Best Finishing Saws

Festool Plunge Cut Track Saw TS 55 FEQ-F Plus FS w/55" Guide Rail

  • The Festool TS 55 is not your standard circular saw. The saw rides on a guide rail, or track, providing accuracy and versatility allowing it to replace the world's most advanced cabinet saws, miter saws and panel saws. The TS 55 track saw delivers precise, splinter free, glue ready cuts and only takes seconds to setup. Breaking down sheet goods? Cuts at an obscure angle? No longer is there a need to design a complex jig or move heavy material to your large shop equipment..
  • The TS 55 track saw works seamlessly with it's integrated rail, available in various sizes. Utilize the rail and saw with or without a table or work surface. The track saws flat housing allows for flush cutting..
  • Concentrated torque and up to twice as fast work progress with an increased saw blade service life..
  • Virtually splinter-free on both sides thanks to attachable splinter guard..
  • The cutting edge from 90° to 47° remains unchanged even when the saw bevels..
Check Stock

WEN BL0736 7-Inch 36-Tooth Carbide-Tipped Professional Saw Blade for Steel Cutting

  • Featuring a 7-inch diameter (178 mm), a 20 mm arbor, and a rating of up to 3500 RPM.
  • Perfect for slicing through steel and metal.
  • Ultra-thin 1/10-inch kerf (2.0 mm) provides clean and efficient cuts.
  • Designed with 36 carbide-tipped teeth for general-purpose steel cutting.
  • Compatible with 7-1/4-inch circular saws, track saws, and miter saws.
Check Stock

Delta Diamond Mad Dog HS 12 Inch Segmented Diamond Saw Blade, .125 X 1\-20mm Arbor, Made in USA, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (12\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - Made in USA. 12" diameter X .125 thick with a 1" arbor fits most masonry saws and hand-held saws. Preinstalled 20mm bushing for adapting to other power saws. Drive pin hole for walk-behind / self-propelled saws from 8-24hp. The maximum safe operating speed is 6,300 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Mad Dog HS 14 Inch Segmented Diamond Saw Blade, .125 X 1\-20mm Arbor, Made in USA, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (14\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - Made in USA. 14" diameter X .125 thick with a 1" arbor fits most masonry saws and hand-held saws. Preinstalled 20mm bushing for adapting to other power saws. Drive pin hole for walk-behind / self-propelled saws from 8-24hp. The maximum safe operating speed is 5,460 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

(10 Pack) 14 inch Dry or Wet Cutting General Purpose Segmented High Speed Diamond Saw Blades for Concrete Stone Brick Masonry (14\ - 10 pcs)

  • SPECIFICATIONS - 10 Pack of 14" diameter X .125 (1/8") thick with a standard 1" arbor hole fits most hand-held machines and masonry saws. Included is a 20mm bushing for and a drive pin hole for adapting to 8-24hp walk-behind saws. Max. 5,460 rpm. Made from a balanaced, heat-treated, high-speed steel core and is guaranteed to withstand the demands of dry cutting. Contains 10 blades in package..
  • Can be used wet or dry. For light or medium duty cutters..
  • Used on handheld high speed saws and low horsepower walkbehind saws (up to 13 hp).
  • PREMIUM DIAMOND BOND MATRIX - Allows for faster, longer lasting, and smoother cutting diamond blade resulting in better performance with less stress on the operator and machine..
Check Stock

CMT 201.030.12 12\ x 30 Tooth FTG, .126 Kerf, 1\ Bore Table Saw Ripping Blade

  • For for fast, smooth, heavy-duty rip cuts on soft/hardwood. Good performance on plywood..
  • To be used on radial arm saws, miter saws, table and special saws..
  • 0.126 kerf thickness, 0.087 plate thickness, 20° hook angle, FTG-Flat Top Grind..
  • Micrograin carbide teeth to last longer and deliver smooth cuts..
  • Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion..
Check Stock

WEN BL1024 10-Inch 24-Tooth Carbide-Tipped Professional Multi-Material Framing Saw Blade

  • Featuring a 5/8-inch arbor (15.88 mm) and a rating of up to 4500 RPM.
  • Perfect for framing, trim carpentry, remodeling and more.
  • Ultra-thin 1/10-inch kerf (2.0 mm) provides clean and efficient cuts.
  • Designed with 24 carbide-tipped teeth for general-purpose wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock

WEN BL1028 10-Inch 28-Tooth Carbide-Tipped Professional Multi-Material Framing Saw Blade

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 4500 RPM.
  • Perfect for framing, trim carpentry, remodeling and more.
  • Ultra-thin 1/10-inch kerf (2.0 mm) provides clean and efficient cuts.
  • Designed with 28 carbide-tipped teeth for general-purpose wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock

CMT P10024 ITK Plus Ripping Saw Blade, 10 x 24 Teeth, 10° ATB+Shear with 5/8-Inch bore

  • For fast and excellent rip cuts thanks to the shear angle design..
  • Use on radial arm saws, miter saws, table saws for cutting soft and hardwood..
  • 0.094 kerf thickness, 0.063 plate thickness, 20° cutting angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock

HAUTMEC Professional Bi-Metal Steel Mini/Junior Hacksaw Blades 6 inch, High Speed Steel Grounded Medium Teeth, Pack of 10, HT0150-CT

  • Four ATB teeth and one raker with deep gullets allow for deeper cuts and improved chip-flow.
  • For cross cutting and ripping soft and hardwoods, plywood, and particleboard.
  • On table saws, sliding table saws and cut-off saws.
Check Stock