Best Fuel Injection Element

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....

Nitrile tube that is spiral reinforced for enhanced durability.
NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments.
Vacuum rating of 24 in/Hg for sizes less than 1?2 in I.D., and 10 in/Hg for sizes 1?2 in to 3?4 in I.D. at ambient temperatures.
Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications.
Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.

Nitrile tube that is spiral reinforced for enhanced durability.
NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments.
Vacuum rating of 24 in/Hg for sizes less than 1/2 in I.D., and 10 in/Hg for sizes 1/2 in to 3/4 in I.D. at ambient temperatures.
Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications.
Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.

Precisely control：The fuel injector is a precision device with very high processing accuracy, which requires a large dynamic flow range, strong Anti clogging and anti pollution capabilities, and good atomization performance. The fuel injector receives the fuel injection pulse signal sent by the ECU, and precisely controls the fuel injection volume..
Fitment:Fuel Injector with OE number of 89060440, ideal replacement for Chevy Pickup 5.0L 5.7L..
Good sealing：The internal sealing ring is made of hig.

Labor saving design: the fuel line clip removes fuel lines quickly.
Simple: very simple to connect or disconnect fuel injection fuel lines or plugs.
Great angle and max width with great performance:push in clips for coolant, fuel, def lines, or for filter removal.
A must-have for diesel technicians: works great for quick connect def lines and fuel lines.
Tweezers: for replacing the orings that are inside the couplers for the fuel lines.

Application: Fuel pump pressure tester is suitable for various gasoline engines such as cars, trucks, SUVs, motorcycles, ATVs, RVs (except Bo-sch, CIS Je-tronic, GM car throttle body systems), not suitable for diesel high-pressure injection pumps or direct injection engines..
Fittings & Hoses: M8/M10/M12/M14 adapter for corresponding fuel Test port on rails.
15"L hose for direct connection to 1/4" SAE standard US valve on the fuel pump.
Aluminum tee helps in-line splicing between the fuel pump and engine on most vehicles..
Fuel Pressure Gauge: A large 3-1/2" dial protected by a rubber cover, a 0-140psi/0-10bar range, and a two-color coded scale for easy reading..
Material: Made of high-quality brass, steel, rubber, plastic, provide accurate reading and long-lasting products..
Storage: Nice carrying case and a well-made tool, great for DIY or even professional use..

Removes water from gasoline & diesel fuel,.
Restricting fuel flow when it is time to replace the element,.
May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination.
Water-Block filter removes water from gasoline and diesel fuel.
Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element.
Removes microscopic particles (17 microns) of rust, sand, dirt, scale, and lint.
Zinc die-cast top cap with 3/4″ NPT pipe fittings.
See-Through bowl allows for visual monitoring of fuel flow.

FITMENT: 2005-2010 for Hino for 145 4.7L,1998-2002 2004 for Hino for FF3020 8.0L,1984-1985 for Hino for FG22 9.4L, 1990-1991 for Hino for GC17 6.7L,....
HIGH STANDARD ACCESSORIES: Bringing high-performance parts to customers is our main purpose, our production department learns to adopt advanced....
PREIUM PERFORMANCE:INEEDUP injectors are manufactured to OE specifications to save fuel while accelerating vehicle starts, promoting smooth engine....
NECESSITY: The blockage of the fuel injector may cause the fuel injection to be unsmooth, and the fuel injector cannot achieve the fuel injection....
PAY ATTENTION: In order to ensure that you are buying the car parts you really need, please double check your vehicle's year, model, engine, and liter....

FITMENT: 2005-2010 for Hino for 145 4.7L,1998-2002 2004 for Hino for FF3020 8.0L,1984-1985 for Hino for FG22 9.4L, 1990-1991 for Hino for GC17 6.7L,....
HIGH STANDARD ACCESSORIES: Bringing high-performance parts to customers is our main purpose, our production department learns to adopt advanced....
PREIUM PERFORMANCE:INEEDUP injectors are manufactured to OE specifications to save fuel while accelerating vehicle starts, promoting smooth engine....
NECESSITY: The blockage of the fuel injector may cause the fuel injection to be unsmooth, and the fuel injector cannot achieve the fuel injection....
PAY ATTENTION: In order to ensure that you are buying the car parts you really need, please double check your vehicle's year, model, engine, and liter....

Dual Dial For Accurate Reading, With A 140 PSI /10 Bar Scale.
Deluxe Manometer Fuel Injection Pressure Tester Gauge Kit.
Set comes in a specially designed molded case to make storage easy and organized..
A time saving quick coupler connection at the end of he gauge hose makes a speedy and efficient couple possible with most adapters..
The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide!.