexibly installed in any car..
【236-inch Integrated Optical Fiber】 The RGB car LED light strip adopts integrated optical fiber, which does not need to penetrate the optical fiber into the transparent tube, convenient and time-saving. It has better light transmittance and higher brightness than traditional cased optical fiber..
【Remote Control + Upgraded APP Control via Bluetooth】 Remote control: 8 static color(red, green, blue, white, orange, yellow, cyan, purple), 3/7 colors jump, 3/7colors fade, 4 music modes and adjustable brightness. Use APP control after Bluetooth connected with the led lights for car: 16 million colors, brightness 1%-100%, DIY color, voice control mode, 20 preset modes, timing function..
【Dynamic Music Sync】The interior led lights equipped with a built-in high sensitive mic, it adjusts colors and speed following the ambient music as well as sound. Say goodbye to dreary car trip and enjoy the fun of light changing with car stereo music or your voice..
【2 Installation Methods】 With a car cigarette lighter plug (with fuse) and a power cord that can b....
