This Kuryakyn part is most compatible with Harley: '14-'19 Electra Glides, Road Glides (except '19 FLTRXSE), Road Kings & Street Glides (except '15-'19 FLHXSE).
Will not fit with accessory Saddlebag Guard Rails P/N 90200561.
NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit
REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
YIYEIE Flare Nut Wrench Set, Metric 5-Piece, Brake Line Wrench Set 9, 10, 11, 12, 13, 14, 15, 17, 19, 21 mm, CR-V Steel, with Roll-up Pouch
Must-have for Mechanics: Flare nut wrenches, also named line wrenches, are widely used working on brake/fuel lines, steering, and refrigeration lines. Great to carry in your toolbox..
High Quality: Crafted from high-strength Chrome Vanadium Steel, heat-treated, drop forged, fully polished. Exceeds ANSI standard..
Durable for Last: Mirror chrome finish is shiny, easy-to-clean, corrosion and rust-resistant. Extends wrench service life effectively..
Tight Grip, Great Fit: Hex-shaped open-end heads have a good grip on five sides of fasteners, giving more points of contact on nuts, providing less slippage and rounding than traditional wrenches..
15° Offset: The wrenches are slightly angled with a 15 degree, to provide knuckle clearance, make it possible to reach tighter places. Meets different applications, and makes your work easier..
Metric Size, 5-Piece: All wrenches are marked well with the size on both sides, maximizing efficiency with less carry. Wrench set includes the most popular sizes used for repair: 9mm x 11mm, 10mm x 12mm, 13mm x 14mm, 15mm x 17mm, 19mm x 21mm.
Carrying Pouch: The rolling pouch allows for easy organization, storage, and carrying out. Size markings on the pouch allow for easy identification, taking out, and storage..
Spurtar Lug Wrench Extendable Wheel Brace Lugs Wrench Tyre Repair Kit Wheel Nut Remover Torque Wrench 1/2 Drive with 17/19mm and 21/23mm Sockets Storage Canvas Pouch for Car, Van, Truck, Caravan
ERGONOMIC & SUPER STRONG: Telescopic extendable wheel Torque Wrench is made of super-strong chrome carbon steel which can extend from 350mm up to 550mm for more convenient use.
COMPACT SOLUTION: Locking wheel nut removal tool torque wrench set with 2 double-ended sockets (17/19MM) & (21/23MM) made from chrome vanadium can cover almost 98% of all vehicle types.
SAFE & FAST: High-torque telescopic extending car wheel nut wrench easily undoes or fixes wheel nuts. Car tyre repair kit fitted with durable toughened non-slip rubber handle for extra comfort grip.
AT-A-GLANCE: Features space-saving telescoping design, our car wheel wrench locking wheel nut remover comes in a canvas pouch with velcro closure for easy storage and portable convenience.
Spurtar extendable telescopic tyre wrench wheel brace for car is ideal for professional use or just as a compact solution to keep in your car in case of emergencies.
LPHUMEX Fuel Pump Removal Tool - Fuel Pump Lock Ring Tool, Fuel Tank Repair Kit, Fuel Tank Lid Cover Remove Spanner, 3/8' to 1/2' Adjustable Lock Ring Spanner
Universal: This Fuel Pump Module Spanner Wrench fits most plastic retaining rings, Compatible with all vehicles that have silent fuel tank lid, adjustable from 3/8" to 1/2" (38mm to 168mm) ratchet drives..
Applications: Suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank..
Easy Handle: Anyone who needs to remove a ring nut to change out or install a fuel pump, replace fuel sending unit, change the fuel filter etc. MUST have this wrench!! Gets the job done quickly!! Zero damage to the plastic ring nut with this wrench and it's totally adjustable to fit whatever size ring nut possible!!.
Work with: All that is needed is a 12mm wrench to set the width of the arms and a 3/8" drive ratchet with extension. Perfect though. Way better then a screw driver and hammer (that didn't work).Make sure you tighten the two small bolts before use. The wrench easily engages in the ridges around a threaded locking collar that secures the fuel pump to the top of the tank..
You can use on all kind of vehicle with slient fuel tank lid..
TOOLEAGUE Magnetic Nut Driver Set for Impact Drill Cr-V Steel 1/4\ Quick-Change Hex Shank 17 Piece Metric/SAE Screwdriver with Storage Bag
High Quality: The impact driver bit is made of Cr-V steel, which has higher shock resistance and hardness. The surface is blackened by manganese phosphate, which has the ability to resist wear, oxidation and corrosion..
STRONG MAGNETIC FORCE: The drill sockets powerful magnetizer design can strengthen the safety lock and hold of the drill bit during the application of nut and bolt fasteners. Each magnet is tightly installed, and the magnet is not allowed to fall..
POWER NUT DRIVER BITS: metric magnetic nut driver set, metric: 6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm. SAE: 1/4″,11/32″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″,( 1pc of each), Each mounter size is clearly engraved on the side for easy identification.Also includes 3 Pcs drill extension rods..
QUICK-CHANGE: The nut setter master set is suitable for quick chucks and any drill or driver, electric screwdriver, socket wrench, pneumatic impact wrench, cordless electric drill, screw gun, etc..
PACKAGE CONTENT:The Nut Driver Socket with a storage bag, which is convenient for storage and carrying. It is widely used in household DIY, auto parts, woodworking, professional machine repair, etc..
BULLTOOLS Extra Long Double Box End Wrench Set Chrome Vanadium Steel Aviation Wrenches Metric 8-24mm with Organizer Box (8-Piece)
【12-POINT BOX END】12-Point thickening head, working radian only 15 degrees, easy to work in narrow places. Grasp more firmly, effectively prevent the nut from sliding and protect the nut..
【EXTRA LONG DESIGN】The unique ultra-long design makes the wrench longer than other wrenches provides better leverage performance, making your work easier and more labor-saving than other box wrenches on the market.Speed up your work..
【HIGH QUALITY MATERIAL】Mirror polished wrench set is made of heat-treated chromium-vanadium steel with good toughness. Chromium-plated surface,waterproof and rust-proof,anti-corrosion. Aerospace grade chromium-vanadium alloys are stronger,corrosion resistant and have a longer service life..
【WIDELY USE】The specifications are comprehensive and more versatile. Suitable for equipment installation, bicycle, electric vehicle, automobile maintenance, etc..
【WITH Organizer Box】This Aviation wrench set comes with a storage box that allows you to quickly identify the wrench you need.Convenient storage and carry. 8-Piece metric: 8x9mm, 10x12mm 11X13mm, 14x15mm, 16x18mm, 17X19mm,20-21mm,22-24mm..
Vector Tools ISO/Bubble Flaring Tool Kit, 9 Piece | Includes Blow-Molded Case W/Mini Pipe Cutter
Make your own brake lines with the bubble Flaring I.S.O tool Kit, designed for metric soft steel brake lines requiring an “ISO” or bubble style flare.
Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm, 10mm.
ISO/Bubble Flaring Tool Kit designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
