✊【Easy to Use】Our products is a high-quality PLC Programmable Controller, and built to strict quality control standards, as a artistic appearance and simple structure, it all 10 ports use photoelectric isolation to transmit signals, which can effectively filter out various interferences, the input supports positive/negative triggers, very friendly to novices..
✊【Good Performance】Our products has Using 32‑bit industrial processors, small PLCs suitable for industrial automation applications. Besides, it has high‑speed counter function, comes with analog input and output channels, supports 2 channels of 100K high‑speed pulse output..
✊【Strong Applicability】ThisPLC Programmable Controller has Compatible with most commands of FX3U, support for GXworks2/GxDeveloper programming, with independent programming port, which can help you in many areas..
✊【Wide Application】Our power circuit adopts anti‑reverse and anti‑surge design, which is widely used in the signal acquisition and control of industrial field equipment..
✊【Use it with Confidence】You can use our product with confidence, this lathe keeps guaranteed quality after many inspections before leaving the factory..
uxcell 2Pcs Red Indicator Light AC/DC 110V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects
RED LED indicators drove with AC/DC 110 VOLT.
Industrial standard 22mm (7/8") mounting diameter.
Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
uxcell 3Pcs Red Indicator Light AC/DC 110V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects
RED LED indicators drove with AC/DC 110 VOLT.
Industrial standard 22mm (7/8") mounting diameter.
Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
uxcell 4Pcs Yellow Indicator Light AC/DC 110V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects
YELLOW LED indicators drove with AC/DC 110 VOLT.
Industrial standard 22mm (7/8″) mounting diameter.
Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
uxcell 10Pcs Red Indicator Light AC/DC 110V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects
RED LED indicator lights drove with AC/DC 110 VOLT.
Industrial standard 22mm (7/8") mounting diameter.
Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
uxcell 6Pcs Red Green Indicator Light AC/DC 24V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects
RED + GREEN LED indicator lights drove with AC/DC 24 VOLT.
Industrial standard 22mm (7/8") mounting diameter.
Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
uxcell 2Pcs Red Green Indicator Light AC/DC 110V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects
RED GREEN LED indicator lights drove with AC/DC 110V VOLT.
Industrial standard 22mm (7/8") mounting diameter.
Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
PWM Pulse Generator, DROK Dual Mode Adjustable Function Generator DC 3.3-30V 1-150kHZ 1-9999 Variable Pulse Width Frequency Duty Cycle Square Rectangular Wave Signal Generator Module with Case
PARAMETER — working voltage DC 3.3-30V.
DUAL MODE — the signal generator has 2 modes, PWM mode (default) & pulse mode..
APPLICATION — the signal generator module can be used to generate square wave rectangular wave signals for controlling DC motors or stepper motor driver.
for servo motors, stepper motors, electric jaws, PLC pulses replacement, etc..
PROTECTION — with anti-reverse protection, 5.08mm terminal wiring..
EASY TO OPERATE — the signal generator can control start or stop, it can also connect the external switch to control the output signal ON/OFF..
Fafeicy 12-Channel DC12-36V PLC Signal Amplifier Board Isolation Relay Module Amplifier Board with NPN Input PNP Output
Protection function: The relay can effectively avoid system instability caused by mutual interference, effectively protect the output node of the PLC, ensure the normal transmission of the signal, and thereby protect the relay..
Uses: The relay module can be used to protect the PLC internal relays, which can directly replace traditional relays, reducing maintenance time and cost.
Stable performance: The signal amplifier is made of high-quality electronic components with stable and reliable performance..
Easy to install: It is recommended to design to make drilling and module installation more convenient..
After-sales service: We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
