Best Flame Arrestor Fittings

Brass 45 Degree Flare 1/4\ OD Plug, SAE Flared Tube Fitting, Seal Plugs, 5pcs

  • 1/4" OD 45°flare Plug fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out..
  • The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety..
  • Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical..
  • For use with LP and natural gas, refrigeration, and hydraulic applications..
  • Not for use in potable drinking water applications.
Check Stock

Exhaust Muffler Carbon Fiber 1.5-2\Inlet with Removable DB Killer for Street/Sport Motorcycles and Scooters with 38-51mm Diameter Exhaust Pipes

  • The FMF Turbinecore 2 spark arrestor silencer is their best selling silencer for FMF because of their reputation of quality performance enhancing design..
  • The FMF Turbinecore 2 silencer has earned the U.S..
  • Forestry stamp of approval with the built-in spark arrestor in addition to the FMF exclusive "Turbinecore Dampening System." The Turbinecore 2 silencer is a straight-through design that is less restrictive than stock for great track and trail performance..
  • Match the FMF Turbinecore 2 silencer with a FMF pipe to maximize the potential of your bike.The best-selling Turbinecore 2 uses the exclusive "Turbine Dampening System."This top-notch product has well-earned its U.S..
  • Forest legal status.The straight-through design of the spark arrestor canister and the performance flow stainless steel end cap ensures strength, durability and most importantly, track and trail proven unrestricted power.The Turbinecore 2 is the #1 spark.
Check Stock

SUNROAD 30 Gallon Portable Gas Caddy Fuel Transfer Tank Rotary Hand Pump Gasoline Diesel Storage Can with Wheels for Automobiles ATV Car Mowers Tractors (Bright Yellow)

  • Helps fill all equipment, no awkward bending, tipping, or holding required..
  • DIMENSIONS: (D x W x H): 13.1 x 10.24 x 15.61 inches.
  • FLEXIBLE ROTATING SPOUT: The spout is located on the bottom of the can making refueling painless..
  • SMOOTH & CONTROLLED FLOW: Self-venting for smooth fuel flow and spill-free design..
  • THUMB TRIGGER: Trigger releases fuel on command, making sure you're always in complete control..
  • DURABLE: The six-layer construction provides long-term dependability and adds rigidity to the can..
  • SAFE: The safety cap, conductive spout, flame arrestor, and FMD offers protection to the user..
  • WARRANTY: All SureCan products come with a 3-year warranty.
  • CERTIFICATIONS: FM Approved. Meets OSHA, CARB, NFPA, and MSHA Type-II Safety Can Guidelines..
Check Stock

Jamco Manual Closing Doors Forkliftable Safety Steel Storage Cabinet for Flammable Liquids, 45 Gallon, 34-Inch x 18-Inch x 70-Inch, Yellow

  • FIRE SAFETY FEATURES: Safety cabinets have an all welded double wall 18-gauge construction with 1-1/2" insulating air space for increased fire protection, 2-Inch leakproof sill contains leaks and spills inside the cabinet, lockable flush mounted handle with 2 keys, grounding connector, twin 2-Inch flame arrestor vents.
  • HEAVY DUTY CONSTRUCTION: Safety cabinet doors are double wall 14-gauge outside and 18-gauge inside with 56% more steel in the door than competitors, 4-Inch heavy duty welded hinges with brass pins. Durable powder coated yellow finish. 4-Inch high feet allow movement with a forklift truck. Proudly made in the USA..
  • QUALITY CHECKED: This Safety Flammable Cabinet meets multiple international fire and safety certifications and standards, including OSHA, NFPA Code 30, Uniform Fire Code (UFC 79), and FM Class 6050 approved..
  • CAPACITY: 2 adjustable galvannealed steel shelves, maximum chemical storage 45 gallons..
  • FIRE CABINET DIMENSIONS: 43-Inch Width x 18-Inch Depth x 70-Inch Height..
Check Stock

Coaxial N Type Lightning Arrestor 0 to 6 GHz (N-Male/N-Female) 50ohm,Protects 3G, 4G, LTE,GPS, 2.4GHz /5GHz Wi-Fi, 900MHz, Ham Other Outside Antennas

  • 1.Reliable Wide-band Performance (DC ~ 6 GHz) ,Lightning arrestor 50 Ohm ,Bi-Directional Protection (N-Male / N-Female Connectors) - Bulkhead / Panel / Outdoor Mountable - High Quality Construction.
  • 2.Lightning arrester protects HAM Radio Equipment and GPS Receivers.Protects 900MHz, 2.4GHz & 5GHz WiFi Outdoor Antennas,Protects 50 Ohm 3G, 4G, LTE Cellular Boosters and Amplifiers.
  • 3.Lightning surge protector n female is very Low RF Insertion Loss (Signal Attenuation) - 50 Ohm Impedance - DC Pass-Through.
  • 4.Pack one piece Ethernet lightning arrestor,replaceable 90V Gas Discharge Tube with Multi-Strike Capability Shunts Damaging Surges,Transients,and Lightning Strikes to Ground.
  • 5.N connector lightning arrestor Connect to Antenna Coax Feedline and Earth Ground.
Check Stock

Big Gun Exhaust EVO U Series Exhaust System

  • High-temp black thermal coated oval shaped aluminum muffler. TIG welded reinforced muffler bracket.
  • 304 stainless steel mid pipe/ head pipe. Black powder coated stainless steel end tip. Much lighter than stock exhaust.
  • Massive horsepower and torque gains. Sleek muffler design allows for maximum clearance. Vortex Quiet Insert included.
  • Removable screen-type USFS approved spark arrestor. Handmade in the USA. 1 Year Limited Manufacturers Warranty.
  • Removable screen-type USFS approved spark arrestor. Handmade in the USA. 1 Year Limited Manufacturers Warranty...
Check Stock

2 PACK Gas Can Stopper Cap Replacement Part or Spout Cap Compatible with Midwest Scepter Moeller Eagle Gott Rubbermaid Essence Igloo Blitz StanCan Kolpin RotopaX can,For Plastic Fuel Tank

  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, you can bend freely without breaking.Thicker....
  • Update your old gas can with these flexible spout, you will never spill gas all over yourself and your equipment again.
  • Push - in vent cap for faster and safer emptying, filter/flame arrestor prevent any serious damage for smoother and cleaner pouring.
  • Gas Can Spout Kit Come with Fine&Coarse thread screw caps, UNIVERSAL compatible with Rubber main Essence Blitz and Gott Scepter Midwest most of....
  • Kit includes (1) Flexible gas spout, (1) spout cap with string, (1) "O" ring gasket, (2) base caps, (1) push-in vent cap,(1)black rear vent cap. 3....
Check Stock

RIDGID 48553 MegaPress Jaws And Rings, 1/2 Inch to 2 Inch MegaPress Kit, Hydraulic Crimping Tools

  • Ideal for black iron pipe in chilled water lines, natural gal lines, compressed air, heating fuel oil, and is FM and UL approved (pending) for the installation of fire sprinkler systems.
  • The MegaPress Jaws and rings and RIDGID Press Tools work together to allow press connections on “wet” sprinkler systems.
  • No Flame Required - MegaPress fittings and RIDGID Standard Press Tools work as a flameless system that eliminates the need for hot work permits.
  • Backed by RIDGID Full Lifetime Warranty against material defects and workmanship.
  • For use with MegaPress and MegaPress G fittings to join 1⁄2 inch to 2 inch commercially-available black iron pipe schedules 5-40.
Check Stock

Big Gun Exhaust 09-1612 Exhaust Pipe EVO R Slip On

  • High-temp black thermal coated oval shaped aluminum muffler. TIG welded reinforced muffler bracket.
  • 304 stainless steel mid pipe/ head pipe. Black powder coated stainless steel end tip. Much lighter than stock exhaust.
  • Massive horsepower and torque gains. Sleek muffler design allows for maximum clearance. Vortex Quiet Insert included.
  • Removable screen-type USFS approved spark arrestor. Handmade in the USA. 1 Year Limited Manufacturers Warranty.
  • Removable screen-type USFS approved spark arrestor. Handmade in the USA. 1 Year Limited Manufacturers Warranty...
Check Stock

Everflow Supplies HR-AA-14COMP-NL Compression Tee Hammer Arrestor 1/4" OD Copper

  • SHOCK PREVENTION: stops pipe banging noise common in the plumbing system.
  • REDUCE STRAIN: mini water hammer arrestor reduces the pressure on plumbing system joints.
  • EASY INSTALL: installation of hammer arrestor only requires simple tools.
  • FLEXIBLE: can be installed horizontally or vertically, either way.
  • TEE CONNECTIONS: 1/4” OD x 1/4” Female OD Type AA.
Check Stock