Best Flat Tube Brazing Type

Hot Max 24184 Aluminum Brazing Flux for Welding

  • Formulated specifically for torch brazing aluminum.
  • Normally used with 4047, 4043, or 1100 brazing filler alloy.
  • Can also be used for furnace and automatic flame brazing operations.
Check Stock

Lucas-Milhaupt 99088 Flux Cored Aluminum 822

Check Stock

J.W. Harris Company 40022 Stay-Silv White Brazing Flux

  • It is a powder flux formulated for brazing gold and silver..
  • Jar of welding powder brazing flux powder welding cast consumables jewelry weld repair supply.
  • There are 250 grams in this jar, which will definitely meet your needs..
  • The powder melts at 700 degree centigrade.​.
  • Brazing powder improves the weldability of metal in the process of high temperature welding..
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application:The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

1/4 x 1 C110 Copper Flat Bar 12 Long Copper Bus Bar

  • ✿---- This high purity copper flat bar is the ideal choice of DIY enthusiast, good at welding and brazing, you will love it..
  • ✿---- Copper bar is made of 110 copper material, has nice electrical conductivity and good processability, high purity, you can use it according to your requirement..
  • ✿---- Copper bar stock has high strength, high hardness. It can still work well under hot condition and has good corrosion resistance..
  • ✿---- Our coppers flat bar is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
  • ✿---- Widely used in knife making, jewelry, DIY craft making, maintenance, electrical, architectural decoration, washer, milling, lathe, etc..
Check Stock

Supplying Demand 15% Silver Solder Brazing Rods 4 Sticks 19-1/2 Inch Length for HVAC Refrigeration

  • Rod shape is flat. Solidus temp is 1190 and the Liquidus temp is 1475.
Check Stock

6pcs Hex Handle HVAC Tools Air Conditioner Copper Pipe Swaging Tool Round Handle Tube Expander Drill Bit Repairing Set with 1/4, 3/8, 1/2, 5/8, 3/4 Bits

  • Revolutionizing system for molding tubes using heat by friction way more surface of between the flare and the Valv e..
  • When hvac tools air conditioning is installed, expand copper tube, make two copper tube mutual link. (To be installed on hand electric drill.).
  • 7/8", 3/4", 5/8", 1/2", 3/8", 1/4", 6 different sizes per set of your choice to meet your needs.Handle diameter: 7mm (Triangular/Hex Handle).
  • The flares will always have the same size and will fit perfectly.
  • The swages present a perfect depth and a tight fitting, that will make the brazing easier, reducing the fatigue stress over the coupling area..
  • Perfect for installers, no matter if you are just learning or have been doing it..
Check Stock

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

  • Professional contractor grade oxyacetylene welding and brazing outfit.
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Professional Portable Oxygen Acetylene Oxy Welding Cutting Torch Kit W/Gas Tank Torch Cutting and Welding Portable Kit

  • General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc..
  • Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming..
  • Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene.
  • Regulator Type - Rear entry regulators for better balance on the small cylinders Oxygen Regulator Type: (CGA540) Acetylene regulator Type: (CGA200)..
  • Complete Set - Compatible gas-welding accessory kit includes a 20cu. ft oxygen tank and 10cu. ft acetylene tank with regulators, along with full brass torch assembly..
Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock