Clevite TW-473S Engine Crankshaft Thrust Washer Set
Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
Detroit Axle - 2WD Only 6-Lug Front Wheel Bearing Hub Assembly for - 2WD Only 2000-2006 Silverado 1500, Sierra 1500, Yukon No Denali or Z71 - Driver Passenger
Front Wheel Bearing Hub Assembly 6-lug 2-pc Set For 2WD/RWD Models Only! This Front End Service Kit Contains A Front Left Wheel Hub, Front Right Wheel Hub, And Front Wheel Bearings To Complete A Wheel Bearing Hub Assembly Front Kit. This Wheel Hub Kit Is Also Known As A Front Wheel Assembly, Wheel Hubs Assembly, Front Assembly, Front Hub Bearing Assembly, Left Front Hub Assembly, Wheelbearing And Hub Assembly, Wheel Hub Assemblies, Wheel Hub Front, And A Front Hub Bearing Assembly Pair..
Mssoomm 25mm HGW25 CNC Square Linear Guide Rail Kit 2Pcs HGW25-116.14 inch / 2950mm +4Pcs HGW25 - CA Flange Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project
HGW25 linear guide rail set includes 2Pcs HGW HGR25-2950mm（116.14 inch）linear guide rail and 4Pcs HGW25CA flange type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGH 25 linear rail kit.
The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
The flange square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGW-HA, HGH-HA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you....
OrangeA Linear Rail 2X HGH 20-1500mm Linear Slide Rail + 4X Pillow Block Carriage Bearing Block Linear Guideway Rail for Automated Machines and Equipments
Complete Linear Rail Kits: This linear rail set includes 2pcs 59 in / 1500 mm long HGH20 rail shafts and 4pcs bearing pillow blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing..
High-Quality Steel Material: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable.EEL MATERIAL】- Linear bearing rails made of quality bearing steel. Beautiful and anti-rust surface treatment ensures durability, high hardness, and stiffness..
Premier Linear Guiding System: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
Easy to Install: Conveniently install the linear rail by aligning the track with the mouth of the slide rail and pushing the slide rail until the slide rail completely falls. It's no need for maintenance..
Wide Application: The linear guide rail is widely used in automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for....
【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
Repeat action until the bearing or bushing has been removed.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Southwest Wheel 7,000 lbs Trailer Axle Electric Brake Kit
Pair of 12" x 2" 8-6.5" bolt circle TruRyde hub and drums 25580 inner bearing 14125A outer bearing.
Pair of 12" x 2" TruRyde electric backing plates.
Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
Comes with TruRyde bearings, 2.25" ID seals, 2.125" ID seals, lug nuts, solid grease caps, ez lube grease caps, cotter pins, spindle washers, tang....
ECCPP 513121 Wheel Bearing Hub Front Wheel Hub and Bearing Assembly Allure, Aurora, Bonnevile, Century, Impala 5 Lug W/ABS
...ize: M10x1.25, Flange Offset: 2.007 In..
VEHICLE COMPATIBLE - Hub assembly fits for 1997-2001 Chevy Venture 2004-2005 Pontiac Bonneville 1997-2003 Pontiac Grand Prix 2000-2003 Pontiac Bonneville 2003-2005 Pontiac Montana 2002 Pontiac Montana 1999-2001 Pontiac Montana 1997-1998 Pontiac Trans Sport.
MAIN FUNCTION - Hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. High quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protective coating that helps prevent rust and corrosion and makes it easier to disassemble and properly twist the wheel nuts.
SERVICE WARRANTY - 1 year warranty, support replace, return and refund service.
Autoround 515042 Front Wheel Hub and Bearing Assembly Fit for 2003-2006 Ford Expedition, Lincoln Navigator, 2WD
COMPATIBILITY - 515042 Wheel Hub Assembly compatible with 2003-2006 Ford Expedition, 2003-2006 Lincoln Navigator.
FEATURES - 2WD Models Only, Flange Diameter:7.2 IN, Flange Offset:1.8 IN, Bolt Circle Diameter:5.31 IN, Replaces parts: BR930457 SP550206.
QUALITY - Autoround Wheel Bearing and Hub Assemblies has been quality tested to meet or exceed OEM performance standards.
INSTALLATION - Assembling has excellent performance, precise overall structure, easy and quick installation.
SERVICE&WARRANTY - Support replace, return, refund service and 1 year warranty. Please Feel Free to contact “Autoround customer service” if you need any assistance.
5 pairs 22 inch soft close drawer slides, Mounting screws included. Attention: the mounting brackets are not included..
Made from high-grade cold rolled steel that is zinc plated. Surface prevent rust. Three-section drawer slide offer Load-bearing 110LB..
spring damping design, the drawer can be closed silently and smoothly. automatic closing performance! Steel ball-bearing action that offer less noise....
Side mounted Steel ball-bearing action, non handed close design, active stop, Internal rail separation is simple and easy to install and remove....
Before purchasing, please measure the depth of your cabinet and select the correct drawer slides. VESLA HOME soft close drawer slide stay by a....
