Best Fuse Links Cylindrical

12-Way Fuse Block With ground, 12 Circuit ATC/ATO Fuse Box Holder with negative bus, Protection Cover & LED Light Indication, Bolt Terminals, 70 pcs Stick Label, For Auto Marine, Boat,With 24 pcs Fuse

  • LED WARNING INDICATOR: this fuse block with negative bus can easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. It is both safe and easy for you to check and replace the blown fuse..
  • WIDE USE: This fuse block holder with ground is suitable for all vehicles with a 10-32 Volt DC power source. So it come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor.
  • widely used in vehicle, car, marine , bus, ship, tanker, subway etc.
  • PREMIUM QUALITY: The 12 way fuse box with ground buss is crafted to perfection with the best quality materials and with special attention to detail so it can be incredibly efficient and durable. The fuse box has LED light indicators and a strong construction for guaranteed results.base:PBT,cap:PC,terminal:Nickel plated copper,screw:Stainless steel,label:PP*70.
  • EASY TO SET UP: No need to worry about getting your fuse box ready to use. This 6 circuit fuse box holder with ground is very easy to install..
  • WITH COVER AND FUSE: Transparent plastic cover with push latch system, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. With 24 pcs Blade fuse 6....
Check Stock

UK5-HESI DIN Rail Fuse Holder Disconnect Terminal Blocks Screw Clamp UK5RD (Without LED indicated, Grey, 10)

  • ✯ Category: Fuse Holder Terminal Block.
  • Type: UK5-HESI. Suitable for various sizes of fuse tubes, such as: 5x20, 5x25, 6x30, etc..
  • ✯ Material: Nylon PA66 Housing, Fire retardant, Flame retardant..
  • ✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
  • ✯ Fuse terminal block for cartridge fuse inserts without indication. The lever-actuated fuse holder makes fuse insertion and extraction safe and easy..
  • ✯ Compact Fuse holder Terminal Block used in control circuit applications..
Check Stock

10 Gauge Fuse Holder - 10 AWG Inline Fuse Holder with 40 AMP ATC Blade Fuses 4pack

  • Heavy duty 10 (AWG) Gauge red color wire Allow you to splice it into any project..
  • Inline fuse holder for ATC/ATO blade fuse..
  • Package included 4 x fuse holder and 4 x 40Amp fuse..
  • Water resistant, This fuse holder comes with cap to seal out moisture..
  • Fuse holder dimension (42x35x13mm),Support up to 40A Standard fuses for 12V..
Check Stock

Nilight 12V Car Add-A-Circuit Fuse Tap Adapter Mini Atm Apm Blade Fuse Holder-10 Pack, 2 Years Warranty

  • Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.
  • Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.
  • Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box.
  • Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity.
  • Package include: 10 x Add-A-Circuit fuse holder, 10 x 15A fuse.
Check Stock

Nilight 12V Car Add-A-Circuit Fuse Tap Adapter Mini Atm Apm Blade Fuse Holder-10 Pack 2 Years Warranty

  • Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.
  • Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.
  • Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box.
  • Superior quality: made from high-quality materials, good bending performance, melting resistance and excellent electrical conductivity.
  • Package include: 10 x Add-A-Circuit fuse holder, 10 x 15A fuse.
Check Stock

Bussmann BP/SL-15 15 Amp Time Delay Loaded Link Rejection Base Plug Fuse, 125V UL Listed Carded, 3-Pack

  • Non Tamp, Dimensions: 1. 83"L x 0. 917"W x 0. 417"H.
  • No-interchangeability prevents installing a higher amp fuse than the circuit was designed for.
  • Has ability to withstand typical motor starting surges.
  • Use in residential or light-duty motor circuits.
Check Stock

Conext Link ANL200-5 Nickel 200 Amp ANL Fuse 5 Pack

  • Includes 1pc WindyNation ANL Fuse Holder + 2pcs ANL 200A Fuses.
  • See Images for technical specifications and dimensional drawings.
  • ANL fuse holder will accept up to a maximum of 2/0 gauge cable.
  • For most applications, the fuse should be sized at approximately 1.30 times the rated power of the device being protected by the fuse.
  • ANL Fuse Holder mounting bolts are 8 mm in diameter. Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt.
Check Stock

36 Pieces Fuse Taps Set 4 Types 12V Adding a Circuit Adapter and Fuse Kit Fuse Holder Mini Low Profile Tap Adapter for Cars Trucks Boats

  • Package include: you will receive 3 pieces 12V mini fuse taps, 3 pieces 12V micro fuse taps, 3 pieces 12V small fuse taps and 3 pieces 12V medium fuse....
  • Reliable material: the adding a circuit adapter and fuse kit is mainly made of nylon and tin plated copper, which is durable and reliable to use, good....
  • Security performance: the dual-slot fuse holder well protects original circuit and provides a wire for the new circuit, safe and reliable to use in....
  • Convenient to use: you can easily plug the low profile tap adapter into an existing fuse holder, easy to install the additional circuits without....
  • Applicable occasions: you can use this fuse holder when adding LED strips, radar detectors, car alarm, cell phone charger, GPS, DVD player, dash cam....
Check Stock

10 Pack 14 AWG Inline Fuse Holder - 12V-DC ATC/ATO 14 Gauge Fuse Holder for 15A Blade Fuse

  • Heavy Duty 14 Gauge Red Color Wire Fuse Holder..
  • Inline Fuse Holder for ATC/ATO Blade Fuse..
  • Waterproof Lid for a Rainy Day, This item is Safe and Reliable..
  • High Quality, Supports 12V Fuse up to 15A..
  • Package Included 10 x Fuse Holder and 10 x 15Amp Fuse..
Check Stock

Nilight 12 Pack 12V Car Add-a-Circuit Fuse Tap Standard Mini Micro2 and Low Profile Fuse Taps 4 Types ATO ATC ATM APM Fuse Holder for Cars Trucks Boats

  • Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise.
  • Easy to use: plugs into occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.
  • Great compatibility: Automotive and non-automotive use for Cars, Trucks, SUVs, ATVs, UTVs, Campers RVs,Motorcycles,Boats,snowmobiles,and most general DC applications etc,covering such components as radio, light,etc. Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box.
  • Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity.
  • Package include: 3pcs Standdard fuse tap,3pcs Mini fuse tap,3pcs Micro2 fuse tap,3pcs Low Profile mini fuse tap,12pcs blade fuses..
Check Stock