Best Flow Meter Gauge

DAE AS200U-75 Water Meter, 3/4\ NPT Couplings, Measuring in Gallons

  • Horizontal Inline mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer toDAE V-75. Or DAE PVM-75, DAE VM-75P which can be installed in any position, vertically or horizontally, water flowing downwards or upwards, dial facing upwards, downwards or side-way..
  • For upgraded AS200U-75P, Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone..
  • For upgraded AS200U-75P, ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture)..
  • For product description, you can also refer to “Specification Sheet” in “Product guides and documents”. To install the DAE 3/4" water meter with the 3/4" garden hose at both ends (or one end with hose bibb and the o....
Check Stock

AUTOOL EVAP Vacuum Automotive Smoke Machine Leak Detector Diagnostic Tester

  • ...e plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system..
  • 【External Pressure Gauge】You can observe the barometer to more accurately determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car’s pipeline. If the barometer index keeps decreasing, your car’s pipeline leaks need to be repaired, and there is a barometer test. Leakage is faster and more accurate.
  • 【External Flow Meter】You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing safer.
Check Stock

New Position 3 Gallon Vacuum Chamber Stainless Steel stabilizes Degassing Urethanes, Silicones and Epoxies, High Vacuum Compatible with New Position Vacuum Pump

  • ✅【Good Sealing】 Maintain high vacuum for over 24 hours.(24-hour leak is less than 2.0 inHg).Support vacuum level down to 29.9" Hg.
  • ✅【High Quality】 1/2" Acrylic lid, not only is impact -resistant but also gives a better observation for work.Stainless Steel's resistance to corrosion plus heat and chemical damage is second to none.
  • ✅【High Precision】 The meter is installed in a separate port, so the reading is accurate even when pumping/venting the meter. 50um air filter on the exhaust valve to reduce air flow and prevent dust/dust from flowing into the chamber..
  • ✅【Easy to Install】 Easy to install in less than 5 minutes without any special tools. The Vacuum Chamer comes with 3ft hose and oil filled gauge, can be easily removed with the shut off valve turned..
  • ✅【Widely Application】 3 Gallon Lab Vacuum Chamber kit is used to degass silicones, epoxies, essential oils, and urethanes, etc.Perfect for stabilizing wood and other experiments with volitile compounds..
Check Stock

Gas Tank Fuel Gauge Meter Fits for Yamaha Grizzly 600 Big Bear Kodiak 400 ATV Gas Tank Cap Fuel Level Gauge Replacement 4SH-24260-11 4SH-24261-00

  • Fitment: The fuel gauge meter fits for Yamaha Big Bear 400 2000- 2012, fits for Yamaha Kodiak 400 1996-1998, fits for Yamaha Grizzly 600 1998 -2001.
  • Replace Part Number: 4SH-24260-11-00 4SH-24260-10-00 4SH-24260-00-00 4SH-24260-01-00 4SH242601100.
  • Measure the Fuel Level: The float of the fuel level gauge moves accurately and quickly, and it will display the remaining fuel level in the fuel tank. It is perfect for anyone who is building a custom dashboard or wants to replace their inventory fuel level gauge.
  • Durable and Rust-proof: Black aluminum bezel, polished edges, scratch-resistant curved glass lens, GUZIKO fuel meter is very fit, upgraded anti-aging and anti-corrosion seal to ensure no gas leakage or unpleasant smell, durable.
  • Easy to Replace: Use flat head screw driver to pop old ring off, push gas meter in the slot until it can't go any further, place new ring over top of meter and tighten it, the installation is complete.
Check Stock

DAE MJ-100 1\ NSF61 Lead Free Potable Water Meter, Pulse Output + Couplings, Gallons

  • Horizontal mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer to DAE PD-100 (B08D7356MY), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards..
  • Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website..
  • Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go..
  • Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also....
Check Stock

STYDDI 3 Feet Low Pressure Propane Regulator and Hose with Propane Tank Gauge, Universal QCC1 Replacement Hose with Regulator for Most LP Gas Grill, Heater and Fire Pit Table, 3/8 Female Flare Nut

  • NO NEED TO BUY EXTRA GAS METER & SAVING YOUR MONEY. This upgraded 3 FT braided low-pressure propane hose and regulator assembly is equipped with tank gauge level indicator, allows you to monitor the fuel level without necessarily removing the tank. The color-coded dial lets you see when your propane gas level is low at a glance without spending more money on extra gas meter..
  • CSA CERTIFICATED & BUILT-IN EXCESS FLOW PROTECTION FOR YOUR SAFETY. CSA certificated ensures secure, airtight connection between grill and tank. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. flow capacity too much, it will shut off the gas flow automatically..
  • EASILY INSTALL WITHOUT A HITCH! Please DOUBLE CHECK your appliance connection is 3/8" MALE FLARE FITTING CONNECTOR. Insert the black plastic fitting and rotate clockwise to your QCC1/Type 1 propane tank connection place. Then connect the regulator hose end connect to your 3/8" male flare connector propane appliance. Its compatible with your 20-50 lb propane gas tank..
  • UNIVERSAL FOR MOST LOW-PRESSURE GAS PROPANE APPLIANCE. QCC1/QCC/Type 1 hose and regulator replacement for Weber Genesis 300-series, Genesis Silver C, Genesis Gold, Genesis Platinum, Spirit E....
Check Stock

Dura Products DPABS-4315E Dura-ABS – 110V Auto Batch System w/Dura-Meter w/Lexan Faceplate, Dura-Pump w/EDPM Rubber

  • AUTO BATCH SYSTEM: This is an intuitive interface that allows for the selection of manual or automatic operation with the flip of a switch. This is a high-flow pumping system with up to 15GPM flow rate..
  • HOW IT WORKS: The Auto-Batch System is easy to use. All you need to do is select the volume desired, press START. The pump will begin to dispense fluid and automatically shuts off when complete..
  • KIT INCLUDES: The Dura-ABS kit includes high-flow Dura-Pump and Dura-Meter with Lexan faceplate. It is available in preset, quick list or manual calibration..
  • DURA METER: The fluid flow meter has 100% moisture sealed circuitry that makes meter impervious to water intrusion. It is also equipped with menu driven backlit display to check the fuel level. It can be plumbed both for in-line and 90o applications..
  • DURA PUMP: The hydraulic pump has a 30-minute duty cycle and automatically shuts off after 10 minutes. The included ¼ HP motor is thermally protected from overheating which makes it suitable for elaborated use..
Check Stock

Dura Products DPABS-4312E Dura-ABS – 12V Auto Batch System w/Dura-Meter w/Lexan Faceplate, Dura-Pump w/EPDM Rubber

  • AUTO BATCH SYSTEM: This is an intuitive interface that allows for the selection of manual or automatic operation with the flip of a switch. This is a high-flow pumping system with up to 15GPM flow rate..
  • HOW IT WORKS: The Auto-Batch System is easy to use. All you need to do is select the volume desired, press START. The pump will begin to dispense fluid and automatically shuts off when complete..
  • KIT INCLUDES: The Dura-ABS kit includes high-flow Dura-Pump and Dura-Meter with Lexan faceplate. It is available in preset, quick list or manual calibration..
  • DURA METER: The fluid flow meter has 100% moisture sealed circuitry that makes meter impervious to water intrusion. It is also equipped with menu driven backlit display to check the fuel level. It can be plumbed both for in-line and 90o applications..
  • DURA PUMP: The hydraulic pump has a 30-minute duty cycle and automatically shuts off after 10 minutes. The included ¼ HP motor is thermally protected from overheating which makes it suitable for elaborated use..
Check Stock

Argon CO2 Regulator Gauge Welding Gas Regulator with 6.6Ft Gas Hose CGA580 Inlet Connection 0-4500PSI/0-10BAR Input Pressure

  • 【CGA-580 Connection】The Argon regulator with CGA-580 Inlet Connection fits standard Argon, CO2 Gas Tanks from any supplier. The gas regulator is a standard pressure control valve that reduces the input pressure from gas stored in a tank.
  • 【Accurate Pressure Gauge】Input pressure: 0-4500PSI. The Argon CO2 Regulator has two Easy to read pressure gauge, the argon flow meter provides accurate measurement of gas. And it has Internal safety pressure relief design to protect you form danger..
  • 【Brass Material】Our welding gas regulator is made of solid brass, so the surface can keep a good looking for a long time. Precision thread design ensures high sealing performance and avoids gas leakage..
  • 【General Feature】A 6.6Ft gas hose ensures your tanks at a safe distance from your Mig Tig welding projects, 5/8'' Female and 9/16" male outlet connection. And the filter structure at the CGA-580 connection effectively prevent debris in the argon tank entering the gauge with the airflow..
  • 【Application】Our welding regulator is pefect for MIG and TIG welding. It is an economic alternative for you to get more precise gas metering, like the accurate reading of argon regulator would help you to adjust pressure before welding..
Check Stock

Bluetooth Digital Anemometer, Handheld Wind Speed Meter for Air Flow Velocity Wind Temperature Wind Chill Gauge Tester, with Phone Tablet APP

  • ➤【HAVC Anemometer Sensor】This wind meter can connect with your cellphone/ tablet app via Bluetooth, allows you take wind velocity temperature readings remotely. Which means you can control the system settings while remotely compare the airflow output of different duct vent, and balancing the HVAC system accordingly..
  • ➤【Handheld Wind Speed Meter】Accurately measures air speed 0.3~67.1 mph (+/- 5% of readings) in 5 units: m/s, ft/min, Knots, Km/hr, Mph.
  • Wind temperature -10~45℃,14℉-113℉(+/-2℃,35.6℉).
  • Wind Chill display. 2 temp sensors & 8 vanes makes this anemometer sensitive to pickup low airflow, and get accurate wind temp measurement quickly..
  • ➤【Wireless Bluetooth Anemometer】AN-100APP digital wind gauge functions with Bluetooth connect with you ios/ Android phone, tablet in 32.8 ft/10m. Tripod Mountable for continuous wind measurement logging, export for analysis.  APP can easily download on Google Play / App Store, named "intelligent anemometer"..
  • ➤【Multifunctional Wind Meter Gauge】Max/Min/Average wind speed measuring mode helps you know about the wind peak, average wind speed output. Beaufort wind scale : 0 ~ 12 to let you keep track of current wind speed level for sailing. Backlight screen and low battery remi....
Check Stock