Best Fusing Terminal Block

Lemonbest 2 pcs Waterproof Outdoor External 3 way PG9 Gland Electrical Junction Box Underground Cable Line Wires Power Cord Connector Protection

  • PG9 Waterproof IP65 Junction Box, 3 Way Plastic Terminal Strip, Pack of 2.
  • The junction box can easily be installed under the ground. Gives you full protection of the Cable Line. Suitable Cables Diameter: 4-8mm / 0.16-0.31″m. It is applicable to the outdoor lamps,landscape and lanterns connection..
  • Made of high quality plastic, it will not crack or fade in Sunlight, durable for years use..
  • It is used to install outdoor lamps and lanterns connection, wiring is easy to operate, more convenient and safer..
Check Stock

10 Set 4-Pin 5.08mm Pitch Male Female PCB Screw Terminal Block

  • Pin Number : 4P Pin Distance : 5.08mm/0.2".
  • Male Dimension : 16 x 7 x 7mm/ 0.6" x 0.3" x 0.3" (L*W*H).
  • Female Dimension : 16 x 10 x 16mm/ 0.6" x 0.4" x 0.6" (L*W*H).
  • Package Content : 10 Set x PCB Terminal Block.
Check Stock

GearIT Flat Speaker Wire Terminal Block Connector (4 Pack) for Hidden Invisible Flat Wire, Paintable Speaker Wire, Flat Low Voltage Wire in White, 4 Pk

  • WIRE TERMINAL BLOCK CONNECTOR - No need to drill holes into the walls or waste time using fishing wire to go through the wall. Use our Super Flat Speaker Wire Terminal Block Connector to get a clean speaker setup. Blends in with the wall for a hidden and invisible speaker wire experience. Can also be used with paintable speaker wire to blend in with the wall color..
  • MAX 12 - 23 GAUGE WIRE CONNECTOR - Compatible with 12, 14, 16, 18, 20, 23 awg speaker wire for acoustic surround sound for your audio sound system. Flat low voltage wire can be used as electrical wire with a max voltage of 35V..
  • WORKS WITH ANY SPEAKER – Transform your speaker connection like never before by being able to hide the wire or have a more professional look without needing to drill or open any walls..
  • EASY INSTALLATION GUIDE - 1) Cut edges of flat speaker wire. 2) Remove covering on both sides of copper wire 3) Insert flat wire into connector opening with adhesive side facing down. 4) Connect speaker cables to the wire terminal block connector to test the connection. 5) Attach flat wire to the edge of the wall. 6) Use primer and paint to paint over flat wire..
  • WIDE APPLICATION - Great application and use cases such as flat speaker wire, flat wire LED, flat voltage wire, hidde....
Check Stock

Fastronix 12 Terminal Power Distribution Block Kit

  • Rated to 240 Amps with a 1/4-20 Input Stud on a Nickel-Plated Bus Bar with 12 #8-32 Stainless Steel Terminal Screws.
  • 3/16" Mounting Holes on Each Side of Terminal Block.
  • Includes 12 Premium Double Crimp Nylon Insulated Ring Terminals.
  • Includes Hard Protective Cover (Red) and Flexible Stud Terminal Boot (Red).
  • Use with Fastronix Relay Panel (#900-004) and LED Fuse Panel (#500-043) for Professional, Protected Circuits.
Check Stock

CZH-LABS Screw Terminal Block Breakout Board Module for BeagleBone Black.

  • Terminal Block Breakout Module - for BeagleBone, BeagleBone Black, BeagleBone AI, BeagleBone Black Wireless, BeagleBone Green, BeagleBone Green....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • With power on LED indicating, with Power, Reset and Boot buttons on the side. The item has been soldered and assembled..
  • NOTE: the item not include BeagleBone Black moudle..
Check Stock

JQuad(Pair - Red & Black) 12 Terminal Distribution Block -BUSBARS- with Ring Terminals

  • 1/4" Stud - 12 Terminal Red & Black Power Distribution Block For a Variety Of wiring Scenarios.
  • Includes 12x nylon 16-14 awg #8 1x nylon 12-10 awg 1/4 1x nylon 8 awg 1/4 1x nylon 6 awg 1/4.
  • 12 Stainless Steel #8-32 Terminal Screws and Stainless Stud Will Not Rust Or Corrode In Wet Environments.
  • Use In Automotive Or Marine Environments Where A BusBar Or Junction Block Is Needed.
  • Rated For 180 amps @ 12 vdc = 15 amps / connection & Max Volts = 48 vdc.
Check Stock

Electronics-Salon Screw Terminal Block Breakout Module, for Arduino MEGA-2560 R3.

  • Terminal Block Breakout Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header..
  • FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Mega module.
Check Stock

Peplink Automatic Failover 4G LTE Mobile Router

  • 1 x 10/100/1000M Ethernet WAN Port | 1 x 10/100/1000M Ethernet LAN Port.
  • 802.11ac/a/b/g/n 2x2 MIMO, Simultaneous Dual-Band, Wi-Fi WAN & AP, Redundant SIM Slots 100Mbps Router Throughput.
  • 2x SMA Cellular Antenna Connectors, 1x SMA GPS Antenna Connector, 2x RP-SMA Wi-Fi Connectors, 1 x 10V- 30V DC Terminal Block, 1 x 10V-30V DC Connector.
  • Package Content: 1 x MAX BR1 MK2, 12V2A Power Supply, 2x Wi-Fi Dual Band Antenna, 1x GPS Antenna, 2x LTE Antennas, 4pin Terminal Block Connector.
Check Stock

Xiaoyztan 10 Pcs 12-Position Fork Type Terminal Jumper Block Wire Connector Barrier Strip 400V 12A (Black & Red)

  • PRACTICAL TERMINAL STRIPS - Our double row screw terminal strips can help you to connect bare wires to avoid clutter, while jumpers allow signals or power to be distributed neatly, making wiring connection simpler and more efficient. With Fixitok’s screw terminal blocks, you can quickly disconnect a wiring branch without removing the entire system..
  • SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide red and black jumpers to help customers distinguish positive and negative wire when installation..
  • HIGH QUALITY MATERIAL - The 4/5/6 positions terminal block strips are made from polycarbonate with flame retardance and nickel-plated copper with excellent electrical conductivity and anti-oxidation performance, to keep working stably and extend lifespan..
  • EASY INSTALLATION - Installation is a breeze. There are two screw holes at each sides of the terminal blocks, you just need to fix them with screws and connect cables. We provide 3 kinds of terminal blocks (4/5/6 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. For 8/10/12 positions, please search for B08D3J19FT on Ama....
Check Stock

KeeYees 60pcs 5mm Pitch 2 Pin & 3 Pin PCB Mount Screw Terminal Block Connector for Arduino (50 x 2 Pin, 10 x 3 Pin)

  • Package include: 50pcs 2 Pin Screw Terminal Block Connector.
  • 10pcs 3 Pin Screw Terminal Block Connector.
Check Stock