TKKEUEP Gasoline Fuel Filler Neck Hose with 4 Hose Clamps,1 1/2 inches Inside Diameter Fuel Filler Hose, Reinforced Gas tank filler hose
Reinforced Fuel Filler Hose: This is good quality reinforced hose with the nylon cording inside for added strength.
Proper Fuel Filler Hose:Temperature Range: -40 Deg. F to +212 Deg. F (-40 Deg. C to +100 Deg. C).
Up to maximum concentrations allowed by the EPA.
Plenty Long Enough：Provided the length required for the extension from the tank to the filler cap；15 7/8" Long x 1 1/2" Inside diameter fuel filler neck hose（measure your old item to assist with the new one）.
Easy to Install:You can easy cut this gas line fuel filler neck hose to fit your purpose(Very flexible and easy to cut with box knife).
Applicable :Suitable for use with fuel line, fuel hose, fuel filler neck vent hose.
JoyTube Brass Hose Barb Fitting Metals Splicer Mender 1/4 Barb Hose Union Fuel Gas Water Air Pack of 12
Connections: 1/4” to 1/4”. Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart. Our barb union will provide good seal when you use it to connect hose..
Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) ..
Connects to a hose on both ends. Union coupling for connecting two hoses with the same diameter in a straight run..
Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include)..
MCAMPAS 10 Feet 1/2 ID Natural Gas Quick Connect Hose and Regulator Replacement for Kitchen-Aid 710-0003 Gas Grill Conversion Kit,Convert 4-Burner Cabinet Style Gas Grill to Natural Gas
Natural gas hose and regulator for Kitchenaid gas grill conversion connection kit includes 10-foot length 1/2 inch ID natural gas hose with quick....
10 feet 1/2" ID gas quick connect hose with 1/2" male quick plug, 3/4-16 UNF female flare fitting on the other side.
5.9" manifold gas regulator hose kit - 1/2 PSI（3.5 Kpa) natural gas regulator valve. Can be switched manually natural Gas Or Propane gas regulator....
Compatible with converts these kitchenaid grill models to natural Gas: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A,....
Used to convert the home's natural gas pipeline or large LP gas Gas tank cylinder quick connection to existing low pressure supply gas grill....
Simpson Cleaning 40225 Morflex Series 3700 PSI Pressure Washer Hose, Cold Water Use, 5/16 Inch by 25 Feet, Natural
Cold Water Compatible: The MorFlex series pressure washer hose is built for water temperatures up to 140 degrees Fahrenheit.
it's great for any residential or commercial needs to clean surfaces, such as patios, decks, sidings, vehicles, and more.
Easy Connections: This hose includes industry standard M22 threaded hose connections, and can be used with pressure washers up to 3700 PSI.
can be used as a replacement for your original hose or, with the included adapter, as an extension to your existing hose.
Works with Most Pressure Washers: This MorFlex hose is equipped with industry standard M22 threaded connections with a dual o-ring design to fit most gas and electric pressure washers.
Quality Construction: MorFlex technology results in a highly flexible and kink resistant hose.
the lightweight polyester braid makes for easy handling, and the polyurethane outer jacket is non-marring and abrasion-resistant for improved durability.
Durability and Long Life: The 4-inch bend protectors at each end of the hose help extend the life of the accessory.
TERA PUMP TRFA01 4-AA Battery Powered Fuel Transfer Pump w/ Flexible Intake hose and No-spill Auto-Stop Nozzle, attachable to gas cans and more
... Gasoline, diesel, kerosene, light oils & non-potable water- Discharge Hose of 39-inch ( 3.25ft ) for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle | Three (3) Gas Can Adapters includes, Fits most North American gas cans.
[ FLEXIBLE SUCTION TUBE ] Suction Tube length of about 18-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can & up to Jerry Cans - Suction end Outer Diameter: 1.2-inch - Back Saving: Lifting heavy gas cans will be a thing of the past.
[ BATTERY POWERED ] Powered with Four (AA) Batteries, Sold Separately or in Emergency situations operate with Two (AA) batteries during emergencies - Water-Resistant power buttons protects against accidental splashes - Works great with farm equipment, Industrial Vehicles and in Automotive Shops.
[ MANUFACTURER WARRANTY ] TERA PUMP has been manufacturing reliable pumps for 10 Years and back their product with a 1-Year Warranty on Manufacturer Defects - CSA Certified for safe gasoline transfer per ANSI, UL, CSA and NSF standards - Replacement Motor Cap, battery cover, gas can adapters (Sold Separately).
iPower 6 Inch Adjustable 304 Stainless Steel Duct Hose Clamps for Ducting Ventilation, Pipe, Heating and Cooling, Worm Drive, 4 Pcs
Adjustable diameter: Fit for hose outside diameter 5.75-6.46 inch. Hose clamps are flexible and ductile with wide adjustable size range from 146-164mm. Package includes: 4 Pcs 6" hose clamps..
Easy to use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly..
Prevent leakage: Firm locking head and belt holes can lock the hose very firmly, effectively solves the problem of liquid and gas leakage of the hose. Make your use of the hose safer..
Premium high quality: Made in 304 stainless steel with worm drive lock. Provide strong performance in anti-corrosion, waterproofing, rust-resistance, durability and long life-cycles..
Wide application: Clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, household etc..
iPower 10 Inch Adjustable 304 Stainless Steel Duct Hose Clamps for Ducting Ventilation, Pipe, Heating and Cooling, Worm Drive, 8 Pcs
Adjustable diameter: Fit for hose outside diameter 9.69-10.39 inch. Hose clamps are flexible and ductile with wide adjustable size range from 246-264mm. Package includes: 8 Pcs 10" hose clamps..
Easy to use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly..
Prevent leakage: Firm locking head and belt holes can lock the hose very firmly, effectively solves the problem of liquid and gas leakage of the hose. Make your use of the hose safer..
Premium high quality: Made in 304 stainless steel with worm drive lock. Provide strong performance in anti-corrosion, waterproofing, rust-resistance, durability and long life-cycles..
Wide application: Clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, household etc..
Kegerator CO2 Gas Line Beer Hose Beer Gas Line 5/16 Red Gas Line 3/16 Beer Line with Hose Clamp for Home Brewing Beer Tower Beer Keg Kegging by PERA
1.Include: 5ft Clear Beer Hose ID 3/16" OD 7/16", 5ft Red Gas Hose ID 5/16" OD 9/16", two pcs 8-12mm Hose Clamps and two pcs 10-16mm Hose clamps.
2.Material: PVC Material for Beer Gas Line and Stainless Steel for Worm Clamps.
3.Future: 1/4" Wall thickness of The Gas hose can endure a higher pressures of a draft system. The Beer tube can resistant most alkali, alcohol, and mild acids and chemicals. Worm Clamps will confirm no leak problem during the connection.
4.Widely Use: The Beer Tube usually connect Beer Tower, Beer Keg, Beer Kegerator and the Gas Tube usually Connect Gas Regulator, Gas Manifold, Tank. This set will complete your Home Brewing Beer Keg System.
5.Guarantee: Quality Guarantee, any problem for Beer Gas Line with Worm Clamps, Money Back or Replacement free..
