Winterize RV, Motorhome, Boat, Camper, and Travel Trailer: Air Compressor Quick-Connect Plug To Male Garden Hose Faucet Blow Out Adapter with Valve (Lead-Free Brass)
...avel trailer by blow out method. This is a safer, healthier, and environmentally friendlier winterization tool when compared with those winterizing kits that use antifreeze..
Flexible hose allows the adapter to access tight spaces and minimizes stress on pipes and fittings. Pre-assembled length: 11.5 inches approx. Pressure rating: 250 psi. 100% outdoor rated, virtually indestructible, impervious to water and oil..
Hose: Flexible Reinforced Synthetic Rubber, water and oil resistant (Insta-Grip hose, made in USA).
For your health and safety, the fittings are made of lead-free brass, certified to contain less than 0.25% lead. Always wear safety goggles when handling or using compressed air..
This winterization tool is made from the highest quality parts. The shut-off valve is made from forged brass (not brass casting) for extra strength and durability. If you are looking for a heavy duty tool that lasts a lifetime, this one is for you! This blowout adaptor may also be used to winterize sprinkler system, drip irrigation system, soaker hose, spigot, faucet, sillcock, water garden hose and hose bibb where applicable. Assembled in Wichita, Kansas, USA with domestic and foreign parts..
Industrial Misting System - Patio Misting System - 250 PSI Misting Pump, Stainless Steel Tubing - For Residential. Commercial, Outdoor Restaurant and Industrial Misting Application (20 Nozzle System)
Base 20 Nozzle Stainless Steel Mist Kit Includes: 250 psi mid pressure pump with built-in solenoid and filtration 38ft Stainless Steel tubing for push lock (Pre-cut 2ft sections) 22ft UV coated Flexible 1/4" feed line 20- Nickel Plated Push Lock Misting Tees 1- End plug 2- Nozzle plugs 20- Nickel plated brass/stainless steel Nozzles (0.012") Stainless Steel Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
Misting Pump Features : Stainless Steel Mist Line Whisper quiet operation Built in Solenoid Valve Built in Filtration Outdoor Enclosure Wall Mountable Steel Enclosure Max Pump Pressure 250 Psi 110v AC Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable high pressure push lock fittings Stainless Steel Clamps.
VEVOR Kegerator Tower Kit, Single Tap Beer Conversion Kit, No Tank Keg Conversion Kit, Stainless Steel Keg Tower, Deluxe Kegarator Beer Conversion With Dual Gauge Regulator & D-System Keg Coupler
Dual Gauge Regulator: This commercial-grade dual pressure gauge regulator is constructed durably. The top pressure gauge indicates the output pressure, and the side pressure gauge tells you the remaining amount in the CO2 tank. The T-shaped regulating valve can easily adjust the barrel's CO2 pressure and the independent shut-off valves for dispensing up to two kegs at the same pressure..
D System Keg Coupler: The keg coupler has a sturdy nickel-plated forged brass body and a stainless steel nozzle suitable for all "D" system kegs. The lever handle is designed to be easy to use and makes it more stable and reliable than standard keg couplers..
Single Faucet Beer Tower: 3" diameter beer tower consists of a 304 stainless steel body, sturdy and durable. It has a small and exquisite appearance and is equipped with a single faucet along with a set of fittings, which is easy to install and can enjoy happy beer time with friends together..
Heavy-duty Beer Wrench: This beer faucet wrench features an all-metal structure, and it allows you to loosen or tighten the calf collar quickly and surely without scratching t....
Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting
SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries..
CONNECTORS & ADAPTORS - The kit includes 4 x MNPT Plugs, 4 x FNPT Plugs, 2 x FNPT Couplers, 2 x MNPT Swivel Plugs, 1 x MNPT Coupler, 1 x Male Co....
Dbgogo CGA-320 Keg CO2 Regulator, Brewing Dual Stage Gauge Beer Kegerator Pressure Regulator with 1/4” & 5/16” Quick Disconnect Barb Connectors and Safety Pressure Relief Valve for Co2 Cylinder Tank
Heavy duty CGA-320 beer keg co2 regulator, no leaks: upgraded brewing beer kegerator pressure regulator features a heavy-duty forged brass body for sturdiness and durability. CGA-320 co2 regulator fits all standard co2 cylinders tanks with CGA-320 outlet. CGA320 cylinder fitting features a hexagonal design for easy tightening with an adjustable wrench. just put a white sealing washer into gas cylinder connector, which can prevent connection between co2 cylinder and keg regulator from leaking..
Stable, easy-to-read, drift-free dual gauge: Dbgogo co2 tank regulator features dual pressure gauges, 0-60 psi output pressure gauge displays amount of co2 pressure provided to beer keg, 0-3000 psi cylinder pressure gauge displays amount of co2 pressure left in cylinder. dual pressure gauge regulator can accurately and stably monitor working pressure in home-brewed beer carbonation system at any time, and reading is simple, which is very suitable for brewing carbonated beverages, beer and tea..
Easy to manually adjust system pressure, locking ring maintains stable pressure setting: co2 regulator has 2 manual adjustment knobs to control entire brewing system pressure. you can set beer keg pressure by slowly turning pressure adjustment knob in “+” direction. tu....
Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)
SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
this enhances the installation of the push connect fittings process in a narrow space.
These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
EastFly Auto Fuel Injection Pump Pressure 0-140PSI Gauge Automotive Injector Test Gasoline Tester Tool Kit for Cars Trucks Vehicles Engine Not for Diesel Vehicles
The fuel pressure tester has all necessary fittings to attach to any kind of pressurized system.
Will work on most vehicles which has a Schrader test....
The Fuel pressure tester can quickly indicate if fuel pump is defective or inconsistent in pressure flow and set to your motor / car, get accurate....
Easy to install and get the pressure readout. Durable plastic blow-molded case to protect components and provide easy transport and organization.
Provide with accurate readings(0-140PSI).
Made of high quality material (Brass, Steel, Rubber, Plastic), rugged and long-lasting, the size of all Fittings is in the instruction below.