Mssoomm 25mm HGW25 CNC Square Linear Guide Rail Kit 2Pcs HGW25-116.14 inch / 2950mm +4Pcs HGW25 - CA Flange Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project
HGW25 linear guide rail set includes 2Pcs HGW HGR25-2950mm（116.14 inch）linear guide rail and 4Pcs HGW25CA flange type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGH 25 linear rail kit.
The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
The flange square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGW-HA, HGH-HA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you....
Trirock 5-Pack TAN/FDE keymod Picatinny Rail Sections kit fits Key mod handguard Rail Mount System - 5,7,9,11,13 Slots
This keymod rail section kit is designed for fitting keymod handguard rail mount system..
CNC precision machined from high grade quality Aircraft Grade 6061-T6 Aluminum by Mil-Spec hard coated TAN/Flat dark earth finish..
With the protrusions design at the bottom to bolt-on the keymod holes, it could perfectly prevent the rail sections from sliding off while firing..
Built in 1913 Mil Spec picatinny mounting rail allows mounting of most any weaver/picatinny based scope, red dot and other aiming devices..
Curve edge design provides a safeguard to avoid any scratching damage to your rifle ,flashlight, scope or rail section itself. Most important, it can prevent the hands from scratching when operating..
TACO Marine V11-9990BBK60-2 SuproFlex Rub Rail Kit - 60' x 2\ x 29/32\
Industry Standard Base Rail Adapter Rail Adapter for 3" Lift Kit.
Some newer trucks that have deeper beds need additional height on the hitch plate to clear the fender side walls.
PullRite's 3 Lift Kit simply attaches to the SuperRails or Universal Rails in the bed of the truck, and raises the hitch 3 providing more clearance for the truck fender sidewalls.
Refer to manufacturer recommendations to ensure proper fit and installation procedure.
Product 1: Function: This exclusive track saw track connector kit conveniently helps you to align your saws, while connecting one guide rail to another guide rail.
Product 1: Premium quality: Made from professional grade extruded aluminum for high performance use, long lasting durability and dependable rust resistance for all of your track saw applications and woodworking projects.
Product 1: Compatibility: The 55” GUIDE rails is compatible with Makita plunge saw and Festool track saws.
Product 2: Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cuts.
Product 2: Create 45-degree bevel cuts in boards up to 1-5/8 inches thick.
Product 2: Perfect for ripping boards or for performing internal plunge cuts.
Product 2: Includes a 6.5-inch 24-tooth carbide-tipped blade (165 mm) with a 20 mm arbor.
Whelping Box for Dogs | Veterinarian Approved | Large Medium Small Dogs Puppies | All Breeds (L 48"x48"x18" White)
... ✅ EASY TO ASSEMBLE- The PUPez Whelping Pen is super easy to assemble. Everything is included with your purchase. Requires only 1 person to assemble and disassemble in just a couple of minutes..
✅ ADJUSTABLE DOOR &*BONUS* PUPez PUPPY PROTECTOR RAIL INCLUDED- Every whelping box has an entrance door with an adjustable height. This allows the mother to come and go safely as she pleases while keeping the pups secure. Also includes a 360 degree puppy protector rail (“pig rail”) to keep your puppies safe and secure. The puppy protector rail is essential during birthing to ensure newborns have the protection they need..
Haitengwen Tactical Flashlight Keymod Light with Integrated Rail Mount
Rail Mounted Tactical Flashlight Keymod - Integrated flashlight and mount, middle tube & rail clamp as one module seamless (no glue).
prevent crack and fast install to keymod rails.
Versatitle assemble ways - middle rail mount tube has exact same threads on 2 sides, support reverse installation.
slight offset keymod mount flashlight more flexibility to mounted on key mod rail systems.
Compatible for key-mod rails - flashlight with mount unremovable, directly mounted to keymod rails, enhanced key-mod rails screws of heavy duty steel.
Bright 500 Lumen Tactical flashlight one mode - black flashlight adopts high efficient LED, on/off single mode, airgrade aluminum 6061-T6 body of matte black finish, light up 137-182 yards and constant 4.5 hrs runtime.
UOHGDPY DIN Rail Terminal Blocks,Universal Compact Wire Wiring Connector (40 pcs connectors+4 pcs Article in Parallel+4 pcs Digital Identification+2 pcs Fixed clamp+40 pcs Screw)
【Easy to Use】The patented design, different from the ordinary rail connector, does not require the tedious tightening of screws, just insert the rail terminal into the 35mm iron and aluminum DIN rail, lift the orange clip, insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time..
【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 40pcs 12AWG terminal blocks, 4pcs connection bar, 4pcs digital identification, 2Pcs Fixed clamp,40pcs screws, 2pcs end stopper bracket and a transparent storage box..
【Universal Compatibility】 This Wire Connector is suitable for solid and flexible wire. Connect any combination of solid, stranded, and flexible copper wires. Suit for solid wire 0.08-4.0mm² /28-12 AWG, flexible wire 0.5-2.5mm² /20-14 AWG. It is widely used in distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery etc..
【Premium Quality】Terminal blocks, high quality brass metal body and the best flame retardant insulating material modified nylon PA66 shell, it has a long life, no corrosion, anti-aging, 4KV and shock resistance, strong structure firmly locked to DIN rail..
CHR 4 Steps Outdoor Hand Rails for Steps, Black Wrought Iron Handrail Kit (3-4 Steps, Handrail)
Railings for Outdoor Steps- This Iron Stair rail is designed to be a hand rail outdoor (also great replacement for wooden handrails)..
DIY Iron Handrail with Complete Installation Hardware & Tools- Designed to be installed yourself!.
Versatile & Modular Installation- Can be used as outside hand railing, outdoor handrails, stair rails, hand rails for stairways, front porch hand rail, that can be added.
Add-On Railing & Attachments Available- While the holes are pre-drilled for attachment, the top rail and middle rail can also be shorten as needed. In addition, steps to wall railing piece is also available for a continuous run.
Note: The distance between post is 3 feet (intended for 3-4 steps)..
Bugleman Offset Fiber Optics Flip Up Iron Sight 45 Degree Flip-up Front and Rear Sights with Red and Green Fiber Sights Compatible for Picatinny Weaver Rail
❖【1/2 MOA elevation & Simple to Flip up】1/2 MOA elevation Milled Premium T6-6061 Aircraft Aluminum Alloy 45 Degree Offset Flip Up Front and Rear Sight with a simple press the spring load button. Low-profile sights only extend 2" above top rail, don't interfere with primary optics or military IR illuminator /laser sight. Ambidextrous sights easily and securely mount to Picatinny rails..
❖【Dual Front Sight Adjustment Tool Included】A2 Front Sight is completely adjustable for Elevation. Dual Front Sight Adjustment Tool Included! This tool has dual ends to work with both 4 and 5 prong front sights ( A1 / A2 Style ) Very well made solid Steel construction. It sells for $10 by itself on Amazon!.
❖【Rear Sight - Two Mode & Precise Aiming】Switch between CQB and Precision by dual aperture design. With the scale mark on the rear sight, you can rotate the knob for a proper aiming position by simple windage adjustment..
❖【Durable & Lightweight & Solid】Precision Machined Out of Premium T6-6061 Aircraft Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, High Quality, Build No Wobble, Offer Durable & Lightweight & Solid Safe Performance In The Field. Especially designed for any hunting or tactical rifle with Picatinny Rail or W....
NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera
...venting QR plate from removal accidental. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
The 15mm rod riser clamp (with 15mm rods in vertical and horizontal) is adjustable quickly in height or both front and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw.
