Best Fully Threaded Nut Set

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

  • 1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
  • 2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
  • 3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
  • 4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
  • 5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..
Check Stock

Dixon TCT30 Iron Style T Cam and Groove Hose Fitting Tank Car Connection 5 Railroad Thread Swivel Nut x 3 30 Degree NPT Male

  • 30 degree bend with two openings for connecting two threaded pipes.
  • One swivel nut end with railroad tank car thread for connecting to male tank car threaded connections and one NPT male threaded end for connecting to NPT female threaded connections.
  • Iron for strength, malleability, and ductility.
Check Stock

RoyceMart M5 x 0.8mm Serrated Flange Hex Locknuts (50 Pack), 304 Stainless Steel 18-8 Lock nut, Finish Hex Lock Nut

  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold.
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down.
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut.
  • Steel is often used in applications where strength is the primary consideration.
Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....
Check Stock

4 Inch Total Lock Caster - Red Polyurethane Wheel - 1/2 -13 x1-1/2 Threaded Stem Set of 4

  • Nylon Lock Nut included with every Caster.
  • Capacity: 300 lbs each / 1,200 Per Set (4).
  • Dual Sealed Precision Bearings for a smoother and quiet operation.
Check Stock

E-Z LOK Threaded Insert for Hard Wood Assortment Kit Brass Thread Inserts 6-32 to 3/8-16

  • THREADED INSERTS FOR HARD WOOD – E-Z LOK Threaded Insert Assortment Kit for hard wood. Brass threaded inserts for putting strong, machine threads in wood..
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts in this thread repair kit provide superior holding power using a proprietary external “knife” thread to slice into the wood..
  • EASILY INSTALLS – The brass metal threaded inserts are easily installed with a screwdriver, bolt/jam nut, or optional drive tool..
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
  • KIT INCLUDES – 10 pieces each: 6-32 (0.375" long), 8-32 (0.375" long), 10-32 (0.500" long), 1/4-20 (0.500" long), 5/16-18 (0.625" long), 3/8-16 (0.625" long)..
Check Stock

Chaya Ophira Plate 20° Quad Skate Plates with Dual Center Mounting (11)

  • DCM for use with Chaya boots -- 6061 Aircraft Aluminum -- Precision machined and laser etched -- Dual Center Mount Technology (DCM).
  • TRUCKS -- 8mm threaded axles -- One-piece pivot cup inserts.
  • 20° Kingpins with Micro-adjustable lock nut -- Jelly interlock SHR PU cushions.
  • 5/8" Adjustable Toe Stop housing - 5mm hex set screw -- Offset toe stop alignment --.
Check Stock

Glarks 120Pcs M6 M8 M10 Brad Hole Tee Nut with Screws Assortment Set Zinc Plated Carbon Steel 3-Hole T-Nuts Furniture Hardware Flange Insert Female Thread for Wood Furniture

  • ♛【Package Include】: This brad hole tee nut set include 30pcs M6 M8 M10 T-nuts, each for 10pcs, which outer diameter is 36.3mm/1.43". As well as 90pcs mounting screws for your installation on wood furniture..
  • ♛【Premium Material】: The T-nuts are made of high-quality carbon steel, it has higher strength. With zinc plated on the surface gives it strong anti-corrosion and anti-rust performance, can be used for a long time..
  • ♛【Stable Flange Base】: Compared with ordinary nuts, three-hole T-nuts have better fastening effects, the screws used for fixing can strongly support the base. so they can be used for heavy furniture..
  • ♛【How to Use】: You need to drill a hole in advance, insert the nut part into the hole, and then fix the nut with self-drilling screw. Finally, install the threaded screw into the nut. Please confirm the size of the nut to be installed in advance..
  • ♛【Widely Application】: These T-nuts can work both indoors and outdoors, and are most suitable for wooden materials. It can be used to install furniture legs for beds, tables, closets, and can also be used to hang chandelier..
Check Stock

Dixon RTCT30 Stainless Steel 316 Style T Cam and Groove Hose Fitting Tank Car Connection 5 Railroad Thread Swivel Nut x 3 20 Degree NPT Male

  • 20 degree bend with two openings for connecting two threaded pipes.
  • One swivel nut end with railroad tank car thread for connecting to male tank car threaded connections and one NPT male threaded end for connecting to NPT female threaded connections.
  • Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304.
Check Stock

Shepherd Hardware 9807 3-Inch Swivel Stem Caster, Rubber Wheel, 7/16-Inch Stem Diameter, 175-lb Load Capacity

  • Nylon Lock Nut included with every Caster.
  • Capacity: 300 lbs each / 1,200 Per Set (4).
  • Dual Sealed Precision Bearings for a smoother and quiet operation.
Check Stock