Best Front Brake Cable

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

BUCKLOS Shimano MT200 MTB Hydraulic Disc Brakes Set with 160mm Rotors Front Left 800mm Rear Right 1550mm/1650mm Mountain Bike Hydraulic Brake Aluminum Alloy Levers with Calipers

  • Massive stopping power:Shimano hydraulic brakes is the best Upgrade kit from mechanical brake, dual-piston line pulling hydraulic brake caliper helping you braking easier, you can stop with almost no pressure..
  • Quiet braking: The brake pad of this bicycle disc caliper is made of resin-metal composite pads, not only not damage your rotor, but also not make any noise when braking.
  • Compatible most bikes: shimano disc brakes set suitable for most mountain bikes, electric ebike,fat bike,folding bike (You only need to consider whether the tubing is long enough, package not inclued adapter).
  • Easy to install: shimano brake kit uses mineral oil fluid(pre bled), unboxing Ready to install and use. And unlike other low-end hydraulic brakes, you can easily buy professional maintenance tools and pad.
  • Brake size: for Bucklos mtb disc brake,left side controls the front, right side controls the rear, cable of front is 800mm, cable of rear is 1550mm..
Check Stock

BUCKLOS Shimano MT200 MTB Hydraulic Disc Brakes Set Front Left 800mm Rear Right 1550mm Bike Hydraulic Brake Aluminum Alloy Levers with Calipers Fit Mountain Bike/E-Bikes/Fat Bike Pre-Bled

  • Massive stopping power:Shimano hydraulic brakes is the best upgrade kit from mechanical brake, dual-piston oil pressure hydraulic brake caliper....
  • Quiet braking: The brake pad of this shimano mt200 hydraulic brakes is made of resin-metal composite pads, not only not damage your rotor, but also....
  • Compatible most bikes: shimano disc brakes set suitable for most mountain bikes, electric ebike,fat bike,folding bike,scooter (You only need to....
  • Easy to install: shimano hydraulic brake set uses mineral oil fluid(pre bled), unboxing ready to install and use. And unlike other low-end hydraulic....
  • Brake size: for Bucklos shimano brakes,left side controls the front, right side controls the back, cable of front is 800mm, cable of back is 1500mm..
Check Stock

Farbetter Bike Disc Brake Kit Including Front and Rear Caliper 160mm Rotor Mechanic Tool-Free Pad Adjuster for Mountain Bike Road Bike Fixed Gear Bike MTB BMX Red

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Rear Brake Cable, 1x Disc Rotor Adjuster, and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets-Disc Rotor Adjuster, help you to adjust the gap between rotor and caliper easily..
  • Ideal Replacement: with fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Widely Compatible: Suitable for most Mountain Bike, Road Bike Mechanical Disc Brake System..
Check Stock

Hotop 2 Set Road Bike Brake Cable Gear Cable Wire and Caps Set (2 Set Road Bike Brake Cable Style B)

  • Package contents: 4 pieces pear ended brake cables, 4 pieces gear shift cables, 8 pieces cable end caps, and 8 set donuts (24 pieces).
  • Sufficient length of cables: the bike brake wires measure 1.7 m in length, enough for spare and replacement in daily life.
  • And these cables can be cut into a suitable length for your bikes.
  • 8 Set donuts: these donuts fit to those cables measured 1.2 - 1.5 mm in diameter, please wear them on the cables when using them.
  • Application: the complete cable replacement kit is suitable for road bikes and fits for application on front and rear brake or gear.
  • Protective tool: wearing donuts on the cables is favorable to protecting your bike to from being grinded lacquer.
  • The cable end cap wear on cable end can avoid scratching and keep the cable ends nice and tidy.
Check Stock

Mysanil Bike Brakes Set, Bike V Brakes Aluminum Alloy V-Type Brakes with 2 Pieces Braking Cables and 4 Pieces Cable End Caps for MTB, Road Bike, BMX

  • ...ll-aluminum, strong and durable, can be used for a long time, cold resistance, heat resistance, oxidation resistance, not easy to deform, ensure the brake is sensitive, suitable for most weather conditions riding.
  • Specification: The arch of a bicycle brake is approx. 110 mm/ 4.3 inches, brake pads 55 mm/ 2.1 inches, front brake cable length 0.72m, rear brake cable length 1.75m, bicycle brake lever for handlebars with a diameter of 2.2 cm/ 0.87 inches, suitable for most bicycles.
  • Stop Smoothly with Less Noise: The grooves of the brake pads can effectively prevent sand or stone damage the wheel rims.
  • The slightly curved design can provide better braking power and reduce stopping distance smoothly with lees noise.
  • How to Install: To Install the brake to the bike first, (Holes correspond to holes),then, the brake cables pass brake wire tube. and fix the position of wire tube, then Fix the brake line on the bolt. and install the brake caps. to adjust the length and distance and position of the brake tube, and fix the brake line well..
  • Satisfactory Service: Thank you for your purchase. If you have any questions about the product, please feel free to contact us for consultation, we will give you a satisfactory solution within 24 hours..
Check Stock

Hotop 2 Set Road Bike Brake Cable Bicycle Gear Cable Wire with Caps Complete Inner Replacement Set (Road Bike Brake Cable Style A)

  • Package contents: 4 pieces pear ended brake cables, 4 pieces gear shift cables, 8 pieces cable end caps, and 8 set donuts (24 pieces).
  • Sufficient length of cables: the bike brake wires measure 2 m in length, enough for spare and replacement in daily life.
  • And these cables can be cut into a suitable length for your bikes.
  • 8 Set donuts: these donuts fit to those cables measured 1.2 - 1.5 mm in diameter, please wear them on the cables when using them.
  • Application: the complete cable replacement kit is suitable for road bikes and fits for application on front and rear brake or gear.
  • Protective tool: wearing donuts on the cables is favorable to protecting your bike to from being grinded lacquer.
  • The cable end cap wear on cable end can avoid scratching and keep the cable ends nice and tidy.
Check Stock

Cyclon Shimano MT200 MTB Hydraulic Disc Brakes Set, Left Front 800mm Right Rear 1400mm with Rear PM/is Adapter Aluminum Alloy Hydraulic Bike Brakes, Dual Disc Piston Fit 160mm Rotors Hydrauli Brakes

  • 【Brake Size】: For Cyclon shimano brakes,left side controls the front, right side controls the back, cable of front is 800mm, cable of back is 1400mm, with rear PM/IS adapter..
  • 【Massive Stopping Power】: Shimano hydraulic brakes is the best upgrade kit from mechanical brake, dual-piston oil pressure hydraulic brake caliper helping you braking easier, you can stop with almost no pressure..
  • 【Quiet Braking】: The brake pad of this shimano mt200 hydraulic brakes is made of resin-metal composite pads, not only not damage your rotor, but also not make any noise when braking..
  • 【High Compatibility】: Shimano disc brakes set suitable for most mountain bikes, electric ebike,fat bike,folding bike,scooter (You only need to consider whether the tubing is long enough, package not inclued adapter..
  • 【Easy to Install】: shimano hydraulic brake set uses mineral oil fluid(pre bled), unboxing ready to install and use. And unlike other low-end hydraulic brakes, you can easily buy professional maintenance tools and pad..
Check Stock

BMX Bike Gyro Brake Cables Front + Rear (Upper + Lower) Spinner Rotor Set Kit (White)

  • Gyro cables full set,includes rear cables x2 (upper + lower) and front brake cable..
  • This set includes all components to fit a gyro system to a BMX..
Check Stock

Tektro HD-e350 eBike Hydraulic Disc Brake with 2Pcs 160/180mm Rotor

  • 【Electric Induction Control System】With power cut-off sensor, when braking, the signal is sent to the electronic control system to power off the motor. Cable length 190mm. Please pay attention to check whether the segment of the wiring port matches..
  • right rear 1850mm. This hydraulic disc brake is only suitable for ebikes. 【Oil】Non-corrosive environmentally friendly mineral oil..
  • 【Caliper】 Forged aluminum body. Open system, 2 piston. Weight Front: 302g / Rear: 322g. 【Brake Lever】:Cast aluminum lever & bracket. Two-pieces clamp. 3 finger blade..
  • 【Rotor】Diameter 180mm. Thickness 1.8mm. Weight 150g each. Lightweight polygonal guide design. High heat dissipation and heat resistance. 【Pads】High-performance metal-ceramic composites, low noise resin pad..
  • Note: the rear calipers and lever came in separate pieces so you can route internally. The brake hose were already filled with brake fluid, so you need to be careful not to spill the brake fluid when you install it..
Check Stock