Best Float Control Switch

Protech 63010 Refrigerant Recovery Cylinder, 400 psi, 50 lb.

Powder coated cylinder for high gloss, durable finish.
Reusable and conforms to dot-4ba400 specifications and ari guidelines.
3/4" npt opening accepts 80 percent fill float switch shut-off device (does not included the float switch valve, if you need it, please see master cool part # 62011 which includes it).
Pre-charged cylinder provides a clean, dry interior.

【Float Switch Automatically Control】- The pump is automatically ON/OFF controlled by float switch according to water level. It starts at water level 30~50cm and stop at 10~15cm. It can remove water down to 1 cm by manually control..
【Full Stainless Casing and Long Cable Cord】Solid metal casing is resistant to rust. This pump is only works with clean water that contains small solid less than 5mm. Pump also comes with a long 26.2ft cable cord, which allows pump to go deep enough (23ft) in the water..
【Oil-Filled Seal Structure with Thermal Protection】- Oil-filled seal structure gives pump longer duration, which is much longer than regular mechanical seal. Thermal protector ensures that the pump will not be burned out. Even when the pump trigger thermal overload protector, pump will rework after cooling down..
【3/4 HP Power High Efficiency】- Maximum capacity of transferring water up to 3300 GPH with 1.5″ discharge port and hose horizontally, Maximum delivery height is 28ft vertical, 2200 gallons per hour on at 10ft discharge lift..
【GHT 3/4″, NPT1″ and 1.5″ male tread connectors included】- With 1.5″ discharge port will give pump maximum output flow rate. Multiple hose adapters help you to get pump starte....

-Package included : Automatic cow drinking water bowl with 2 float ball valves,meet you daily use and replacement..
The use of float water level floating principle control the inlet and outlet water switch, to achieve a constant water level effect, keeps enough water and always clean water..
- This automatic waterer bowl apply to farm,the water fountain obviously save more than 30% of the water, reduce the sewage farm..
-Smooth edge polished , to avoid traumatic infection the caused by scratching.
-Easy to install：2 holes at the back are convenient to attach this waterer to the wall.

Large floats detect 1/4 in. water level rises, automatically activating the sump pump.
Second float provides additional protection to ensure automatic pump activation.
Protective float switch cage helps keep debris and wires from interfering with float movement.
vented, curved bottom reduces debris build-up under the float.
Allows the sump pump to run for an additional 10 seconds to drain excess water from the sump pit.

1 1/8 inch hose outlet---3.8 amp--12 volt.
Rugged water tight impact resistant housing--stainless shaft--Blocked marine wiring.
All-in one pump & switch-No float switch required-No additional float switch reqired--can be used 3 wire can be used as auto/with switch/or both.

1. The pump has a builtâ€‘in switch, which can automatically control according to the water level, no external float switch is required..
2. With ignition protection function, no need to worry about the unsecure factors when you start it..
3. This shower sump pump systerm has multiple sizes of port connector, easy to operate..
4. Builtâ€‘in check valve, which can prevent dirty water backflow to the bathtub and cabin..
5. Transparent snapâ€‘on cover with gasket seal and removable mesh filter for easy cleaning..

Zoeller Waste-Mate 267 is a heavy-duty submersible sewage, effluent, or dewatering pump with 1/2 HP.
Passes 2" spherical solid waste with plastic impeller.
Float-operated sewage pump with a 2-pole mechanical switch & non-clogging vortex impeller design.
Durable cast engineered construction utilizes ASTM Class 25 cast iron for switch case & pump housing.
Automatic discharge with integral float switch is completely submersible, watertight, & dust-tight.

1. The pump has a builtâ€‘in switch, which can automatically control according to the water level, no external float switch is required..
2. Transparent snapâ€‘on cover with gasket seal and removable mesh filter for easy cleaning..
3. This shower sump pump systerm has multiple sizes of port connector, easy to operate..
4. Builtâ€‘in check valve, which can prevent dirty water backflow to the bathtub and cabin..
5. With ignition protection function, no need to worry about the unsecure factors when you start it..

750 GPH 3/4 Inch Hose Outlet 20 amp 12volt Bilge Pump.
Rugged water tight impact resistant housing Stainlessshaft Blocked Marine Boat wiring.
All in one Bilge Pump & Float Switch No additional float switch required 3 wire can be used as auto with switch or both.

Zoeller Waste-Mate 267 is a heavy-duty submersible sewage, effluent, or dewatering pump with 1/2 HP.
Passes 2" spherical solid waste with plastic impeller.
Float-operated sewage pump with a 2-pole mechanical switch & non-clogging vortex impeller design.
Durable cast engineered construction utilizes ASTM Class 25 cast iron for switch case & pump housing.
Automatic discharge with integral float switch is completely submersible, watertight, & dust-tight.