WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided
1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal
20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
No Worry To Buy: Excellently Sealed, no leaking. We of....
5/16 Fuel Hose 8mm Transmission Oil Cooler Hose High Pressure Fuel Injection Hose For Conveying Gasoline, E-85, E10, Diesel, Oil, Coolant, and Bio-Diesel Fuels In Cars, Trucks, Buses, Etc
PREMIUM MATERIAL◀The 5/16 fuel injection hose is made with high-quality Nylon, thus preventing it from rusting and corrosion. The 5/16 fuel hose also has a wall thickness of 3.05mm..
BETTER TRANSIMMISION◀A perfect fuel line for vehicles with engines that need a large tube diameter. Its 5/16 inch diameter helps in better flow and intake of fuel. This 5/16 fuel line hose ensures that the car engine is able to process the fuel in the best possible state. The 5/16 transmission cooler hose comes as a roll of 10 feet long enough for a wide range of applications..
QUALITY TESTED ◀The tube is double annealed making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs. Oil resistant, temperature-resistant, and ethanol tolerance. Hold up to -68°F to +212°F, a lot stronger to heat and extreme circumstances..
BENDABLE ◀The 5/16 fuel line enables you to make sharp bends without kinking, minimum bend radius up to 4.7inch(120mm). The 8mm fuel injection hose is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and ba....
20 Ft 6AN AN6 (3/8\) Universal Braided Stainless Steel CPE Oil Fuel Gas Line Hose
Application for Racing Fuel, Pump Gas, Fuels with Ethanol, Alcohol Based Fuels, Motor Oil & Coolant etc.
Length:20 Ft , Inner Diameter: 8.7 mm (0.342"), Outside Diameter: 13.89 mm (0.546"), Universal Accessory, Easy to Operate.
Premium Synthetic Hose, Nylon and Stainless Steel Wires, Good Quality and Durability, Working Temperature: -40F to 248F (-40°C to + 120°C) under most operating conditions.
Working Pressure:1015 PSI - Burst Pressure: 6090 PSI.
【Great upgrade】Because the duramax is not equipped with a factory lift pump , it is possible to introduce extra air and impurities into the fuel, resulting in changes in the working conditions of the engine, incomplete combustion, and reduced power, thereby shortening the life of the engine. It is recommended that you purchase this kit to upgrade.It meets or exceeds the oem standard, and has been tested in the factory, perfectly matched with the original car, and can be installed directly..
【High Quality】Made of reinforced high-quality material, wear-resistant, high-temperature resistant, and long service life..
【Fuel Lift Pump System】2 micron filtration rating, effectively removes water, air and debris from diesel fuel, extending the life of the injection system. With a rated flow rate of 165 gallons per hour, superior fuel delivery ensures smoother engine idling..
Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Application: This fuel pressure tester diagnoses variability problems caused by poor fuel pressure. Used to check if fuel pump is defective or inconsistent in pressure flow.
Duarablity: Made of high quality material (Brass, Steel, Rubber, Plastic), rugged and long-lasting.
Solid brass connectors. Excellent air-tightness and avoid any leaking.
