Best Flexible Steel Conduit

Gardner Bender GCC-410 2-Hole Heavy Duty Conduit Strap, 1.66 in, Plastic, Gray, 1-1/4\

  • Secures and supports Rigid and EMT conduit.
  • Trade size #3 for 1-1/2-in EMT or 1-1/4-in Rigid conduit.
Check Stock

IDEAL Electrical 31-057 Blue Steel Fish Tape – 240 ft. Blued Steel Fish Tape w/ Formed Hook & Tuff-Grip Pro Case, Non-Oily Finish, Laser Etched Increments

  • Pulling Tape: designed to assist in heavy-duty electrical applications, this tape is a reliable tool for electricians for longer conduit runs. It is laser etched in an increment of 12 in. to provide an instant conduit length for routing the wire in the electrical setup.
  • Premium Material: the fish tape is made using high-quality of carbon steel that boosts its lifespan, making it reliable for electrical conduit runs.
  • Impact Resistant: The Tuff-Grip Pro case and handle are impact resistant, while the unique design keeps the wire inside the case, even after a long fall..
  • Rust Resistant: the wire puller tape has a non-oily blue finish that makes it resistant to rust and corrosion, ensuring safe and smooth operation.
  • Product Specifications: The Ideal Electrical Conduit Tape with formed hook end and Tuff-Grip Pro case measures 1/8 x 0.060 in. It is available in a standard length of 240 ft. and offers 1,600 lb. of tensile strength.
Check Stock

Klein Tools 56333 Fish Tape, Steel Wire Puller with Double Loop Tip, Optimized Housing and Handle, 1/8-Inch x 120-Foot

  • Durable, high-carbon strength 1/8-Inch wide steel fish tapes are firm yet flexible for long runs and large wire pulls.
  • Case design decreases payout effort and friction by optimizing the tape payout angle.
  • Slip-resistant housing geometry improves winding power and reduces binding.
  • Multi-position handle gives you a firm, steady grip as you pull or rewind tape from the case.
  • Descending laser etched markings in 1-Foot (0.3 m) increments allow you to more accurately measure conduit runs and the amount of tape left to pay out.
  • Protective coating on the steel tape reduces corrosion from non-contact moisture and humidity.
  • Polypropylene case and handle offer high impact resistance.
Check Stock

Klein Tools 80036 Level, Digital Electronic Level and Angle Gauge Tool Kit with Plumbers Straps, Programmable Angles, Magnetic Base, 2-Piece

  • DIGITAL LEVEL MEASURES 0-90 Degree, 0-180 Degree, or dual axis bullseye ranges.
  • PRE-PROGRAMMED TARGET PITCHES: 1/8-Inch, 1/4-Inch, 3/8-Inch and 1/2-Inch per foot.
  • AUDIBLE ALARM sounds when target angle is achieved.
  • BULLSEYE ORIENTATION accurately determines X- and Y-axis.
  • DISPLAY AUTO-ROTATES when used in horizontal or vertical orientation.
  • PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
  • FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.
Check Stock

IDEAL Electrical 31-06 Stainless Steel Fish Tape – 240 ft. Stainless Steel Fish Tape w/ Formed Hook & Tuff-Grip Pro Case, Non-Oily Finish, Laser Etched Increments

  • Pulling Tape: designed to assist in heavy-duty electrical applications, this tape is a reliable tool for longer conduit runs. It is laser etched in an increments of 12 in. to provide an instant conduit length for routing the wire in the electrical setup.
  • Premium Material: the fish tape is made using high-quality of stainless steel that is resistant to rust and corrosion. This boosts the lifespan of the tape, making it reliable for electrical conduit runs.
  • Impact Resistant: the wire puller tape has a finish that makes it resistant to rust and corrosion. It ensures smooth operation, making it a safe tool for routing the wires abrasive electrical environments.
  • Ergonomic Design: the replacement fish tape is carefully designed to keep the wires holstered within the case after a long fall. It is straight and stiff that maximize user convenience during the work.
  • Product Specifications: the Ideal Electrical Conduit Tape with formed hook end and Tuff-Grip Pro case measures 1/8 x 0.060 in. It is available in a standard length of 240 ft. and offers 1,600 lb. of tensile strength.
Check Stock

Klein Tools 56334 Fish Tape, Steel Wire Puller with Double Loop Tip, Optimized Housing and Handle, For Heavy Duty Wire Pulls

  • Durable, high-carbon strength 1/8-Inch wide steel fish tapes are firm yet flexible for long runs and large wire pulls.
  • Case design decreases payout effort and friction by optimizing the tape payout angle.
  • slip-resistant geometry improves winding power and reduces binding.
  • Multi-position handle gives you a firm, steady grip as you pull or rewind tape from the case.
  • Descending laser etched markings in 1-Foot (0.3 m) increments allow you to more accurately measure conduit runs and the amount of tape left to pay out.
  • Protective coating on the steel tape reduces corrosion from non-contact moisture and humidity.
  • Polypropylene case and handle offer high impact resistance.
Check Stock

Woodhead 35970 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 5.00\ Mesh Length, .25–.36\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 5 in. in mesh length and works with 0.36 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35974 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 10.00\ Mesh Length, .75–.99\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.99 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Woodhead 35972 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 8.00\ Mesh Length, .50–.61\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 7 in. in mesh length and works with 0.61 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35973 Pulling Grip, Junior Duty, Flexible Eye, 2800lb Approximate Break Strength, 10.00\ Mesh Length, .62–.74\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.74 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock