Best Flux Core

Welding Basics: An Introduction to Practical & Ornamental Welding

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • ...compact version . Also you canot ignore about this wire feed welder is the integrated wire feeder, to whom you should thank when you see a smooth wire feed. 2lbs quality welding wire included..
  • MULTIFUNCTIONS IN ONE MACHINE- You can work with CO2 gas, mixed gas or without gas. Welding machine mig uses 0.8mm or 1.0mm flux core wire.Gasless(flux core wire) and Gas(solid wire) welding: supports 2 lbs/ 10 lbs .030’’ or .040’’ wire to weld over. 030’’ thickness carbon steel stainless steel/mild steel. Duty Cycle: 60% at 130A. LIFT TIG Welding is not high frequency TIG mode, just switch to “LIFT TIG” on the panel. Stick Welding switch to “MMA” on the panel and adjust the current as needed..
  • WORKS WELL AND EASY TO PICK UP 3 in 1 welder - This portable welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs great. Less splash, simple usage and great welding seam..
  • Wide Applications- Mig welders 110/220 volts with gas is super portable and....
Check Stock

Youland Soldering Iron Tip Cleaner + 60/40 Solder Wire Reel Fine 0.6mm Tin Lead Rosin Core (1.76oz/50g) + Soldering Rosin Flux Paste Gel (0.35oz/10g) for Electronics Metalworking Welding

  • √ Ideal Choice for Soldering Accessories Kit —— Contains 3 of the most essential products for welding, saving you time of multiple purchases. NOTE: solder wire & flux were packed in the container.
  • √ Feature of Solder Iron Tip / Head Cleaner —— Sturdy metal container.
  • The Sponge made from brass coils, softer than the tip plating, yet harder than the oxidation that forms on the tip. Won't damage your soldering tips. To clean the tip, just stab the iron into the holder, great alternative to a wet sponge. No water required, meaning less chance of oxidation and won't reduce tips temperature, Avoid soldering iron cooling, improve welding efficiency.
  • √ Feature of Solder Rosin Wire Core Tin —— Produced with international standard flux formula, Low melting point: 374℉ / 190℃.
  • Good activity, Stable performance, Stable performance, fast tinning.
  • fresh smell, less smoke, no toxic gases, less splashing when welding.
  • Solder joints are bright and firm, forming a protective film on the surface of the solder joint after soldering, relieving solder joints Oxidation reaction.
  • low melting point high insulation resistance, reduced welding time.
  • √ Feature of Solder Rosin Flux Paste —— No-clean solder paste with minimal residue and no cleaning requ....
Check Stock

FORTON MIG Welder,Portable Gasless MIG160E IGBT Welder Flux-core Wire Automatic Feed Welding Machine DIY Welder Indoor Welder

  • ...uces perfect welding effects. All projects can be completed effortlessly and quickly. The current, voltage, and wire feeding speed can be adjusted which is very suitable for beginners and professionals alike..
  • 【Portable&Easy to Use】FORTON MIG machine uses 0.8-1.0mm flux-core wire.Up to 160 Amp output that allows you to weld mild steel up to 4mm plate.All metal case, Lightweight 5KG,easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • 【Overload Safety Protection】 FORTON MIG160E welder has a variety of safety protection functions, such as automatic voltage fluctuation compensation, overheat protection, over-current protection, over-load protection, etc. The 60% duty cycle ensures long-term effective welding. The ergonomic lightweight model design makes the machine very easy to be carried, and the fan with automatic temperature control makes the machine run very quietly..
  • 【Packing List】Package Content: 1X FORTON MIG-160E welder ,1 X Welding Torch,1 x Earth Clamp,1 x Power Cord,1 x Brush with Hammer,1 x 0.8mm Flux Core Wire(1kg),2 x Contact Tips,1 ....
Check Stock

YESWELDER 200Amp Aluminum MIG Welder with Pulse YWM-211P 110/220V Dual Voltages MIG Flux Cord Stick Lift TIG Multi Proces MIG Welding Machine,Spool Gun Compatible

  • Multi processes in 1: Synergic MIG /Manual MIG/Single Pulse MIG /Double Pulse MIG/ Lift TIG (TIG torch not included)/ Stick.
  • Easy to use: Synergic MIG provides communication between the power source, feeder, and gun. Easy work with new welders or users..
  • Can take up to 0.9mm (.035") MIG solid wire (Gas MIG) and 0.9mm (.035") MIG Flux wire(Gasless MIG)..
  • Various Welding Wire Suitable for all kinds of welding requirements .023”/.030”/.035” solid/SS wire, .023”/.030”/.035” flux core wire for....
  • Safety:Automatic Protection Function for Over-current, Over-voltage and Over-heating.
Check Stock

5 In1 Lead Free Solder and Solder Flux Kit | 50g Lead-Free Solder Paste | 0.6mm Solder Wire with Rosin Core | 5 Pcs Replacement Soldering Iron Tips | Solder Supplies for Electronics Metalwork Weld

  • [Good quality soldering wire] Lead free solder wire with rosin core: 0.6 mm/ 0.023 inches.Materials: Sn99.3%, Cu0.7%. Weight: 50gram/0.11lbs/1.76ounces.Lower Melting Point, good welding performance..
  • [Rosin Solder Flux] Lead free flux, PH7±0.3, Weight: 50gram/0.11lbs/1.76ounces. Solder flux facilitates the flow of solder, solder paste can increases efficiency of the soldering process,allows solder to form strong..
  • [5 Solder Tips] Copper tips are plated with iron, nickel .5 Pcs replacement soldering iron tips for different shapes and sizes.This speical customized tip set can achieve almost any soldering application you need..
  • [Protect users and the environment] We use lead-free formula to ensure that your welding work will not harm your health due to lead smoke.At the same time, lead-free products will not damage our environment due to product residue..
  • [Surprise price]Buying this set will save you more money than buying any of the products in the kit separately.If you are not 100% satisfied just contact us, we will provide you with a full refund or exchange immediately! No any risk, add to your cart now..
Check Stock

Mig Welder Machine Inverter Gas Gasless RBM1500 Mig Stick Tig 4 in 1 Flux Core 220V Supports 2LB Wire Automatic Feed for Beginner

  • [Multiprocess MIG Welding] gasless(flux core wire) and gas(solid wire) welding :supports 2lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel..
  • [Stick Welding] switch to “MMA” on the panel and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well.
  • [Generator Supported] this welder works well with a generator,but we suggest a 5000W above generator【30A breaker suggested for 220V】.
  • [Warranty] buy this welder with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.Click on the add to cart button now!.
  • Packing List : 1X dual Mig150,1X earth clamp,1X electrode holder,1X welding torch,1X 2lbs flux cored wire,1X welding hose.
Check Stock

Weldpro 200 Amp MIG210LCD Dual Voltage 115V/230V 5 in 1 Multi-Process MIG/Fluxcore/DC Lift TIG/Stick Welder Aluminum Spool Gun Capable with Spot Timer and Auto-Set 3 year warranty welding machine

  • Weldpro’s flagship 200 amp multi function MIG welder with LCD display. Now with exciting new added features and easy access menus offers amazing versatility for more precise welding results..
  • The model 210 LCD is also capable of true lift TIG welding as well as stick welding and aluminum welding with the optional spool gun. The MIG 210LCD is not only an intuitive synergically designed MIG / Flux Core welding machine, but now offers the option for total independent voltage and wire speed control..
  • MIG, Stick or Lift TIG welding all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A.
  • TIG: 20-180A. 30% at 200 Amp rated duty cycle.
  • Added new features include in MIG Mode, Run-In, Spot Weld, Gas Choice, Synergic or Full Manual controls, on screen polarity swapping for Flux Core vs Gas MIG. and in Stick (MMA) mode, On screen electrode type choices, Hot Start, and Arc Force..
  • Color LCD display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with indication. User adjustable inductance settings..
Check Stock

Lincoln Electric, K2857-1, Engine Driven Welder, Ranger 225

  • MIG, flux-core and TIG welding capable (with optional equipment).
  • Powerful 23 HP Kohler 2-cylinder, 4-cycle engine with overhead valve air-cooled design.
  • Totally enclosed case with 3 service access doors keeps the engine fully protected.
Check Stock

Klutch 2-Tier Welding Cart with Locking Cabinet - 31 1/2in.L x 16 1/8in.W x 28in.H

  • POWERFUL 6-IN-1 MIG WELDER: The multi-process welding machine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire, .035”/.045” aluminum wire..
  • SYNERGIC MIG: Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders. Cooling fan that runs only when it's needed so no constant buzzing sounds..
  • MULTI-FUNCTIONAL WELDER: The MIG welder features some special functions that included adaptive crater, burn-back adjustment and pre-flow/post-flow, which improve your welding efficiency. 2T/4T 2 welding way meets your needs. Store 10 preset settings: can set 10 groups of parameter data for each welding mode, it’s more convenient to start the next welding job..
  • REVOLUTIONARY LARGE LED DISPLAY: Exclusive human-computer Interaction LED screen design, provides you with accurate data display and makes you read easier an....
Check Stock