DICMIC 496 Fuel Tank Filter Assembly with Wrench Replacement for Gasoline and Diesel Water Separate 30 Micron Max 25 Gpm 150 Psi with 1” NPT Top Cap Replace# B10-AL
[COMPATIBLE WITH FUEL TYPE] Fits common fuels such as unleaded gas, diesel, fuel oil, up to 20% biodiesel and related additives..
[FUEL FILTER ELEMENT] Keeping a clean 496-5 filter in your vehicle can reduce damage done to your engine and other fuel delivery components. 30 microns, provide high flow rates and superior filtration efficiency, protect fuels from particles such as rust, sand, dirt and water. With protective sheet to prevent the filter element from being destroyed or deformed by pressure..
[TOP CAP] With 1" NPT pipe fittings inlet and outlet marked at the top of the cap..
[HYALINE BOWL] Use 495-4 fuel tank filter bowl, makes it easy to visual monitor the fuel flow, the fuel flow will slow down when you need to replace the element. Drain valve installed at the bottom to drain water..
[FEATURE] Additional matching wrench and tape for easy installation and replacement. Flow rate max 25 gpm. Working pressure up to 150 psi. Gravity flow rate is approximately 5 gpm..
Fits: Harley Davidson Touring Twin Cam 99-13, Softail Twin Cam 00-13, Dyna Twin Cam 99-13, Touring Evo 82-98, Softail Evo 84-99, Dyna Evo 91-98, and Sportsters 85-13.
Buell M2 Cyclone 97-02, S3 Thunderbolt 95-02, X1 Lightning 96-02 and more.
Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200 percent more filter area in many cases.
The Flo stainless filter catches items down to 35 microns, which is about 3 times better than most good paper or brass filters.
Unlike glued paper filters, the Flo Oil Filter pleat seam is welded and able to withstand up to 600 degrees.
This filter maintains consistent flow under all conditions including extreme heat, the presence of water, and cold start ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine.
Fuel Vavle Petcock Shut Off Tank Switch Fits for Yamaha TTR 90 125 225 230 250 Timberwolf Bear Tracker Big Bear 250 Grizzly Raptor Warrior Wolverine 350 Moto-4 Kawasaki KLF 300 Suzuki Quadsport 400
... manufactured in strict compliance with OEM standards, rugged, durable and easy to install. 100% brand new and durable petcock made by Vavle Expert, guarantees high performance, excellent air tightness, better fuel flow rates and longer working life..
【Package Info】 1 x fuel valve, 1 x meter fuel line, 1 x fuel filter, 4 x Spring Clips. Shop with 4Tune Garage, you get free gifts including high quality pure rubber fuel line and fuel filter!.
【Guarantee】Hassle-Free Return and Money Back, Shop with Confidence. All parts are strictly tested and quality controlled prior to shipment. Even so, we provide life time warranty and full refund for any quality issue..
AFWFilters Iron Pro 2 Combination water softener iron filter Fleck 5600SXT digital metered valve 64,000 grain, 64k for whole house
Water softener, iron filter, all in one! high flow for whole house use!.
64,000 grain capacity, fine mesh resin designed for high iron removal & long life.
Fleck 5600SXT digital metered valve for efficiency and ease of use, 5 year warranty!.
Removes hardness up to 75 gpg, Iron up to 6-8 ppm range, Manganese up to 6 ppm, sediment, sand, rust.
*tank color may vary*, this comes complete with brine tank, DIY instructions, bypass valveDescriptionChoose the best for hard water and iron removal Eliminates Red Staining from iron Eliminates scale from hard water Removes Manganese Meter Based Regeneration Fleck 5600SXT Digital Control Head 1" Bypass Valve 12"x48" Structural USA Tank* Treats up to 16GPM Special fine mesh resin made to last longer in the presence of iron and filter better! Control Head - 5 year warranty Tank - 10 year warranty 30-day Satisfaction Guarantee DIY Installation Instructions Free Phone and/or email Tech Support Eliminate the hard water that causes scale build up and iron that causes red staining with a single system! Eliminates Scale Buildup - Hard water causes a white flaky build up (called scale) to form on appliances, faucets, and just about anything that it comes in regular contact with. By removing the hard water, this scale build up....
PC Racing PCS4C Stainless Steel Polished Aluminum Flo Oil Filter , Red
The stainless filter catches items down to 35 microns, which is about 3 times better than most good paper or brass filters.
polished stainless steel reusable oil filter.
Fits for Harley Davidson Touring Twin Cam 99-13, Softail Twin Cam 00-13, Dyna Twin Cam 99-13, Touring Evo 82-98, Softail Evo 84-99, Dyna Evo 91-98, and Sportsters 85-13.
Buell M2 Cyclone 97-02, S3 Thunderbolt 95-02, X1 Lightning 96-02 and more.
Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200 percent more filter area in many cases.
This filter maintains consistent flow under all conditions including extreme heat, the presence of water, and cold start ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine.
Exergy Performance CP4.2 Inlet Metering Valve (FCA/MPROP) Fuel System Saver Improved Stock Inlet Metering Valve E05 10505 Compatible with 2011-2016 Chevy Silverado/GMC Sierra 6.6 LML Duramax Diesel
...tem Saver Valve screen is rated at 25 microns and is wrapped in two layers. This improved micron rating and double wrap construction will do a much better job of keeping debris from entering the rest of the fuel system. It is also constructed in a manor where it will not be able to tear or de-laminate from the filter housing..
Another benefit to the screen is the fact that it will load up quicker than the factory screen in the event of a pump failure. This will choke off the valve sooner, which will bring the truck out of service and shut it down in a shorter amount of time. This is all positive for improving the chances injectors won't need to be replaced when a pump has failed..
Exergy has also flow tested the valve with the upgraded filter and there is no measurable loss of pump performance with the finer screen, even with a 10mm stroker CP4 pump at 4500 RPM. The screen and housing are constructed from stainless steel for corrosion resistance. And, as always, you can trust that Exergy products have been properly de-burred and are assembled using appropriate processes to ensure proper cleanliness..
mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)
...deal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
however, depending on package requirement it can be modified to 3/8 inch. - Scale free filters can also be added to mist systems to prevent clogging of nozzles due to hard water..
Tubing - ¼ Inch OD Tube - Rated for 1500 PSI - Nylon Tubing - UV Treated - Available in Black, White, Beige and Grey Colors.
Fittings - ¼ Inch - Push Lok – Push to Connect - Nickel Plated - Rated for 2000 PSI - Re-Usable - Misting Tee comes with 10/24 threads - End Plug – Simply connect it to the misting Tee. MC13040-MC13041.
