3 Pieces 4-1/2 Inch Sanding Disc Backing Pads Replacement Disc Backing Pads Sander Backup Pad with M14 Thread Lock Nut for Angle Grinder
What will get: there are 3 pieces of sanding disc backing pads in the package, each is equipped with a lock nut, enough quantity to meet your daily replacement needs.
Reliable material: black sander backing pad is made of polypropylene, lock nut is made of metal, which is practical and durable to use, not easy to break, resistance to dirt, can serve you for a long time.
Dimension detail: angle grinder backing pad is 4-1/2 inch/ 115 mm in diameter, and 0.55 inch/ 14 mm in diameter for inner hole, easy to use, and fit on standard angle grinder, polishing machine, grinding machine and more.
Note: please confirm the size before purchase.
Wide application: using with a sanding disc on an angle grinder, suitable for 4-1/2 inch diameter disc with a 14 mm inner hole, also suitable for using at home, warehouse, repair shop, decoration shop and other places.
Maximum RPM: the maximum RPM is 12000, and all sanding discs can be applied with the sanding backing pad, flexible and durable, which can be easily installed and removed, and can be applied repeatedly with round sandpaper.
❤ You can get 4 pack 2 inch hooks and loop backing plate, the maximum speed is 15,000rpm, Universal dual action random orbital polisher standard backing pad size M6 x 1.0 Thread..
❤ Sanding disc backing pads is used on the DA sander polisher buffer, it is durable and can be pasted with various 1inch polishing products, such as sandpaper sanding disc, sponge waxing buffing pad, wool polishing pad and so on. Ideal for sanding focus areas, removing solder joints and rust spots on metal products, deburring furniture and woodwork, mold manufacturing, polishing automotive and detailing work,etc..
❤ Self-adhesive backing plate design：The hook and loop backing pad adopts self-adhesive design, which is easy to stick, quick to peel, time-saving, labor-saving and durable. Light weight, low vibration, high stability, low vibration rate and low energy consumption..
❤ Eccentric double-rotation polishing method to make the polishing effect more uniform and smooth. The edge of the backing pads is soft and deformable. When the curved surface is polished, the backing plate can fit the curvature of the polishing working surface, which makes it easier to achieve the polishing effect and prevent accidental contact and damage to the painted surface..
OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
Walter Surface Technologies 15D054 Backing Pad Assembly - Round Hole Fastening Flexible Backing Pad. Sanding Accessories
Specifications: orange backing pad with 5 in. diameter offers support to the abrasive sanding discs. Round armor hole fastener with 5/8-11 in. clamping nut ensures secure mounting of the pad.
Utility: sanding backing pad allows air flow behind the sanding disc for proper heat dissipation. This backing pad is manufactured from high-quality, impact resistant plastic that helps increasing the life of your sanding discs.
Versatile: flexible design of the sanding disc pad helps in gentle to aggressive weld removal and blending for finer finishing on both erratic and curved surfaces.
Compatibility: sanding back pad works efficiently with 5 in. Coolcut and Topcut resin fiber sanding discs from Walter Surface Technologies.
Productivity: mounting pad is rated for its efficiency with maximum 12200 rpm rotational speed. The sander backing pad ensures uninterrupted industrial metal fabrication.
Dorman 14505 Clutch Alignment Tool Compatible with Select Models
OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
