Best Fuel Line Retainer Clip

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

  • HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
  • CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
  • LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
  • WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
  • EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..
Check Stock

KIPA 5/16\ Inch ID Fuel Line Set - 2 Meter / 6 Foot 5/16\ Inch Fuel Line + 4 Pcs 5/16 Inch Fuel Filters + 20 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines

  • ...te reinforcing layer, The inner and the outer pipe are made of fluoro elastomer and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance, petroleum-resistant nitrile tube with a covering that resists weathering, ozone ,heat and can be used for ethanol-laced fuels and diesel fuel. This fuel hose is SAE 30R9-rated that will withstand up to 120 psi and 300 degrees..
  • Fitment: includes 6 Feet 5/16" Fuel Line.
  • 4Pcs x 1/4 Inch & 5/16 Inch Fuel Filters.
  • 20 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. They could be used widely for update your fuel line system, such as outboard boat system, motorcycles, ATVs, UTVs, Go Kart, Auto Vehicle's. Fuel line kit could also be used widely on lawnmower, Generator, power equipment and small engines Tool Etc..
  • Perfect fuel filters, They could effectively Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor & Fuel pump & Fuel Tank, transmiss Steady clean fuel flows and keep engines Running at the top performance...
  • Hose Clamps: They are Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage, make your fuel lin....
Check Stock

799866 Carburetor Replacement for Briggs Stratton 22' Toro 6.5 6.75 7.0 7.25 HP Recycle Mower 190cc 796707 794304 790845 799871

  • High Class Quality, Very Durable, Good Working Condition, Easy To Install..
  • Carburetor Replacement for Briggs & Stratton 129700 129800 123H00 123J00 124H00 125H00 12G700 12G800 12J700 12J800 12J900 12L800 12U800 12V800 12C700 12C800 12D800 4-Cycle Small engine and Briggs Stratton 124L02 126M02 124L05 124L07 124T02 engine..
  • 799866 Carburetor Replacement for Briggs & Stratton 799866 796707 794304 790845 799871 carb..
  • Package Listing: 1x Carburetor 6x fuel clip 1x gasket 1x o-ring 1x Air Filter 1x Spark Plug 1x Fuel Filter 1x Fuel shut off valve 1x Fuel line 1x Primer Bulb..
  • Please compare your carburetor with the pictures and make sure this part fit your models before you purchase.(Tips: press "Ctrl + F" to help you quick locate the model you are looking for).
Check Stock

25PCS Fuel Line Disconnect Tool Set & Master Quick Disconnect Tool Kit for AC Fuel Line Transmission Oil Cooler Line Disconnects,Compatible with Most Ford Chevy GM Models,Blue

  • [WIDELY USE AC & FUEL LINE DISCONNECT TOOL SET]-- A comprehensive disconnect tool set for separating automotive ac hose and fuel lines, work for most fuel lines, air conditioning lines , air and oil pipes , radiator and heater hoses , simple push-on & pull-off action. Widely applied for domestic and foreign hoses and automotive lines, compatible with Most GM Ford Dodge Mazda and Chrysler..
  • [DIFFERENT COMPONENTS & SIZES FOR MUTI-USES]--The fuel line removal tool set includes 6 pcs of color-coded ac disconnect fuel line removal tool set , 7 pcs of removing ac & fuel line disconnect fittings , 4 pcs of quick ac fuel line remover , 2 pcs of oil cooler line remover as well as scissor fuel line disconnect tool , cf fuel line w/hair pin connector and rubber band. Various common tools are easy for operation to cover different purposes..
  • [DURABLE MATERIAL & High Quality]--The 25 pcs fuel line disconnect tool kit made of high-quality aluminum alloy and plastic steel is durable . Each tool , even the carrying plastic case is designed and tested for strength and longevity..
  • [HANDY DESIGN & EASY STORAGE]--All cooler line removers are set in unique and organized locations in a blow-molded case for avoiding misplacing your tools between uses, while the outside handy c....
Check Stock

Lisle 39210 Main Fuel Line Disconnect

  • GET THE JOB DONE: The ABN | Master Deluxe AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines.
  • FITS YOUR VEHICLE: Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
  • Measure your application to ensure correct fitment.
  • EASY TO USE: Each fuel tool is color-coded by size for easy identification.
  • Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
  • Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job for easily removal.
  • BUILT TO LAST: Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
  • Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released.
  • PACKAGE CONTENTS: Package contains (6) fuel line pliers transmission tools – Red 5/16-inch (8mm), gold 3/8-inch (9.5mm), dark gray 1/2-inch (13mm), blue 5/8-inch (16mm), black 3/4-inch (19mm), silver 7/8-inch (22mm).
Check Stock

1/4 inch Fuel Hose Line, Gas Petrol Fuel Line Fuel Line Assembly 3 Feet for Motorcycle Dirt Pit Bike ATV (Yellow)

  • 【 Wide Application 】– Fits for most small engine, can be a perfect replacement fuel line and fuel filter for chainsaws, blowers, weedeater whackers trimmers and other engine machines.
  • 【 Premium Abrasion Resistant Quality 】– This petrol fuel line is ideal for the transfer of petroleum products. Excellent fuel line for small engines. Great for carburetors! High Quality Petrol Fuel Line, Oil and Gas Resistant, Corrosion Resistant, Resists Swelling and Hardening, low temperature..
  • 【Universal Fuel Line Design】– Universal fits for most motorcycle, such as for Honda, Suzuki, Yamaha, etc.Length: 1m / 39.37″/ 3.28 ft.
  • Outside Diameter: 1/4 inch/7mm outside diameter.
  • 【 1/4 inch Fuel Hose Line 】– The outside diameter of the petrol fuel line hose is 1/4 inch/7mm.
  • 【 What You Will Get 】– We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply.
Check Stock

Bitray Glass Retainer Clips Kit, Glass Door Retainer Clips Plastic Transparent Glass Corner Buckle Panel Retainer Clips Mirror Clips for Cabinet Door (Pack of 100)

  • Package Includes - 100pcs x Glass Retainer Clip.
  • Material - Made of premium plastic which are sturdy and durable, not easy to break or deform..
  • Easy to Install - Drill several holes on walls, cabinets or doors at proper positions, fix glass and clips, then tighten the screws..
  • Wide Application- These plastic retainer clip kits can help you attach glass, mirrors or other screens on dresser, wardrobe, bookcase, cabinets, doors, walls and other places easily..
Check Stock

AloneGoer 6pcs Universal 1/4 Fuel Filter with Line Clamp for Motorcycle Dirtbike ATV Moped Scooters Kawasaki Kohler Lawnmower Tractor

  • Universal Fuel Filter Motorcycle Dirtbike ATV Moped Scooters, fits for all Outdoor Power Equipment, small non fuel injected cars and motorcycles.
  • Replace Kawasaki Kohler Small Engines Lawnmower Tractor and any fuel line of same size as the filter lines..
  • Fuel Filter Size: 1/4" (6mm-7mm) In-Line.
  • Package include: 6x fuel filter + 12x clamp + 4feet fuel line.
Check Stock

12 Pieces Brake Line Clips Metal Brake Line Retainer U Shaped Brake Hose Bracket Parking Brake Cable Clip Replacement Hose Retaining Clip Brake Hose Lock for Cars Trucks Vehicles Parts

  • Package you will get: the package includes 12 pieces of metal brake line clips, well made and reliable, enough for you to replace your old or rusted one and apply to where you need.
  • Meanwhile, you can share them with family, close friends, neighbors.
  • Quality material: these car brake hose locks are made of quality steel, coming from exquisite workmanship, sturdy and serviceable, resistant to rust and corrosion, will not deform or break when installing, also not easy to fall off, which can serve you for a long time, you can rest assured to use.
  • Easy to operate: this hose lock retainer clip is easy and convenient to install, you only need to attach the brake hose to a bracket connected to the steel brake line, saving you time and effort nicely.
  • Extensive applications: these replacement hose clamps have a wide range of applications to use, suitable for cars, trucks, SUVs, motorcycles and hoses with the appropriate size.
  • And they are portable and lightweight, nice for your storage and carry.
  • Size information: the brake hose retaining clip measures approx. 28 x 27 mm/ 1.10 x 1.06 inches (length and width), and the middle section is about 13 mm/ 0.51 inch, please make sure it is the size you need before purchasing.
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock