36 Feet 1/2-Inch Natural Gas Hose with Quick Connect Fitting for BBQ, Grill, Pizza Oven, Patio Heater and More NG Appliance, Propane to Natural Gas Conversion Kit - CSA Certified
【Good quality】Material upgrade - The propane hose is made of high-quality rubber, And connected with 100% solid brass connector, Has very good weather resistance, It is anti-cracking, anti-rust and very durable, Comply with CSA certification.
【Widely used】Has a very broad applicability, Perfect for Weber, Charbroil Grill, and more NG appliances, The hose kit is used to connect your natural gas grill to the natural gas supply.
【Easy to Install】Very easy to use and flexible, With quick-disconnect brass fittings on both ends, it is easy to attach and remove this gas hose as needed.
【Greater capacity】36FT 1/2 inch ID Natural Gas Hose - with 1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings, Supplies up to 135,000 BTU P/HR, provide adequate gas flow for grills and other gas appliance.
【Quality after-sales】1 Year quality guarantee, If you have any questions or needs during the use of our natural gas conversion kit, you can email me at any time and I will give you the best answer. You do not have to bear any losses.
EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)
【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
【Easy to install】: Quick disconnect simply push tubing in, no to....
JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV
...gh pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel....
2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS
...s .810" thick x 12.19" O.D. rotors with hats, Red Dynalite 4 piston calipers, drum parking brake assemblies with caliper mounting brackets, bearing retainers, BP-10 brake pads, and hardware..
*Front & Rear Flexline Kits with steel braided brake lines, caliper fittings, & chassis fittings to connect the calipers to the hard lines *Rear Hard Line Kit with steel hard brake line tubing to connect the chassis fittings to the included rubber hose, which connects those hard lines to the line on the frame *Rear Parking Brake Cable Kit, which connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission.
8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)
【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
FERRODAY 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4' Barb for Homebrew Wine Beer Soda Air Stone 0.5 Micron + 20 Inch Silicone Hose
[ Healthy Food Grade Material]: The Whole 0.5 micron diffusion stone is made of 304 Stainless Steel, which let our 0.5 micron aeration stone anti-corrosion & high temperature resistant & Durable. 20 inch gas line is made of food grade Silicone..
[ Unique Carbonated Flavour]: 0.5 micron diffusion stone produces smaller & finer bubbles which can make the gas combines with liquid faster. Make draft beer, home brew soda and other drinks more delicate, more exquisite and more fresh..
[ Various Use]: 0.5 Microns aeration stone is best for oxygenation & carbonation. Use this air stone to oxygenate wort and carbonate beer/ soda prior to fermentation. Works great for other drinks as well.
[ Connect With Fittings]: Attaching the aeration stone barb to a 1/4" ID hose, and the other side of the hose can be attached with the "gas in" post on a keg and then connect the keg with CO2 regulator..
[ Boiled Clean]: The 0.5 micron diffusion stone needs to be boiled in water to get clean & unclog the pores. Sometimes if the aeration stone get blocked, can be dipped in acid for 15 seconds and then rinse with water..
D.N. Industrial Grade Yellow Plumbers Teflon Tape, Gas Line Pipe Thread Tape, Twice Longer and Higher Density (1.3 g/cm3) Propane Yellow Tape Perfect for Gas Fittings (1/2\
Size and Quality: D.N. 1/2 inch yellow plumbers Teflon tape Thickness is: 0.004” (0.075mm), Temperature Resistance: -190°C to 370°C, Water pressure resistance:16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%.
High density: Yellow teflon tape density is 1.3 g/cm3 ( gram per cubic centimeter).
Material: Our plumber’s tape is made of PTFE material, which has high sealing and durability and gets CSA 20755, UL MH25811 approved.
Each roll of yellow Sealant Tape has a width of 1/2 inch which is suitable for for gas fittings. The length of this gas seal tape Model is twice longer as the same models.
plumbing tape has a sealing function to prevent the leakage, Yellow gas Sealant Tape Perfect for gas fittings.
