DTECH DB9 RS232 Serial Cable Male to Female Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (1.5 Feet, Black)
1.5ft male to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
standard shielded DE9 rs232 cable male to female with AL foil.
DB9 female to male connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
1.5 feet short null serial adapter m/f for hooking up PC laptop to some old RS232C equipment like PTZ, scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Antibreak Inpa K+CAN K+DCAN OBD2 USB Interface Switch FT232RQ Cable OBDii for BMW
Antibreak Inpa K+CAN K+DCAN OBD2 USBWINDOWS ONLY: INPA cable Runs on Windows XP/7/8/10. INPA OBDii cable Made for INPA, EDIABAS, NCSexpert, NCS Dummy,....
INPA OBDii cable Top-quality long INPA OBDii cable interface cable Inpa K+CAN K+DCAN OBD2 USB with FTDI 232RL / 232RLRQ chip for full diagnostic and....
Inpa K+CAN K+DCAN OBD2 USB FLIP SWITCH FOR K-LINE AND Inpa K+CAN K+DCAN OBD2 USB DCAN: Inpa K+CAN K+DCAN OBD2 USB 2-in-1 interface functionality. Inpa....
Inpa K+CAN K+DCAN OBD2 USB WINDOWS ONLY: Inpa K+CAN K+DCAN OBD2 USB Runs on Windows XP/7/8/10. Inpa K+CAN K+DCAN OBD2 USB Made for INPA, EDIABAS,....
Inpa K+CAN K+DCAN OBD2 USB Note: The Inpa K+CAN K+DCAN OBD2 USB diagnose software needs a special program to Inpa K+CAN K+DCAN OBD2 USB work properly.....
Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
BN-880 is suitable for Open source flight controller, not for flight control with SCM.
Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it.
DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
When you use it for Raspberry Pi, there is no driver needed but you need to install software.
DTECH DB9 9 Pin Serial Cable 6ft Male to Male RS232 Straight Through
9 pin male to male adapter connects your computer to device with RS-232 compatible (COM) interface (NOT VGA cable for computer to monitor).
Serial cable male to male DB9 connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
It is pin to pin wired as a DE9 serial Straight Through cord (pinout :1-1, 2-2, 3-3, 4-4,......, 8-8, 9-9, G-G).
6 feet short serial adapter DB-9 cable for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Mettler Toledo PS60 150 LB Shipping Scale with ABS Platter GEOCAL Calibration, RS232 Computer Interface for Use with Carrier Manifest Software
150 pound capacity for parcel weighing — Ideal for Carrier Manifest Systems.
GEOCAL Calibration Compensation — Ensures Local Accuracy, Multiple platter options for flexibility.
NTEP Approved — insured accuracy and legal for commercial applications.
RS232 Computer Interface for use with Carrier Manifest Software, Stainless Steel Platter, Operates from 14º to 104º F.
AC Power (Adapter Included), 6ft USB Cable Included. RS232 Serial Cable 6ft P/N 16317400A and Power Supply 6ft P/N 72205982 Optional and Sold Separately.
DTECH DB9 to RJ45 Serial Adapter RS232 Female to RJ-45 Female Ethernet Converter Compatible with Standard 9 Pin RS-232 Devices
A simple, cost effective solution to process serial data communication between RS232 COM port devices over inexpensive cat5 cat6 RJ45 network cable.
DB9 female to RJ45 modular adapter converts DB9 female connector into an RJ45 female connector (DB9 female - RJ45 Female pinout: 1-1, 2-2, 3-3, 4-4, 5-5, 6-6, 7-7, 8-8, 9-x).
A pair of DB9 to RJ45 socket coupler can be used a extender to extend rs232 serial signals up to 65ft.
Bi-directional DB-9 female to RJ-45 female converter comes with thumbscrews for easy and secure connection.
(Please be noted it's NOT 15 pin VGA video port) It's compatible with Standard 9 Pin D-sub RS-232 Devices e.g. computer laptop, printer, modem, router, PDA, POS device, digital CNC machine tool, Barcode scanner, etc..
DIYmalls BN-180 GPS Module TTL Dual Glonass GPS + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D Betaflight Flight Control
BN180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to....
When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold....
Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
BN 180 gps doesn't have flash and compass. If you need it, please buy bn-880 gps module via "Visit the DIYmalls Store".
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
HDMI Switcher 4 X 1 by Orei Ultra HD Switch Audio Extractor Supports upto 4K 2K @ 60Hz 1080P IR Remote Control
2.0a (18Gbps) HDMI 4 Input into 1 output Switcher - Supports highest video resolution up to 4K x 2K at 60Hz), EDID bypass, full 3D and HDCP2.2....
Supports PCM, Dolby True HD, DTS-HD Master Audio up to 7.1 Ch. Digital and analog Audio output. Input port auto switching. Automatically switches to....
Input: 4 HDMI ports, 1 IR receive port and 1 RS232 port 3.5mm (DB9 Female to 3.5mm serial cable sold separately) output: 1 HDMI port and 1 3.5mm....
Supports Audio Return Channel (ARC), Supports RS-232 (DB9 Female to 3.5mm serial cable sold separately).
Includes - 4x1 Switcher, power adapter, 38kHz IR RX cable, 3.5mm to optical converter, IR remote, operation Manual, 1 Year warranty.
USB to Serial Adapter, BENFEI USB to RS-232 Male (9-pin) DB9 Serial Cable, Prolific Chipset, Windows 10/8.1/8/7, Mac OS X 10.6 and Above, 1.8M
HOW IT WORKS: BENFEI USB to RS232 DB9 Male Serial Adapter is designed for connecting to serial devices such as DB9 equipped serial modems, ISDN Terminal Adapters, digital cameras, label writers, palm PCs, barcode scanners, PDAs etc through USB port with 1Mbps data transfer rate.
CONNECTORS: With standard USB Type A Male to standard Male 9-pin DB9 RS-232 serial connector.
Please pay attention: it's not the USB to VGA cable or USB to DB9 cable. If you need USB-VGA, please refer to our detail page.
CONDUCTOR & SHIELDING: Tinned Copper Conductor(Wire guage#24#28) and triple shielding ensure the best data transfer rate. Powered by USB port, no external power adapter required. Simple installation, plug & play after one time driver installation.
WIDE COMPATIBILITY: USB to RS232 adapter is with Prolific PL-2303 Chipset for widest possible compatibility with Windows 10, 8, 7, XP, Vista, 2000, 98, MacOS8 or higher, Linux 2.4.0 and later, and other platforms..
18 MONTH WARRANTY: Exclusive BENFEI Unconditional 18-month Warranty ensures long-time satisfaction of your purchase.
Friendly and easy-to-reach customer service to solve your problems timely.
