Best Fluid Power Systems

PEAK BlueDEF Diesel Exhaust Fluid, 2.5 U.S. Gallon

  • ENGINEERED: For use in Selective Catalytic Reduction (SCR) systems on diesel engines.
  • EFFICIENCY: BlueDEF diesel exhaust fluid is key to helping improve fuel economy by up to five percent.
  • PROTECTION: Diesel exhaust fluid is non-toxic and safe to handle.
  • QUALITY: Stable, colorless and odorless, and also meets ISO Standards 22241 for purity and composition.
  • EFFORTLESS: Easily Inject the fluid into your exhaust stream with a specialized dosing module.
Check Stock

HoseWarehouse Brand TGK02-HW SAE American Thread Identification Kit w/Adaptall Gauges (NPT, NPSM, ORS, ORFS, ORB, an, JIC 37)

  • 3/8" JIC Male x 1/4" Male Pipe NPT Straight Hydraulic Adapter.
  • Flared tube JIC connection on one end, with NPTF connection on other end.
  • Made to SAE J514 standards, and excellent for fluid power systems.
Check Stock

3/8\ Hose x 3/8\ JIC 37 Degree Female Hydraulic Hose Ends Crimp Fitting Compatible with Parker 43-Series | FJX-06-06-43 (10-PACK)

  • Elbow corner for connecting tubes at a 90 degree angle.
  • Flared tube JIC connection on one end, with NPTF connection on other end.
  • Made to SAE J514 standards, and excellent for fluid power systems.
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

HFS-25 1\/dn25 Flow Switch,Liquid Water Flow Paddle Control Switch SPDT Contacts 6-380V

  • This flow switch is made of high quality stainless steel, corrosion resistant and long service life..
  • This product is used to measure the fluid dynamics of fluids passing through pipes, such as water, ethylene diluents, glycols and other liquids that do not corrode copper..
  • This water flow switch is suitable for water treatment systems, central air conditioning, water cooling units, fire protection systems and other fields..
  • Flow switches are typically used in locations that require interlocking or "cut" protection..
  • When the flow exceeds the set value, the fluid drives the blade and the microswitch, and the SPDT contact can connect the circuit and disconnect other circuits..
Check Stock

Misting Nozzles 10Pcs Brass Material 28g / 1oz Weight Tap Water Low Pressure 0.2mm/ 0.01in orifice greenhouses

  • ¡¾Brass material¡¿Tap water lowpressure atomizing nozzle, made of brass material, which is durable and corrosionresistant..
  • ¡¾Oshaped sealing ring¡¿With Oshaped sealing ring, it can effectively prevent water leakage, easy to install and use..
  • ¡¾0.2mm diameter¡¿The hole diameter is about 0.2mm, fine mist, good atomization effect, and wide spray range..
  • ¡¾Low fluid resistance¡¿This nozzle has good water saving performance, low fluid resistance and long service life..
  • ¡¾For landscaping, outdoor cooling systems etc.¡¿Suitable for landscaping, outdoor cooling systems, greenhouses, humidification, deodorization, air purification, small fountains, etc..
Check Stock

6-380V 1\ Paddle Control Water Flow Switch,Partial Stainless Steel Type Flow Switch 1.0MPa SPDT Contacts

  • Adjustable flow control value and stable action point. Protection class IP54, micro switch contact life up to 100,000 times..
  • This product is used to measure the fluid dynamics of fluids passing through pipes such as water, ethylene diluents, glycols and other liquids that do not corrode copper..
  • Water flow switch is suitable for water treatment systems, central air conditioning, water cooling equipment, fire protection systems and other fields..
  • Flow switches are typically used in locations that require interlocking or "cut" protection..
  • When the flow exceeds the set value, the fluid drives the blades and the microswitch, and the SPDT contact can connect the circuit and disconnect other circuits..
Check Stock

Brake Bleeder Kit Hand Vacuum Pump Brake Fluid Bleeder Kit with Pressure Gauge Brake Bleeder Adapters Reservoir Hoses for Brake Fluid Power Steering Handdeld Vacuum Pump Brake System Bleeding Tools

  • UNIVERSAL BLEEDING KIT: Orion Motor Tech's vacuum bleeder with an adapter set works with nearly any vehicle's system and lets you bleed your brakes,....
  • SUPERIOR DURABILITY: The easy-to-use brake bleeder pump is constructed from high-grade aluminum alloy for lightweight long-term use and is anodized....
  • HERMETIC SEALING: Our tubes are made from premium silicone for better resilience, heat resistance, and sealing performance than the competition.
  • WIDE APPLICATION: Not just for bleeding brakes, this brake bleeding kit also clears oil, power steering fluid, and other hydraulic systems.
  • 1 YEAR WARRANTY: Orion Motor Tech backs this brake fluid bleeder kit with strong 1 year warranty and our usual friendly 24/7 customer service,....
Check Stock

Lubegard 20404 Universal Power Steering Fluid Protectant 4 fl oz

  • Eliminates steering stiffness and noises - Enhances all power steering fluids.
  • Converts power steering fluid to Honda Power Steering Fluid / Lowers temperature and extends fluid life.
  • Improves heat transfer from the fluid to the case wall and out the gear box / Safe for seals and hoses.
  • Frees sticky turbines and pumps / Reduces wear, thus extending the life of the power steering system.
  • Prevents thermal and oxidative breakdown / Eliminates stiffness on cold mornings.
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut-off valve for mess-free extraction. More importantly, the fluid extractor's lid is removable to allow for easy recycling of waste fluid..
Check Stock