Best Flute 17 Holes

KSEIBI Step Drill Bit Set 5 Pieces Pack High Speed Steel Black Oxide M2 Multiple Hole 50 Sizes 1/8-1-3/8 inch SAE Standard Drill Attachment (KS-575105)

  • These HSS Double-Fluted Step bit kit provide faster cutting and drilling than single flute bits. The easy-to-read step markings and targets save time when drilling holes..
  • Drills clean, accurate large holes in these materials (up to 1-3/8in. diameter) hard sheet metal, ducts, steel, stainless steel, copper, brass, aluminum, plastic, plexiglass, wood, firewood, veneers, vinyl siding, acrylic, plasterboard, PVC pipe, , fiberglass and cast iron, Ideal for electrical, plumbing and HVAC contractors..
  • M2 high speed steel along with the black coating ensures extreme durability, will stay new and shiny for years to come. Different sized shanks ensure compatibility with 3-Flat Hex Shank - Prevents bit from slipping in the chuck while drilling holes 1/4, 3/8 and 1/2 in. chuck size..
  • Step drill bit can be used on electrical drill, cordless drill, or high impact drill press machine, combo set with durable ABS plastic organizer for easy and safe storage in your tool box..
  • Dual-flute design provides greater speed and control and optimized for cordless drills driver running at high speed.
Check Stock

DEWALT Masonry Drill Bit Set, Percussion, Concrete & Block, 7-Piece (DW5207)

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Four-flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck.
  • For use with electric or cordless hammerdrills.
  • Ideal for drilling holes in brick, block, concrete, and masonry.
Check Stock

OXMUL M35 Step Drill Bit for Metal 3/16 to 7/8 Cobalt Bits Extra-Heavy Duty for Stainless Steel Hard Steel Mild Metal Aluminum Wood Industrial Grade 12-Steps Co35A2-A

  • [Extra-Heavy Duty+ for Stainless Steel] The M35 Cobalt Drill Bits is Industrial Grade and can drill 8X longer life and 3X faster. This Cobalt Drill bits can help you cut more holes, extra-heavy duty+ for Stainless Steel, Hard steel, Mild Metal, Galvanized Steel, Aluminum,Iron, Wood Plate,PVC and Copper. If you're expanding a lot of holes in metal sheet then please choose this step drill bit.
  • [M35 Cobalt Steel] This M35 Cobalt Drill bit can successfully drill more than 35 holes easily into 1/5" thick Stainless Steel plate like knife through butter!.
  • [12 Steps ︱2-Spiral-Flute] 12 Steps: from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral-Flute:Clears Chips faster.
  • [Cutting Fluid] Cutting Fluid must be poured during work for longer life! Prohibit water-cooling to prevent rust!.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock

Spit Sponge (2 pieces) Refreshingly Honest Pad Dryer and Cleaner for Oboe, Clarinet, Flute, Bassoon, Piccolo and other Woodwind

  • Dual-texture pad cleaner and dryer for oboe, flute, clarinet, bassoon and other woodwind instruments.
  • Absorbent top for pad drying and a micro-textured bottom to clean tone holes.
  • Replaces wasteful pad paper, cigarette paper, and messy powder paper.
  • Never Fray laser-fused edge + Washable for years of use.
  • Remove moisture and spit that oboe, flute and clarinet cleaning swabs and pad savers leave behind.
Check Stock

OXMUL Step Drill Bits for Metal, 1/8 to 1/2, Cobalt Bit, Heavy Duty for Stainless Steel,Metal, Aluminum, Wood, Copper, Wood, 13-Steps. #202

  • 【Heavy Duty for Stainless Steel】 The Cobalt Drill Bits(1.3243 STEEL) can drill 6X longer life and 2X faster. This Drill bits is heavy duty for Stainless Steel, Metal, Galvanized Steel, Aluminum,Iron, Wood, PVC and Copper. If you want to drill faster and many holes on metal, please choose this step drill bit.
  • 【Cobalt Bits】 Prefect for Stainless Steel/Metal Sheet/Wood/Plastic/Aluminum Sheet/Copper and other metal sheets. This Drill bit can successfully drill more and more holes easily into Stainless Steel plate like knife through butter!.
  • 【120-DAYS WARRANTY】 - If not satisfied, Any Reason, please contact us for 100% refund or replacement.
  • 【13 Steps︱2-Spiral-Flute︱1/4" Shank】 13-STEPS: 1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,13/32,7/16,15/32 to 1/2 inches. 2-Spiral Flute:Clears Chips faster.
  • 【Cutting Fluid】 Cutting Fluid must be poured during work for longer life! Prohibit water-cooling to prevent!.
Check Stock

uxcell Chucking Reamer 1/4\

  • Specifications: Cutting dia.: 5.6mm / 0.22".
  • accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Utoolmart Chucking Reamer 3/4\

  • Specifications: Cutting dia.: 3mm / 0.12".
  • accuracy: H7. Tungsten carbide tool is hardened to 50HRC, good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for applications in shallow cuts. Tungsten carbide reamer is with high hardness and strong wear resistance for long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

IRWIN SPEEDBOR Tri Flute Wood Drill Bit 1/2' X 6'(3041001)

  • IRWIN SPEEDBOR drill bits use a tri-flute design for faster chip ejection and less binding.
  • This 1/2-inch drill bit has cutting spurs with 3 cutting edges for faster, cleaner holes.
  • A full screw tip allows the drill bit to self-feed for ease of drilling.
  • The grooved hex shank helps prevent slipping in the drill chuck or bit extension.
  • Fits virtually any standard 1/4-inch quick-change chucks, including impact drills.
  • A fast speedbor spade bit that features a Tri-Flute design with a fast chip ejection.
  • Fits all standard 1/4-inch quick change chucks.
  • Full screw tip allows the bit to self feed.
Check Stock

23pcs Woodworking Chamfer Drilling Tool Set Including 7pcs 3-Point Countersink Drill Bit 8pcs Wood Plug Cutters 6pcs Countersink Drill Bits 1pcs L-Wrench 1pcs Center Punch for Wood

  • 【3-pointed Countersink Drills】- 3-point countersink drill bits include 3mm(0.11"), 4mm(0.15"), 5mm(0.19"), 6mm(0.23"), 7mm(0.27"), 8mm(0.31"), 9mm(0.35"), 10mm(0.39") for drilling pilot holes. Drill tips adopt 3-point design for quick and accurate center punching, large chip flute and five edge chamfer allows faster and easier discharge of sawdust..
  • 【Wood Plug Cutters】- Wood plug set includes 4 standard plug cutters and 4 four-tooth chambered cutters. Their shank diameters are 9.5mm(0.37"), tail diameters size are 6mm(1/4"), 10mm(3/8"), 13mm(1/2") and 16mm(5/8")..
  • 【Countersink Drill Bits】- 1/4" hex 5 flute 90° countersink drill's diameters are 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4"), 90° angle on the point are designed for sharp and precise countersinking, five-flute designed with staggered cutting teeth can insure free chip flow and rapid chatter free cutting..
  • 【Wide Application】- Our woodworking chamfer drilling tools can be mounted on electric drill, hand electric drill, bench drill, etc. They can be used to drill holes in wood, particle board, fiberboard, logs, plastic boards, PVC pipes, etc..
Check Stock

TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch To 3/4 Inch, 3/8 Inch Shank

  • TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch (6.4 mm) To 3/4 Inch (19 mm), 3/8 Inch (9.5mm) Shank.
  • 9 hole sizes: 1/4″ (6.35mm), 5/16″ (7.94mm), 3/8″ (9.52mm), 7/16″ (11.11mm), 1/2″ (12.7mm), 9/16″ (14.29mm), 5/8″ (15.88mm), 11/16″ (17.46mm), 3/4″ (19.05mm), with 1/16″ (1.59mm) increments. 3/8 Inch Shank with 3 flats to eliminate slipping.
  • Double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock