SAFELIFE Brass Air Chuck Closed Flow Tire Chuck Heavy Duty Lock on Tire Inflator Chuck with Clip
【Closed Flow】 Closed flow, with shut-off valve inside, air only passed through when the air chuck is engaged with a tire valve..
【Heavy Duty】 Upgraded heavy duty brass air chuck make it easier locking onto stem valves - no air leakage ever since..
【Lock on Clip】 When use the air chuck to inflate a tire or measure pressure, please use the lock-on clip to secure the chuck to the valve stem for sealing..
【Fitment Type】 1/4" female NPT, compatible with most tire inflator, wheel pressure gauge and compressor. Straight chuck tip is suitable for all vehicles..
【Satisfaction guarantee】 30-day money-back guarantee for any reason, 12-month warranty for quality-related issues..
TRADESAFE Professional Lockout Tagout Kit - Loto Locks, Gate Valve Lock, Ball Valve Lockout, Circuit Breaker Locks, Hasps, Plug Lock, Cable Lockout, Tag Out Tags and Ties Set (1 Key Per Lock)
OSHA Compliant LOTO Kit - Professional lockout kit with (25) versatile lock out tag out devices.
stored in a vibrant, tear-resistant polyester canvas carrying bag, developed and tested to ensure proper control of hazardous energy.
mistcooling System - Stainless Steel Tubing - 1500 PSI Misting Pump - Do It Yourself Misting System - for Residential, Commercial and Industrial - Up to 120 Nozzles (18 Ft Mist Line - 10 Nozzles)
1500 PSI Misting Pump with Stainless Steel Tubing, Stainless Steel Nozzles. Do it Yourself Misting System, easy to Install , comes with all parts. For Residential. Commercial and Industrial Misting Applications.
Base 10 Nozzle Mist Kit Includes: 1 - 1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5 micron filtration, Outdoor Rust Proof Enclosure with on/off Switch 18ft Stainless Steel tubing for push lock (Pre-cut 2ft sections), 22ft UV coated Flexible 1/4" feed line, 10- Nickel Plated Push Lock Misting Tees, 10- Stainless Steel Orifice Misting Nozzles (0.006"), 2- Nozzle plugs, 1 - Push Lock End Plug.
1500 PSI Pump Features :Inbuilt Filtration, Direct Drive, With Solenoid, Pressure Switch, No Water Cut off Switch, With By-Pass Valve, 50-60 DB, TEFC Motor , 110 V AC.
Easy to Customize, Easy to Install, Do it Yourself Misting, With Push Lok Fittings for Ease of Re-Use.
2 Ft Stainless Steel Tubing Pieces with Grooves makes it easy to use the System for Industrial Applications..
WELLUCK 15 Amp Flanged Inlet 125V, NEMA 5-15 RV Shore Power Inlet Plug w/Waterproof and Back Cover, 2 Pole 3-Wire AC Port Plug, Generator Male Receptacle for Marine Boat RV Shed Electrical Extension
【15 Amp Flanged Inlet】: No oxidation for the Nickel coated copper pole on the plug, made of premium copper and Nylon plastic to avoid the damage of UV degradation and chemicals, rugged and durable for indoor and outdoor..
【Easy Reliable Installation】: 2" Hole size required, clear see-thru wiring block (Black-Hot, Green-Ground, Silver-Neutral), and 4 long Stainless Steel screws will fix straight blade flanged inlet on the hole or wall more tightly. No gap on the edge!.
【 Weatherproof Cover】: ETL approved, and the flanged power inlet cap and back cover will protect it from the rain storm, snows, dust and even works well in Western Colorado winters, without crack and leak..
【Wire Up As You Wish】 : Define the Length and Diameter of the cord based on actual need. Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires, suitable for No. 12-3 through No. 18-3 cords grip..
【Widely Compatible】: As a generator or battery charger plug to energize your electrical devices. Widely used in trailer, camper, RV, car, boat, marine, block heater,home, bumper, recessed outlet box, etc.
TMCRAFT 1.6 Gallon Mini Ball Lock Keg, Stainless Steel Double Ball Lock Post Corny Keg with Quick Disconnect Set for Home-brewing
STAINLESS STEEL: This corny keg is constructed with food grade stainless steel which keeps beer fresh for few months, and the high-strength stainless steel can withstand higher co2 pressure..
PORTABLE: 1.6 Gallon capacity can be stored and taken anywhere. Measures 8.9"L x 8.9"W x 11.1"H. Dual metal handle contribute to carry. Also easily stackable once disconnects have been attached..
BALL LOCK SYSTEM: Double ball lock post design allows this corny keg to connect ball lock quick disconnect set, allows easily carbonate home-brew and more options of extra functions for your kegging system (2 quick ball lock disconnect set included)..
RELIEF VALVE: Ball lock mini keg equipped with relief valve allows you to control the pressure in the keg through pulling on the pressure-relieving ring for a couple seconds..
ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..
250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
