Rear Derailleur, Huazu Shimano Bike Parts Gear Shifter RD-TZ31-A with Direct Mount for 6/7 Speed Mountain Bicycles
MODEL: RD-TZ31-A bike rear derailleur, Compatible with GS 6 / 7 speed SIS Index Shifting drivetrains..
STABILITY: Durable aluminum alloy and plastic alloy material, Providing excellent shifting performance ensure safe and stable..
PARM: Total capacity 34T, Largest sprocket 28T, Smallest sprocket 14T, Front chain wheel tooth difference 20T..
NOTE: The bike rear derailleur is direct mount, not hub bolt mount. Please check the mount type of the original part before ordering, if bike frame with hook, as picture shows, you can use it..
COMPATIBILITY: Suitable for mountain bikes, road bikes, folding bicycles and so on..
Konohan 6 Pack Bike Rack for Garage Wall Mount Bike Hanger Storage System Vertical Bike Hook, Easily Hang and Detach for Indoor Shed, Hanging Bicycle for Apartment Holds up to 70 Lbs
Save Garage Space: with the bike hangers for garage, you can hang your bike vertically from the wall, which can save space in your garage, suitable for most bikes, including folding bikes, road bikes and mountain bikes, as long as their tire width is less than 2.5 inches.
Higher Load Capacity: the bike rack is mainly made of stainless steel, sturdy and solid, with better load capacity, can keep the bicycle from falling, also can improve the safety and stability of your suspension of different bikes.
Stationary Bike Hanger Hook: the bike storage rack is stationary, so that you can easily hang up the bike, and the bike does not swing up and down, convenient and practical, saving you a lot of time and energy.
Tire Protection: the bike garage hanger is wrapped in thick rubber, soft and durable to protect the tires from scratches, designed with 9 skid bars to reduce extra friction and keep your bike from slipping and falling.
Its front end adopts large radian design, not easy to break your bicycle axle.
Easy to Install: if you want to install the bike hanging hook on the drywall, you need to install it on the top of the bolt to support the weight of the bike, allowing staggered height, the recommended spacing should be between 14 inches and 16 inches.
Ibera Horizontal Bike Wall Mount Hanger, Indoor Bicycle Hook Holder Storage Rack for Home or Garage, 45 Degree Adjustable Angle to Keep Bike Level
The wall hanger's angle (45°) can adjust to keep your bike level. Correct height for hanger tyres should sit atleast 4 inch off floor or ground. Bracket must be mounted 2 hole side up.
Designed as a horizontal mounting wall hanger for a single bike to save floor space. Weight limit- 39.6 pounds.
The sturdy and durable construction made out of aluminum makes this hanger safe for bikes to hang on the wall.
The double arm hanger has padded ABS arms to keep the bike secure and protects against paint damage.
Suitable for most conventional bike frames. Hanger beam length is adjustable to fit narrow or wide handlebars.
Mount hanger on masonry or concrete wall with anchors. Do not mount hanger on plasterboard wall or dry wall unless there is a wood stud behind. If you have any questions about the installation, seek for professional help..
Delta Cycle Leonardo Bike Rack Garage Wall Mount Storage, Elegant Vertical Hanger Hook Design Provides Easy Bicycle Storage Access, Bike Wall Mount Rack Holds Any Bike Up To 40 lbs., Fat Tire Option
Space Saving Bike Wall Mount :: Proprietary vertical bike hanger securely stores any bicycle up to 40 lbs off the floor. The Leonardo bike rack garage features a clever hook shape for easy in/out bike access. Your next ride is only seconds away.
Hassle-Free Installation :: These bike hooks for garage wall quickly mount to any wall stud with included hardware. Easy peel-and-stick rear tire tray stabilizes your bike while also protecting your walls.
Anti Scratch Coated Hooks :: Contemporary design features a durable non-slip rubber coated bike hook to protect your tire rim from scratches.
Looks Good In Any Room :: Available in either a premium silver or black powdercoat finish, these bike hanger hooks provide an elegant look and design, complimenting any apartment, office, or garage.
A Leader In Bike Storage :: Over 1 million cyclists trust their bike's in Leonardo vertical bike racks. For over 30 years delta has been a trusted leader in bike storage. Designed and engineered in the US with US based customer support to deliver an A+ customer experience.
Aimoerfan Bike Rack for Garage,Bike Wall Mount-Vertical Indoor Storage Adjustable Bikes Hanger In Home,Safe and Secure Easy Install Cycling Holder,Bicycle Hooks for Hanging Mountain,Road,Hybrid Bicycles,Orange
【Convenient Bike Rack】Bike Wall Mount is The Perfect Space Saver for Apartment, Home, Garage and Shed, Indoor or Outdoor, By Hanging Bikes Vertically Flat Against The Wall. Save The Space and Store Your Bikes Orderly, Keep Your Space Tidy and Clutter-free..
【Safe & Stable Bike Hooks】Wall Mount Made From German Reinforced ABS Material with Scratch-proof Coating. Store The Bicycle on The Wall By Adjustable Angled Hook Which with Silicone Surface Can Protect The Wheel Rim and Anti-slip..
【Easy to Install Wall Hook】The Bicycle Storage Rack Can Be Easily Installed on The Wall. The Package Comes with All The Mounting Screws and Can Be Installed In A Few Minutes. Please Follow The Instructions..
【High Quality Bicycle Rack】Made of Strong Scratch Resistant Reinforced ABS, Light-weight and Durable. If You Have Any Product Issues, We’re Very Happy To Either Provide A Refund or A Replacement on Your Purchase. 24 Hours Customer Service Online..
【Compatible With Most Bike】Wall Bike Rack Works for Most Bikes, Like Road, MTB, Cyclocross, Touring, Hybrid, Beach Cruiser, BMX and Kids' Bikes, Also Suitable for Bicycly with Fenders. Ideal for Bike Storage In Home, Office, Garage, Apartment or Bicycle Shop Retail Display..
Bike Block Fork Mount, Quick Release Fork Mount Truck Bed Bicycle Carrier, Aluminum Alloy Bicycle Front Fork Fixed Clip Luggage Rack for Truck/Trailer/Bikes
【Bike Car Rack Front Fork , Aluminium Alloy Bike Block Fork Mount】- The Bike Fork Mount is fixed between the luggage rack grooves to enhance stability but only the car with this luggage rack then can use. Can be used for many bicycles and vehicles. Which is made of aluminium alloy material, hard and resistant to pressure, safe and stable, strong bearing force..
【Quick Release Bike Fork Mount, Quick Release Fork Mount Truck Bed Bicycle Carrier】- Quick release bar design, convenient to install and remove. Simple and Practical, The quick-release forklifts can be mounted on the wall for storage or on a small truck or trailer for transporting bicycles..
【Portable Cycling Accessories Bicycle Front Fork Fixed Clip Luggage Rack For Truck Trailer】- Bike Hitch in Car Rack, Our Bike Fork Mount secures bikes to the back of a pickup/ SUV/ or car roof top. Compact size about 16.5x5.9x4cm, small size design easy and quick to install, no damage to paint, easy to carry and no burden..
【Easy to Install Bike Car Racks Carrier, Practical Bikes Accessories Cycling Equipment】- This fork mount bike block can be mounted vertically or horizontally to suit your needs. Quick release alloy construction allows the bicycle fork mount bracket to be durable without add....
Ultrawall Bike Storage Rack,6 Bike Storage Hanger Wall Mount for Home & Garage Holds Up to 300lbs
LARGE CAPACITY:Garage wall mount bike rack garage could accommodate 6 bicycles and hold up to 300 lbs.
CUSTOMIZE BIKE STORAGE: Space attachments to 48" long steel rail to customize spacing to fit your needs.
SAFETY:The sturdy safety hook design could ensure that your bike wall mount stable and will not release accidentally,perfect choice for your garage storage..
EASY TO INSTALL—The bike storage rack is easy to attach and move around on the rail with 5mm drill. Heavy duty mounting hardware (16*Screw, 16*Expansion tube). Hardware with the kit for wood stud ,drywall,create or brick wall.(Bikes not included).
SUPER MATERIAL FOR DURABILITY—Powder-coated steel for durability-resists of rusting, chipping and cracking. Rubber-coated sleeves are scratch-resistant. Steel construction epoxy finish..
Voilamart 4PCS Wall Mounted Bike Rack Garage Space Saving Bicycle Wall Hanger Vertical Bicycle Storage Stand for Indoor Garage Max. 66 Lb
Heavy Duty: Made of strong solid steel, light-weight and durable. Can handle up to 66lbs of a bike, and it depends on how strong the wall is..
Rubber Coating: Hooks feature a rubber coating to protect your bicycle from scratches..
Dimension: Accommodates tires width with 2.17" or less. Suitable for road bikes, folding bikes etc..
Easy Installation: It don't take too much effort to install. 3 Steps: - drill hole, place studs, tighten screws. All screws and studs needed are included. Great storage solution for small spaces..
Locking Mechanism: Safety engineered locking mechanism prevents accidental release. Important!！！Do not mount hanger on plasterboard wall or dry wall unless there is a wood stud behind..
Gootus Bike Wall Mount Hanger - Horizontal Bicycle Indoor Storage Rack | Cycling Wall Mounted Holder Hook - Hang Your Road Mountain or Hybrid Bikes in Garage or Home
Fits Most Bikes - Gootus wall mount bike storage system is compatible with road bikes, mountain bikes, cyclocross, hybrid, and kid bikes. Note: Not....
Save Space - This storage bike hanger is the perfect floor space saver for apartments, homes, garage and sheds. Keep your garage or indoor space tidy....
Adjustable Bicycle Mount - Hang and store your bicycle horizontally, allowing for convenient storage and removal. The Hanger beam of the bicycle....
Anti-scratch & Secure - The bicycle hook is completely wrapped by sponge, will not scratch your bike, whether aluminium, titanium, carbon or steel.....
Important - Only install bike wall hanger on a solid stud, beam, brick, masonry or concrete wall. Do not install directly on plasterboard or dry wall....
