Outus Drywall Joint Tape, Drywall Mesh Tape Self-Adhesive Fiberglass Drywall Repair Fabric Adhesive Tape for Wall Cracks Seam Patch, 2 Inch by 131.4 Feet, 1 Roll
Size and material: 1 roll of 50 mm (width) x 40 m (length) fiberglass tape, made from fiberglass with 2 mm x 2 mm mesh holes.
Dependable performance: its tension is 340 N (warp) x 303 N (weft) and the density is 18 mesh (warp) x 16 mesh (weft), both exceed the standard value, strong enough for use.
Self-adhesive and repositionable: no need to pre-apply a joint compound for snag-free installation, easy to paste on or off for difficult work, quickly repair holes and cracks in drywall.
Wall reinforced material: sticky fiberglass reinforced joint tape, strong adhesion is good for making long-playing joins.
Application: use for joining plasterboard, mending cracks and holes gap sealing, strengthening and finishing joints of interior drywall panels.
GYROS 1.5” Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory | Made in USA 11-32156/12
Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are designed to cut High-Tensile Strength materials cleanly. These Fiber Disk cutting discs are perfect for professional, commercial, and DIY production due to their minimal heat generation and thin cutting line. They are made in the United States and have a maximum speed of 45,000 RPM..
Double Reinforced, High Quality – Our cutting discs have a high working efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk HT Multi-Set is a must-have for professionals and hobbyists looking for the best Dremel and other top-brand rotary tool accessories..
High Tensile Strenght – Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
Glarks 20 Pack XLR 3 Pin Male/Female Plugs Audio Mic Microphone Cable Plug Connector Audio Socket Black Sliver Housing
♚ What You Get: In this set, it include 10pcs XLR Female connectors and 10pcs XLR male connectors, they are well packed in a plastic box, easy to....
♚ High Quality: Made of premium material, sturdy, metal construction, the housing for high strength zinc alloy die-casting polished black spray....
♚ These are professional series XLR plugs, compact design with sturdy diecast shell, fiberglass reinforced hard plastic insert for secure clamping....
♚ Locking metal end: The female locking end has a rubber grommet. This allows the ends to snap into place without being loose..
♚ These male and female XLR connector come with no screws easy to assemble, matched well with each other, perfect for making custom cables such for....
GYROS 2” Mini Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory. Made in USA 11-32208/12
Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are designed to cut High-Tensile Strength materials cleanly. These Fiber Disk cutting discs are perfect for professional, commercial, and DIY production due to their minimal heat generation and thin cutting line. They are made in the United States and have a maximum speed of 30,000 RPM..
Double Reinforced, High Quality – Our cutting discs have a high working efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk HT Multi-Set is a must-have for professionals and hobbyists looking for the best Dremel and other top-brand rotary tool accessories..
High Tensile Strenght – Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
AQUA BOUND Sting Ray Hybrid 2-Piece Kayak Paddle, White FG Blade/Carbon Snap Button Shaft, 210 cm
MADE IN OSCEOLA, WISCONSIN, USA. Like all Aqua-Bound paddles, the Sting Ray 2-piece paddle is hand-built in Wisconsin, staffed by paddling enthusiasts..
2 PIECE CONSTRUCTION. The Sting Ray breaks into two pieces with a simple snap-button ferrule for easy travel and storage.
Injection-molded abX II blades are reinforced with fiberglass fibers, stronger than plastic.
Ovalized paddle shaft provides a comfortable grip.
GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702
Efficient and Smooth Cuts - The Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are precisely developed to cut materials with low tensile strength. These Fiber Disk cutting discs are perfect for both professional and DIY production due to their low heat generation and thin cutting line. They are made in the United States and have a maximum speed of 42,000 RPM..
Double Reinforced, High Quality - Cutting discs are made of fiberglass abrasive with a double reinforced structure, they have a great working efficiency, unrivaled strength, and flexibility, are long-lasting and break-resistant. Professionals and hobbyists looking for the best rotary tool accessories for Dremel and other top-brand rotary tools will appreciate the Gyros Fiber Disk LT Multi-Set..
Low Tensile Strenght – Gyros LT mini cutting discs are designed to cut a variety of materials, including Wood, Plastic, Stone, Ceramic, Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002
Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are specially designed and formulated to cleanly cut Super-Tensile Strength materials. These Fiber Disk cutting discs are perfect for commercial, professional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 30,000 RPM..
Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensi....
SAFE THERMAL PROTECTION: The Fiberglass Fire Blanket Retardant , 6’ x 4’ Foot is a 100-percent flame retardant welding blanket that prevents accidents, injuries, and property damage that can be caused from sparks, flares, and splatter.
VARIOUS APPLICATIONS: Protect your furniture, flooring, wood railings, and yourself from sparks, embers, molten metal, and heat that comes from welders, grills, smokers, and more.
We do not recommend cutting this blanket into smaller sections – Simply fold to accommodate smaller applications.
BUILT TO LAST: Constructed from 19.8 oz/yd² fiberglass with up to 1,000-degrees Fahrenheit (537°C) working temperature for maximum thermal protection in any light to heavy duty general welding applications.
REINFORCED: Tight weaving pattern is 30 x 30 per inch² to keep it bound together and reduce wear and tear for ultimate durability.
Reinforced hem with 3/8-inch (1cm) inside diameter (ID) brass grommets every 12 inches (aprox.) for secure and easy hanging.
EASY STORAGE: This flexible fiberglass blanket is pliable like any normal blanket and folds up to a compact size for easy transport, simple storage, and quick organization.
