Best Flanged Spigot

1 Pcs Led Light Bulb 0.50 Watt LED6MFWW-DC Midget Flanged Base Bulb | #AA70RK

  • You Purchasing 1 Pcs Led Light Bulb 0.50 Watt LED6MFWW-DC Midget Flanged Base Bulb.
  • Voltage: 6V, Current: 80mA, Wattage: 0.50W, Type: T-1 3/4 (5mm) LED.
  • Light Output: 500 mcd, Base Type: Midget Flanged Base, Life Hours: 100,000.
  • Dimensions: 15.3mm Length x 5mm Diameter, Viewing Angle: 120 Degree, Color Emitted: Warm White.
Check Stock

1 Pcs Replacement Lamp Bulb 0.50W Midget Flanged Base LED28MFR-DC - EOV49 | #YY2R

  • You will receive 1 Pcs Replacement Lamp Bulb 0.50W Midget Flanged Base LED28MFR-DC.
  • Voltage: 28V, Current: 20mA, Wattage: 0.50W, Type: T-1 3/4 (5mm) LED.
  • Light Output: 500 mcd, Base Type: Midget Flanged Base, Life Hours: 100,000.
  • Dimensions: 15.3mm Length x 5mm Diameter, Viewing Angle: 120 Degree, Color Emitted: Red.
Check Stock

Sintron 15 Amp Flanged Inlet 125V, NEMA 5-15P Shore Power Inlet Receptacle, Generator AC Port Electric Plug 1875W, Weatherproof Cover Recessed Male Outlet, ETL Listed, Straight Blade 2 Pole 3 Wire

  • ✅【CERTIFICATION: ETL】ETL listed. Safety and quality are highly valued at Sintron products, the Sintron 15 Amp flanged inlet receptacle is compliance to North American safety standards..
  • ✅【WIDE APPLICATION】This shore power plug widely used in RVs, campers, cars, trailers, boats, ships, marine heaters, houses, bumpers, embedded socket boxes, etc., not only as generators or battery charger plugs, but also for power your electronic devices..
  • ✅【WEATHERPROOF】Built to withstand harsh environments for the straight blade power inlet has a NEMA Type-3R enclosure rating ensuring superior protection against rain, sleet and damage from external ice formations..
  • ✅【RELIABLE & DURABLE】Sintron's commercial/industrial grade flanged wiring device with nylon dead-front construction and thermoplastic wiring module is available in 15A version and feature heavy duty construction for many years of service life..
  • ✅【EASY TO INSTALL】2" hole size, clear see-thru wiring block (Black-Hot, Green-Ground, Silver-Neutral), and 4 free Stainless Steel screws to help you more firmly fix straight blade flanged inlet receptacle on the hole or wall fast..
Check Stock

15 Amp Flanged Inlet, TOVEN 125V RV Shore Power Inlet NEMA 5-15 Plug RV Receptacle with Waterproof Cover Marine Electrical 15A Cord Cover Power Inlet, ETL Approved

  • 【15 Amp Flanged Inlet】: This NEMA 5-15 15 amp inlet 125V is ETL certified, The material is premium copper and black nylon plastic. None oxidation for the copper pole on the plug. It can avoid ultraviolet degradation and Rain erosion. It is very sturdy and durable, which can work perfectly both indoor and outdoor.
  • 【 Weatherproof Design】: Our 15 amp inlet is ETL approved, which has the saftest quality. The newest weatherproof design back cover will protect it from rainstorms, snow, dust and even works well without crack and leak in the cold winters..
  • 【Easy Installation】: The flanged power inlet needs 1-3 / 4" hole size, use 4 stainless steel screws (package Include) to firmly fix the straight blade flange entrance on the wall..
  • 【The Wire Up As You Wish】: Choose the length and diameter of the cord based on your need. The Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires suitable for No. 12-3 through No. 18-3 cords grip..
  • 【Widely Compatible】: This shore power inlet Is a generator or battery charger plug to energize your several electrical devices and electrical appliances at the same time. Widely used in the RV, trailer, camper, car, boat, marine, block heater, home, recessed outlet box, etc.
Check Stock

WodsWod Beverage Dispenser Replacement Spigot Fits 16mm(5/8 inch)Opening, Stainless Steel Polished Finished, Water Dispenser Replacement Faucet, fits Berkey and other Gravity Filter systems

  • Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
  • Multi-Function – The WodsWod Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Stainless Steel models. Will not fit Berkey Light..
  • Premium Quality –The WodsWod Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
  • Notice – Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
  • Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our WodsWod Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willin....
Check Stock

Push Style Spigots for Beverage Dispenser Carafes (2-Pack), Replacement Lever Pour Spouts for Beverage Dispenser, Chrome Design Lock Open Style

  • ELEGANT & AFFORDABLE: With an attractive chrome exterior and sturdy plastic interior, these are both economical and attractive..
  • VALUE 2-PACK: Receive two push style spigots. Ideal for upgrading multiple beverage dispensers or having one and a spare. Use for your favorite water crock too..
  • FOOD SAFE: Made of high quality food safe plastic and silicone..
  • ALL NECESSARY HARDWARE INCLUDED: Each easy to install spigot set comes with spout / spigot, rubber gaskets AKA washers, and plastic nut to seal tightly..
  • LOCK OPEN LEVER: Push up and this spigot will stay open for hands-free dispensing.
Check Stock

Leisure RV 125/250V 50 AMP Power Plug Twist Lock Inlet with 3 Stainless Steel Pins, White or Black (White)

  • Leisure Cords Quickly Locks The Cord Set To The Inlet - UV stabilized glass-filled polyester,ETL Approved.
  • 50 AMP, 125/250V, 3 Poles, 4 Wires, Flanged Inlet,RV Marine Shore Power Inlet.
  • Corrosion resistant materials and perfect for water-proof.
  • Heavy-duty construction,Flanged Inlet, Nonmetallic Inlet.
  • 3 1/4" Wide X 3 3/4" high - Cutout 2 1/2" NEMA SS-2 / 50AS 125/250V locking.
Check Stock

1 Pcs Led Light Bulb 0.50 Watt T-1 3/4 LED12MFWW-DC Midget Flanged Base Lamp | #AA70RK

  • You Purchasing 1 Pcs Led Light Bulb 0.50 Watt T-1 3/4 LED12MFWW-DC Midget Flanged Base Lamp.
  • Voltage: 12V, Current: 50mA, Wattage: 0.50W, Type: T-1 3/4 (5mm) LED.
  • Light Output: 500 mcd, Base Type: Midget Flanged Base, Life Hours: 100,000.
  • Dimensions: 15.3mm Length x 5mm Diameter, Viewing Angle: 120 Degree, Color Emitted: Warm White.
Check Stock

Mudder PVC Spigot Rain Barrel Faucet Kit 3/4 Inch PVC Rain Barrel Valve with Bulkhead Fitting and Hose Adapter, Rain Barrel Garden Spigot Kit for Aquariums Water Tanks Pools (Black with Dark Green)

  • What you receive: 1 piece 3/4 inch PVC ball valve ,1 piece 3/4 inch PVC bulkhead fitting and 1 piece 3/4 inch PVC hose adapter are included in the garden spigot kit, practical tools for daily life.
  • Dimension: the rain barrel spigot kit measures approx. 3/4 inch.
  • The rain barrel spigot kit is made of PVC material , not easy to fade, break and peel, durable PVC material and sturdy construction make it to serve you for long time.
  • Easily installation: just drill 1.6 inch hole to install bulkhead fitting adapter with durable silicon seal gasket that will seal the water tight, you can finish the installation quickly.
  • Practical design: the PVC spigot rain barre faucet kit is able to fast and easy to empty your rain barrel water into a watering can versus a slow garden hose.
  • Sturdy structure allows it to be applied for all seasons and different weather situations.
  • Suitable applications: the bulkhead fitting adapter with 4 mm thick durable silicone seal gasket that will contour to the shape of the round barrel plumbing, suitable for aquariums, reef tank, irrigation, swimming pools, water pa....
Check Stock

M10-1.5 x 50mm Flanged Hex Head Bolts Flange Hexagon Screws, Stainless Steel 18-8 (304), Plain Finish, DIN 6921, 5 PCS

  • High quality Grade A2-70 Stainless Steel 18-8 (304) provides strength and offers good corrosion resistance in many environments..
  • Flange bolts have a flange on the bottom of the head that distributes the load like a washer..
  • Thread Diameter 10 mm, Thread Size 1.5 mm (M10), Screw Length 50 mm..
  • Flanged Bolts are great to have around for use in wood and wet environments..
Check Stock