Best Flow Meter 80

Ancel S3000 EVAP Automotive Smoke Machine Leak Vacuum Diagnostic Tester with Oil Level Gauge & Air Flowmeter for All Vehicle Boat Truck Motorcycle

  • ...bine system, intake manifold, vacuum line, etc..
  • [High performance and high-quality metal structure] Compared to other simple smoke leak diagnostic testers, the ANCEL S3000 smoke machine not only has a built-in air pump, but also has a pressure gauge and an adjustable flow meter. The compressor generates air pressure from 0.8 to 14.5 psi, allowing smoke to be easily introduced into the tested sealing system, speeding up the leak detection process..
  • [Pressure gauge+adjustable flow meter] You can judge whether the tested system has a leak by the pressure change of the pressure gauge. By adjusting the size of the flow meter, you can also better control the amount of visible smoke to locate specific leaks. There are separate air mode and smoke modes to meet your different needs..
  • [Easy operation] A few simple steps can help you detect leaks in the vehicle system. (1) Add tobacco oil (USP mineral oil/baby oil), you need to buy it separately. (2) Check the power cord (12V DC car battery). (3) Connect the system and test for leaks..
Check Stock

Runleader HM009 DC 6V to 80V Round Hour Meter Snap in Quartz Hour Meter Mechanical Timer for Boat Auto ATV Utv Snowmobile Lawn Mower Tractors Vehicle Cars Fork Lifts Trucks Marine Generator

  • Mechanical Round Hour Meter Work Range:AC/DC 6 to 80V.
  • Accumulating Total Running Hours TOT. Max Hours:99999.9H,Resolution 0.1 hour..
  • The hour meter fits in to a 2" round hole and includes an adjustable retrainer clip so that the meter can be mounted on material up to 9/32 inch thick. Meter depth behind the panel is 1.5 inches.
  • 6-digit display,easy to read 7 mm digits.
  • Quartz Hour Meter for Lawn Mower Marine Boat Engine Motocross Marine Motorcycle Snowmobil ATV Boat Generators Tractor.
Check Stock

INGCO Auto Ranging Digital Clamp Meter TRMS 6000 Counts Measures AC/DC Voltage to 600V AC/DC Current to 600A Resistance Capacitance Diode Test Temperature Multimeter

  • WIDE RANGE OF TESTS. INGCO TRMS auto ranging clamp meter meets your different needs for measuring, including AC/DC voltage, AC/DC current, resistance,....
  • EASY TO USE. The backlight changes to orange when volt > 80V or current > 3A with dual readings.
  • Flashing light helps place the probes to correct....
  • PROFESSIONAL MULTIMETER. Automatic range turntable design and NCV non-contact measurement. The low pass filter (LPF) ensures accurate drive output....
  • ALL ON ONE DEVICE. 100mF large capacity. INGCO clamp meter can be used as clamp meter as well as capacitance meter. 100mF equals 100000μF. It's....
  • WORRY-FREE ORDER. If you are not 100% satisfied with our clamp meter, we offer you 90 days refund or replacement. If you have any problem, please....
Check Stock

Argon Co2 Professional Gas Flow Meter Tester Flowmeter peashooter for Mig Tig Welder Welding

  • Professional Ggs Flow Tester / Meter Peashooter Style.
  • Flowmeter tester scaled from 0 - 25 litres per minute in one litre graduations, used for testing the gas flow at the Mig or Tig torch.
  • Simply place the tester over the Mig or Tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases..
  • Designed to check gas flow on Tig or Mig torches..
Check Stock

ANNMETER Pro HVAC Anemometer- Air Flow Velocity Meter AN-826A 0.001~100Mph Wind Speed Gauge,Handheld Wind Tester Measuring Airflow Movement Temp with Max AVG Current

  • 【CFM Anemometer】Built with lightweight vane sensor to ensure sensitivity for accurate air flow measurement, Extendable cable and wand can extend to 79 inches, makes this cfm wind speed meter tester can easily reach to air outlet of AC, Vent..
  • 【Pro Airflow Air Velocity Meter】-Accurately measure wind speed ranging from 0.001~100Mph (+/- 5% of reading), wind temperature from 14~113℉(+/- 1.8℉). 5 wind speed units optional: m/s, Ft/min, Knots, Km/hr, Mph.
  • 【Wide Applications Wind Detector】-Handheld wind indicator not only can be applied in HVAC system installation and checking, dust vent detection, air conditioner maintenance, but also for outdoor activities: hiking, camping, boat sailing, sky surfing, shooting, drone Flying..
  • 【Humanize Designed Anemometer】-For continuous measurement, you can fix the gauge on a tripod with the thread hole at the bottom. Auto/ Manual power off function for battery saving. Backlight LCD provides clear reading in darkness or dim place..
  • 【Must Have One Air Flow Meter】-A solid storage case comes with AN-826A, for easy carrying and protecting damage from transport. Buy with confidence! For product defective or any further problem, ANNMETER provides you unconditional warranty!.
Check Stock

AC Frequency Meter LED Digital Display 20-75 Hz Signal Ac Hz Frequency Indicator Light ST16HZ Round Red White Blue Green Yellow (Blue)

  • MAIN FEATURE---Produce Name: LED Hz Indicator.
  • Applicable: circuit frequency measurement.
  • 20-75Hz MEASUREMENT RANGE---The AC frequency meter is of wide measurement of 20-75Hz.
  • HIGH ACCURACY---The AC frequency meter is of high accuracy of ±2%, helping to provide you reliable data.
  • CLEAR DISPLAY---Made of high quality material, the AC frequency meter is of clear display, exquisite workmanship, long service life, and stable working performance.
  • 5 COLORS---The AC frequency meter is of 5 different colors, red, white, blue, green,yellow, you can choose one according to your preference.
Check Stock

IDEAL INDUSTRIES INC. 61-744 Clamp Meter 600 Amp AC with NCV, Voltage Indicator, CATIII for 600v

  • [Auto-Ranging Clamp Meter]: The meter measures AC Current to 600 amp, AC and DC Voltage to 600 V, Resistance to 40MΩ and Capacitance to 4MF. Does not measure DC Current..
  • [True-RMS Amp Meter]: The sensing meter accurately measures distorted waveforms and provides true readings when measuring linear or non-linear loads..
  • [Advanced Functions]: Auto-off of inactivity after 15 minutes, Data Hold, MAX/MIN Reading, Low Battery Indicator and Continuity Loud Buzzer..
  • [Two-Color Backlight and Work Light]: Two-color backlit LCD Display - When the voltage 003e 80V, the current 003e 3A, the LCD backlit screen turns orange to warn you, The LCD Backlit Screen and Work Light make it easy to use in a dark working area..
  • [Suprior Safety and Service]: Standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service..
Check Stock

Oakton AO-35423-01 EcoTestr pH 2+ Pocket pH Meter 1 pack

  • AUTO CALIBRATION: The PH meter has an auto temprature compensation feature that adjusts to water temperatures and water quality to give pH readings almost instantly. As well, you can calibrate the tester with one touch button using Buffer Powder..
  • FAST AND HIGH ACCURACY: Our Digital PH Meter can ensure your pool, general hydroponics ph or even drinking water has a perfect pH balance and safe for use with Tester precision pH accuracy. Tester has a sensitive electrode sensor to read accurate pH levels. The included detailed manual will show you how to get the best accurate and stable reading..
  • AUTOMATIC TEMPERATURE COMPENSATION: No more need to take care about the temperature of testing liquid, as ph meter has built in (ATC) automatic temperature compensation, so that it can accurately determine pH value of the sample at any temperature in a range of 0 DegreeC - 80 DegreeC (32 DegreeF - 176 DegreeF)..
  • WIDE USE: Pocket Size PH Meter is the ideal test kit for home and laboratory uses.Suitable for testing the pH of drinking water, swimming pools, aquariums, reverse osmosis systems, spas or hydroponics.
  • ideal for testing water, swimming pools, aquariums, spas, hydroponics, food, wine and beer, etc..
  • MAKE YOU SATISFIED WITH THE PRODUCTS: Come with 1x PH meter, ....
Check Stock

6.56FT Inert Gas Welding Hose, Argon Flowmeter Gas Regulator Welding Hose, TIG MIG Gas Hose, 5/8\ UNF-18RH Fittings

  • Premium rubber material, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
  • Inert Gas Welding Hose Argon CO2 Flow Meter Regulator Adapter Hose 5/8" UNF-18RH Fittings 6.56 10 15 20 30 FT.
  • The hose length is 6.56 Feet, crimped standard 5/"8 UNF-18RH inert gas fittings on each end. 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
  • The hose connector compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
  • Best suitable for our OYHBO Argon Flow Meter Regulator. If you want to purchase the Regulator together, you can ask our customer service. Thanks!.
Check Stock

Automotive Smoke Machine Leak Detector VXSCAN EVAP Vacuum Leakage Tester Fuel Pipe Diagnostic Tester with Flow Meter & Pressure Gauge for All 12V Vehicles

  • 【EVAP SMOKE MACHINE】VXSCAN V3 is a professional vacuum machine for car fuel pipe system leak detection. Supports EVAP system test, tightness test,....
  • 【EASY TO USE】By heating USP mineral oil or baby oil, the automotive smoke machine can be outputs lots of smoke within 30 seconds, to improve....
  • 【SMOKE FLOW METER & PRESSURE GAUGE】Equipped with pressure gauge and adjustable flow meter which helps you control the smoke effect easily. When....
  • 【Air Mode & Smoke Mode】The V3 smoke leak tester adopts an independent switch control design, the air mode independently controls the built-in air....
  • 【WIDELY COMPATIBILITY】Our package includes all accessories (Oil not included), it supports detect the leaks of multi pipe systems on cars,....
Check Stock