1 Inch Ball Valve, Premium 304 Stainless Steel Full Port Forged NPT Ball Valve for Water Oil and Gas with Long Handle Shut Off Switch, 1000 WOG ( 1 Piece, FNPT to FNPT )
Quality Materials: Full Port Heavy Duty 1" Ball Valve is made of high quality 304 stainless steel, lead free, Safer and stronger, long lifetime. It is the ideal plug valve for high quality shut- off valves in industry or in the home and garden..
Suitable for a variety of media: The high-quality stainless steel ball valve is suitable for water, sea water, air, oil, and steam media with a temperature of -10 ℃~120℃.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Convenient operation: This high pressure 1 inch ball valve has a comfortable operating handle, which opens and closes quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
Good sealing: It has two sealing surfaces with good sealing performance and can achieve complete sealing. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes..
TaylorMade SiM UDI Iron #3, 20 Degree Loft, Graphite Shaft, Right Hand, Stiff Flex , Titanium
Tour Validated Shape: Tour inspired shaping with a refined leading edge, thinner topline and a moderate sole for improved turf interaction. Minimal offset preferred by better players encourages greater confidence at address and enhanced workability.
SpeedFoam: Ultra light urethane foam injected inside the head engineered to push the design limits of face speed while simultaneously improving feel.
Hollow Body Construction: Delivers clean aesthetics while also allowing for a low and forward CG placement for a powerful and penetrating ball flight.
Forged C300 Face With ICT: A lightweight ultra-thin face forged from C300 steel allows for a stronger face and explosive ball speeds.
engineered with Inverted Cone Technology for an enhanced sweet spot and to promote a straighter ball flight.
Thru Slot Speed Pocket: Our most flexible Speed Pocket design engineered to maximize ballspeeds and provide forgiveness on low face shots.
DEPENDABLE STRENGTH. This tow hook ball hitch is constructed from high-strength forged steel for maximum strength in recovery towing and straight-pull applications.
VERSATILE USE. This forged trailer hitch tow hook comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver.
READY TO TOW. Recovery towing is easy with this 2-inch tow hook mount. It can be used for pulling another vehicle, stumps and other offroad applications.
CORROSION-RESISTANT. For long-lasting use, this tow hook ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
EASY TO INSTALL. To install this tow hook hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
TaylorMade SIM 2 Max Draw Driver Mens Right Hand Graphite Senior 10.5 Degree
New Forged Ring Construction. Forged from a lightweight and high strength aluminum that is milled to an exacting shape, it unites a massive rear weight, a full carbon sole, crown and a new milled back cup face..
SIM Inertia Generator. The asymmetric Inertia Generator is designed to provide faster club head speed through advancedgeometry and aerodynamic analytics..
Speed Injected Twist Face. Improves ball speed by calibrating each head to the threshold of the legal speed limit with corrective face curvature also protecting against heel and toe mis-hits..
Thru-Slot Speed Pocket. Our most flexible Speed Pocket design engineered to maximize ball speeds and produce additional forgiveness on low face strikes..
Draw bias designs promote a right-to-left ball flight at the expense of forgiveness. By reconstructing the driver head and shifting the asymmetric Inertia Generator closer to the heel, we're able to maintain forgiveness while enhancing draw-bias..
TaylorMade SIM 2 Draw Driver Women's Right Hand Graphite Ladies 12 Degree
New Forged Ring Construction. Forged from a lightweight and high strength aluminum that is milled to an exacting shape, it unites a massive rear weight, a full carbon sole, crown and a new milled back cup face..
SIM Inertia Generator. The asymmetric Inertia Generator is designed to provide faster club head speed through advancedgeometry and aerodynamic analytics..
Speed Injected Twist Face. Improves ball speed by calibrating each head to the threshold of the legal speed limit with corrective face curvature also protecting against heel and toe mis-hits..
Thru-Slot Speed Pocket. Our most flexible Speed Pocket design engineered to maximize ball speeds and produce additional forgiveness on low face strikes..
Draw bias designs promote a right-to-left ball flight at the expense of forgiveness. By reconstructing the driver head and shifting the asymmetric Inertia Generator closer to the heel, we're able to maintain forgiveness while enhancing draw-bias..
2Pcs Hex Key Adapter for HVAC Service Ratcheting Wrench, 1/4-Inch Square to 3/16 and 5/16-Inch Hex, For HVAC Compressor Service Valve, Rotalock Valves Open or Close
[WHAT YOU GET] – You will get 2Pcs hexagon key adapters for air conditioning ratchet wrench, provides access to 3/16-Inch and 5/16-Inch hard to reach valves..
[FEATURES] – Spring loaded ball bearing on hex adapter locks securely into HVAC service wrench..
[WIDE APPLICATION] – The A.I.FORCE Hex Key Adapters are designed to open and close the compressor service valve, rotalock valves and shutoff valves on air condition, refrigeration and other equipment, although there is very limited space..
[COMPATIBILITY] – The HVAC Service Hex Key Adapters fit for 1/4-Inch square wrench opening on Ratcheting Wrench, and compatible with 3/16" and 5/16" hex valves..
[PREMIUM QUALITY] - The A.I.FORCE Service Hex Key Adapters are constructed to last with high grade steel alloy, heat-treated for maximum strength..
Presta Valve Adaptor - Presta Schrader Valve Adapter - Presta Valve Adapter Bike Pump - Ball Needles for Air Pump - Air Pump Needle for Balls
Now you can can inflate your tires with Presta Valves using any "standard" Schrader Valve bike pump. You can use one inflator adapter for all your bikes with Presto Valves and also leave one in the garage with Air Compressor..
These Bike Adaptors are so light and can be left on the Presta Valve. That's a time saver if you are using a compressor to inflate your tires. No need to remove the Shrader Adapters..
Presta Valve will be the proper bike pump attachment to air up tire inflator adaptor..
Bike Pump Adapter will make Life Much Simpler. Ball Pump Inflator Needle for exercise ball..
Presta Valve pump adapter made Quality Aluminum alloy with rubber ring seal..
Cozyel 12 GPM Air-Operated Air Diaphragm Double Diaphragm Pump Cast Iron 115 PSI Dual Diaphragm Air Pump Petroleum Fluids 1/2 inch Inlet/Outlet QBK-15
Air-Operated Double Diaphragm Pump 12GPM 1/2Inch Inlet And Outlet. The diaphragm pump features an externally serviceable air distribution system and all-bolted construction, with convenient operating, are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc.
A diaphragm pump (also known as a Membrane pump) is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or teflon diaphragm and suitable valves on either side of the diaphragm (check valve, butterfly valves, flap valves, or any other form of shut-off valves) to pump a fluid..
Rugged construction - resists corrosion for reliable performance and long life.Bolted construction is designed for leak-free fluid handling..
Good abrasion resistance and heat resistance..
Easy access to ball checks and fluid caps for maintenance and repairs..
DURATECH Heavy Duty Ball Joint Press & DURATECH 8-Piece Pliers Set
...nclude 4-wheel drive (4WD) adapter. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
DURATECH Heavy Duty Ball Joint Press - Made from heavy-duty forged steel technology, through the Charpy impact test, black oxide coated on the adapter with a robot hands helps improve oxidation and corrosion resistance, ensuring durability and long life. It is even ideal for professional mechanics.
DURATECH 8-Piece Pliers Set - Professional forged Cr-V Steel & Cr-Ni Steel & high quaility steel, heat-treated, provides high strength and durability. Chrome plated for rust resistance, with high hardness and wear resistance.
DURATECH 8-Piece Pliers Set - These pliers tool come with a soft TPR handle that makes them more comfortable and secure than others. The pliers set comes with a premium roll-up pouch for easy organization and convenient storage, and the tailored cover keeps pliers from sliding out.
SharkBite 1/2 Inch Check Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE U2008-0000LFA
SHARKBITE BRASS CHECK VALVE: This push-to-connect brass check valve allows you to prevent the reverse flow of water quickly and easily.
ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
VERSATILE: Pushfit spring-loaded check valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass check valves allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
can be installed horizontally or vertically.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
SPECS: Made with DZR forged brass, this check valve can withstand 200 degrees F and 150 PSI.