①【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
③【2KG PLA 3D Filament】SUNLU 2KG PLA filament MasterSpool includes 1 reusable spool(MasterSpool) and 2 rolls PLA 3D printer filament 1.75mm refills, '1+2' combination..
④【Reusable MasterSpool】SUNLU MasterSpool is reusable, it's compatible with many brands of 3D printing filament refills(spool-less filament), which is a good idea to reduce waste and cost..
⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
JAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent
【PLA+ Filament Bundle Multicolor】PLA Plus 3D printer filament bundle multicolor, 10 colors in total: Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent. 10 rolls of multicolor 250g PLA+ Filament, individually vacuum packed, 2.5KG in total..
【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better..
【Neatly Wound Filament】Adopting 100% neatly line up filament skill, produced with full mechanical winding and strict manual examination. Making sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of ....
AMOLEN 3D Printer Filament Glow in The Dark Multicolor PLA Filament, 3D Printing Filament Color Change in 10 Meters, 1KG
GLOW MULTICOLOR CHANGE - Every 10 Meters color change with Green,Blue,Purple and Pink. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament.
UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding.
HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
GIFT FOR KID - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children..
VACUUM & REUSABLE BAG - Vacuum packaging with desiccant....
AMOLEN 3D Printer Filament,PLA Filament 1.75mm,Shiny Glow in The Dark,Starry Sky 3D Printing Filament,1kg
✔GLOW PLA FILAMENT - Contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament.
✔UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding.
✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
✔GLOW LIKE STARRY SKY - When not glow, the filament shows transparent and black with some spots. After charge, the spots will glow in the dark and shiny like starry sky. You can change the fulling to change the density of the stars. Higher filling will get more shiny spots..
SUNLU S9 Plus Large 3D Printer, FDM 3D Printers with Filament Dryer Integration, Clog Detection, Auto Leveling, Silent Motherboard, Open Source, Touch Screen, Big Printing Size 310x310x400mm
【8 Rolls of 0.25kg 1.75mm PETG Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PETG filament.Color:Black+White+Grey+Transparent+Blue+Green+Red+Orange.The design of 250g PETG filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
【SUNLU Toughness-enhanced PETG Filament】SUNLU 3d filament PETG 1.75mm is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It’s about as stiff as PLA. PETG 3d filament suggest printing temperature is 220-250°C – Base Plate Temperature: 70-80°C if no glue applied..
【High Precision +/- 0.02mm Tolerance PETG filament】: 1.75mm PETG 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PETG filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free..
【High Compatiblity & Vacuum Pack PETG Filament】Compatible with ....
Shiny Silk Gold Silver Copper PLA Filament Bundle, 1.75mm 3D Printer Filament, Each Spool 0.5kg, 3 Spools Pack, with One 3D Printer Remove or Stick Tool MIKA3D
✔GLOW PLA FILAMENT - Contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament.
✔UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding.
✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
✔GIFT FOR KID - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children..
SUNLU 250g PETG Filament 1.75mm Bundle, 3D Printer Filament, Toughness PETG Filaments, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls, Black+White+Grey+Transparent+Blue+Green+Red+Orange
① 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use..
②【SUNLU PLA 3D Printer Filament】PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use..
③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers..
④【Filament Spool Diameter】Spool Diameter: 8.00″, Spool Width: 2.50″, Spool Hub Hole Diameter: 2.20″. The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers..
⑤【Recommend Settings】We recommend printing the PLA filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s..
INLAND GLASS PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Glass PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
EASY-TO-USE: The Inland Glass PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY GLASS PLA: Glass PLA filament is non-toxic, the mater....
SUNLU ASA Filament 1.75mm UV/Rain/Heat Resistant Tough 3D Printer Filament Great for Printing Outdoor Functional Mechanical Parts 1kg Spool 2.2lbs 395 Meters Red
① 【SUNLU ASA 3D Filament】ASA filament is kind of very strong and tough filament, stronger than PLA filament and ABS filament. No clog, no....
②【Super Neat Filament Spool】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is....
③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable....
④【Recommend Settings】We recommend printing at a nozzle temperature of 230-260°C(446-500°F), bed temperature of 80-120°C(176-248°F), printing....
⑤【UV/Rain/Heat Resistant】SUNLU ASA 3D printing filament is great for printing outdoor functional mechanical parts, UV/Rain/Heat highly....
INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
