CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)
FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)
FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
⑥ max temp of tested liquid: 158°F/70°C.
MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Bestarc Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Argon Gas Welding AGR-2
Argon / CO2 regulator and flow meter, suitable for most argon tanks, argon hose for Miller, Lincoln, Hobart, HTP, and most other welders.
The material of body is quality brass. Sturdy and durable.
Easy to use, gas regulator can be directly screwed into argon or argon / CO2 tank, ideal choice for MIG TIG welding, chemical and electronics industry.
Accurate to read, pressure gauge reads from 0 - 3500 PSI, and the square flow tube reads from 0-25 CFH.
We provide high quality products at fair price, one year warranty, professional after-sales service.
MEANLIN MEASURE Argon Regulator Flow Meter with 6.5 Feet Hose,CGA580 Inlet Connection,5/8' x 18RH Outlet Fitting,Dual Output Argon Welding Flowmeter for TIG MIG Welder
【Easy to Read】2″ gauges for easy reading. Makes adjusting your pressure values a piece of cake..
【CGA-580 Inlet】This Gas Pressure Regulator Can Be Used with Argon, Helium and CO2 Gas Tanks,Ideal for MIG and TIG welding applications..
【Accurate Measurement】This Gauge measuring range 0-4500PSI,It has a highly sensitive pointer to sense the pressure in the pressure tank,so it is more reliable than the flow-gauge style..
【Excellent Quality】Our Double Dutput Argon Regulator Is Made Of Brass For High Strength, Toughness And Corrosion Resistance For Long Term Use..
CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose
Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
VIVOSUN Argon/CO2 Regulator Emitter System with 50 PSI Fixed Max 4000PSI Inlet Pressure Precise Brass Regulator for Gas Control in Hydroponic Grow Tent House Aquarium Welding
Durable Material: This regulator’s body is made of high-quality brass, which has high strength, high toughness and corrosion resistance, and strictly tested to ensure long -term use.
Precise Control and Measurement: This regulator equipped with a flow meter and pressure gauge.
Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFH.
The pressure gauge ranges from 0 to 4000 PSI and is used to read the amount of gas remaining in the tank.
CGA-580 Tank Inlet: The regulator fits standard Argon and CO2 gas tanks with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port.
Two Connection Ways: There are female 5/8" x 18 outlet nut and a standard 1/4" barb adapter, you can choose the connection method of the hose according to your needs.
Multiple Applications: Suitable for indoor grow rooms, grow tents, greenhouses and hydroponics to increase CO2 in the growth environment for optimal growth.
And ideal for MIG TIG welding, chemical, and electronics industries.
Spoke Tension Meter Tool, Aluminum Alloy Bicycle Wheel Tool Wire Tension Adjustment Tool Bike Accessory
Bicycle Spoke Tension Meter made of aluminum alloy stainless steel, it is durable and rust-free..
For round spokes and flat spokes.Measure the absolute tension of each of the spokes in a wheel..
Used for building or truing wheels, diagnosis wheel problems..
It is suitable for spokes of round spokes and spokes of various finished wheels..
Package includes:1pc x tension meter；aluminum alloy measuring tool wheel tension meter spoke tension meter tool bicycle spoke tension meter spoke tension gauge bike tension gauge meter park spoke tension meter Repair Tool Bicycle.
MR CARTOOL T130 Automotive EVAP Smoke Machine, Dual Mode 12V Car Fuel Pipe System Leak Tester Detector with Oil Level and Adjustable Flowmeter for All Vehicles
...t suitable for air conditioning system piping..
【Air Mode & Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min..
【Flowmeter, Oil Level Meter & Pressure Gauge】Equipped with pressure gauge, oil level meter and adjustable flow meter. All data are clear at a glance, which helps you better control the smoke effect. Built-in overheat protection, if it exceeds 176°F, it will automatically turn off the power..
【Complete Set】Comes with 4.92ft Smoke Hose, EVAP Special Connector, Standard Cone Adapter, Power Cord Clamp, Valve Core Wrench, Airbag Adaptor, Rubber Connector Part, 3.38oz Empty Bottle for test oil(Please notice: Package does not includes the baby oil), Various of Soft Rubber and Hard Rubber Hose Plugs..
【Worry-Free After-Sales】MR CARTOOL offers 24-month warranty and 7x24 hours friendly customer service to ensure your shopping experience. No need to pay extra for warranty service, saving you a lot of money! If you have any issues about the EVAP Leak Tester, don't hesitate to contact us directly..
VIVOHOME 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump and R134a AC Manifold Gauge Set Kit for HVAC Air Conditioning Refrigeration Recharging ETL Listed
...handle is designed for superior comfort and portability.
Built-in high volume cooling fan for extended use.
Oil sight glass allows you to observe the oil level and quality at any time.
The oil drain valve at the bottom ensures faster and more thorough emptying.
1 bottle of 500ml vacuum oil is also included.
MANIFOLD GAUGE SET - Manifold gauge set is designed specially to measure pressure in refrigeration equipment.
Manifolds are equipped with large viewing glasses for easy viewing of refrigerant flow, and high-quality colorful pressure gauges ensure accurate readings.
COLOR-CODED HOSES - Color-coded hoses help identify the high-pressure side (red), low-pressure side (blue), and the filling hose (yellow).
The hoses are made of rubber and feature a leak-proof seal design, which is very flexible, durable and not easy to damage.
Perfect for maintaining R134a, R12, R22 and R502 air conditioning systems. NOT SUITABLE for R410a system.
PACKAGE - Package includes 1 single stage vacuum pump and gauge set.
Ideal for automotive air conditioning, HVAC work, refrigeration and other applications and industrial requirements that need high vacuum pull from a compact pump.
