HIGH-SHINE SILK PLA: This glossy material has a bright, silky luster that will bring your colorful creations to life. Silk filament is perfect for your large curved surface models or practical models that you want to shine..
HIGH-QUALITY SILK FILAMENT: Designed with the highest quality and compatibility in mind, Inland Silk PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality shiny print..
EASY-TO-USE: The Inland Silk PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament is compatible with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free do no....
Upgraded 3D Printer Filament Dryer Box, SUNLU Filament Dehydrator Dry Box, Keep Filament Dry During 3D Printing, Spool Holder,Compatible with 1.75mm, 2.85mm, 3.00mm Filament,Storage Box
①【Keep dry, good printing effect】Dust-free, moisture-free. 3D printer filaments are hygroscopic, moisture can cause printing failure, SUNLU filament dryer box help to dry excess moisture, keep the filament dry, no more brittle PLA, PETG, ABS filament..
②【Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting. SUNLU dryer box can be used as a spool holder. The bearings that hold the filaments are very stable and allow the filament to roll steadily..
③【Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased. It can be more helpful if you live in a humid temperature zone.SUNLU filament dryer box is easy to open and the lid is transparent allowing direct inspection of the length of filament remaining in the box..
④【High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours. Maximum capacity of the drying oven: 210*85 mm, can accommodate filament diameter: 1.75mm/2.85mm/3mm..
YOUSU Carbon Fiber PLA Filament 1.75 mm for 3D Printer & 3D Pen 1 kg (2.2 lbs) Black
[Premium PLA Filament] Carbon fiber filament Compared with PLA, stronger toughness, higher strength and rigidity, brittle feel, low shrinkage, high fluidity, suitable for printing industrial products.
[Problem Free & Easy to Print ] Yousu Carbon fiber PLA filament has better dimensional stability for warp free printing, excellent layer adhesion,clog-free, bubble-free and easy-to-use, and easy support removal..
[ Cost-effective and Wide Compatibility ]Our Yousu Filament is Compatiable for Most FDM 3D Printers in the market,Such as Creality Ender,Ender 3,Anycubic,Flashforge, Makerbot,Aquila,Etc..
[Vacuumed Sealed Package] The Filament Net Weight: 1KG. Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed. NOTE:Please pass the filament through the fixed hole to avoid tangles after use..
[Recommended printing conditions]: 195°C-220°C (depending on the printer model), Printing speed: 50-100mm/s. Hot bed temperature: 50 – 60°C.
Upgraded 3D Printer Filament Dryer, SUNLU Dry Box for Filament Storage, Keep Filament Dry During 3D Printing, Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament, Filament Holder
【SUNLU Dryer and Storage Box】SUNLU dryer box is specifically made for drying 3d printer filament, intended to remove moisture from the filament. It can keep the 3d filament dry during printing and can be used as a filament storage box..
【Rapid Heating and Constant Temperature】The dryer box can be quickly heated to the preset temperature, and keep working within the preset time. The built-in rotating shafts keep rotating the filament, evenly heated and remove moisture..
【Large Capacity and Useful Design】Maximum capacity of the Dry box is 210*85mm, it works perfectly with 1.75mm/2.85mm/3.00mm diameters filament. It's designed with a transparent lid that you could check the filament without open the lid..
【Simple but Effective】The dryer box is pretty easy to use, it crams in a lot of functionality even with only two buttons(set temperature, time and more). It can help to keep moisture out of the filament, get dry and stay dry..
【Multiple Settings】The temperature ranges is 35-55℃, the working time range is 0-6 hours, you can set different temperatures and times for different materials of filament, get the filament dry and have better print results, very useful..
✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
✔PREMIUM QUALITY - The pla have good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Amolen filament, which have premium quality, print Much More Smoothly..
✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
✔HASSLE FREE - AMOLEN is focus of special and better quality PLA filament. We provide professional 3D printing technical guidance and perfect customer service. Defective filament can be reissued or refunded fully. Why not choose AMOLEN 3D Printer Filament？.
Wire Pulling Lubricant: The polymer based lubricant provides maximum tension reduction in high-stress electrical and communications cable-pulling operations.
High Cling Factor: The Aqua-Gel II lubricant has a high cling factor for friction reduction in short or long cable pulls.
Environmentally Safe: The non-toxic, non-flammable, non-corrosive lubricant cleans up easily with soap and water and dries to a semi-fluid film which won't clog conduit.
Wide Compatibility: This lubricant is best suited for outdoor utility applications and is rated for use with all cable jacket types except for composite rubber.
Product Specifications: The IDEAL AquaGel II lubricant is stable from 28°F to 180°F and is packaged in a 1 qt squeeze bottle.
LAFIYA Water Based Lubricant Vitamin E Creamy White Lube for Vaginal and Anal Sex Long Lasting Non Sticky Slippery Personal Lubricant Moisturizer for Women Men Massage 10 oz
ADVANCED LUBRICANT: Unique formula. Lafiya white lubricant contains Vitamin E which is beneficial for skin, such as anti-aging, maintain estrogen....
A DIFFERENT COLOR, A BETTER EXPERIENCE: Tired of transparent lube? We designed this white lube for you. It looks like cum, and you will have a....
WATER BASED, CONDOM COMPATIBLE: This is a water-based lubricant, not silicone lubricant. It is suitable for using with silicone products, like condoms....
SUITABLE FOR ANAL SEX, ORAL SEX AND VAGINAL SEX: Providing best products to all our customers is our mission, many customers experienced our lubricant....
ENJOY THE BEST SEX OF YOUR LIFE: We designed this lubricant for our Americans, no matter your skin is sensitive or normal. Choosing Lafiya lubricant....
SainSmart PLA 3D Printer Filament,Toughness Enhanced PLA,Dimensional Accuracy +/- 0.03 mm, 1 KG Spool, 1.75 mm, White
Recommended Extrusion/Nozzle Temperature: 200 - 240 °C.
Recommended Bed Temperature: 60 - 80 °C.
High Strength PLA+ Filament has excellent machinal properties when compared with general PLA filament, its impact resistance is 4 times the standard one, tensile strength 1.5 times and elongation at break even 10 times. In combination with its resistance to temperature up to 68 °C (154°F), this PLA+ filament is a great fit for functional use..
Quality raw materials that eliminate impurities and bubbles, enabling smooth and effective filament feeding without jamming and warping..
With filaments well-wound onto the spool and a +/- 0.03 mm dimensional accuracy, what you got is a tangle-free filament that delivers smooth and consistent performance..
This PLA filament is an odorless and environmentally-friendly, plus with its ease of printing, making it your all-around, everyday budget filament..
AMOLEN PLA 3D Printer Filament,PLA Filament 1.75mm,Silk Filament Bundle,Gold, Silver,Bronze, Red Copper,3D Printing Filament Bundle, 200gX 4 Spools
【SILK PLA FILAMENT】 -PLA silk filament is very smooth and shiny, the silky texture, bright colors are focused on this pla filament. There are four colors silk red copper,silk bronze,silk gold and silk silver you can use it to print many beautiful and peculiar object. Silk filament will not disappoint you..
【PREMIUM QUALITY】- Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder, silk pla filament, which have premium quality, print Much More Smoothly..
【HIGH COMPATIBILITY 】- Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler. 1.75mm pla filament diameter, accuracy +/- 0.03mm. Stable diameter accuracy offer you a smoothly feeding experience..
【VACUUM BAG】 - Vacuum packaging with desiccant to keep it dry and keep out dust. Transparent plate makes you more easier to check the color and remaining pla silk filament..
【WARRANTY & AFTER-SALES SERVICE】--Amolen is focus on high quality 3D pla filament, defective filament can be reissued or refunded fully.We provide professional 3D printing technical guidance and good 24/7 customer service..
